・Fabulous Paper Flowers: Make 43 Beautiful Asian Flowers - from Irises to Cherry Blossoms to Peonies With 270 Tracing Templates(Released on August 17, 2021) https://amzn.to/32d3IwP
I would appreciate it if you could read these books as well.
Hello I'm Emiko Yamamoto from Paper Decoration
Today for the day of the festival I'm thinking of making a handsome oni mask for those who are tired of the usual oni masks
First I would like to determine the position of the eyes on the mask
Please place a piece of paper on the face of the person wearing the mask and mark the position of the eyes
It is acceptable to circle it with a pencil but if it is difficult to draw with a pencil the
Dab a little water on your finger and gently touch it to the area you think is the right spot
Then the spot where the water is will be the position of the eye and where it will open
If the position of the eyes is
clearly visible due to the water I'll roughly
circle it How does that look
It's about 1.5 centimeters in diameter Roughly is fine I've
circled it now
If the water is still floating take in some moisture
I want to make a hole in the eye but of course it's okay to cut it open with a cutter
but cutting a small circle with a cutter is quite difficult
The sharp objects at home like safety pins
It's fine with these kinds of push pins but please prepare some with a slightly pointed tip
If I drill a hole in the desk like this it will get damaged and I also want a little more height
It's fine if it's a handkerchief or anything else like felt fabric or something similar to a duster
Just lay it down anywhere and carefully open it up
It's like making small holes along the dotted line when cutting a ticket carefully poking them one after another
By poking like this you can make a hole here since there's already a hole
Once the eye sockets are carved the current square shape is considered ideal so I cut it somewhat to fit the shape of the skin
I'll make sure to cut it properly later so please make it a bit larger as a simple square might be hard to visualize
I just cut it off in a casual and simple way like maybe it would better to shape the face a bit That's how it looks
I will make a left-facing eye Place a 5cm and 7cm black paper horizontally
It's okay to mark about a quarter from the top of the left side
I'll make a mark I'll use a white pencil to make the mark a bit clearer
I think you'll find that a regular pencil is better because you can erase it later
It's fine to mark approximately halfway up Place a mark on the right side about halfway
Connect these marks with a line This is how it looks If you don't connect them it's okay to use a ruler
Starting from here draw a line to the left and slightly to the right then draw a line from the lower right corner and cut along this line
This is the left eyebrow that was cut off
We will also cut the right eyebrow in the same way
Place a 5cm and 10cm black strip horizontally and mark a point approximately 1cm from the left edge at the bottom
Mark a point about one-third from the bottom of the right side and the top side is a bit to the right of the center about three-fifths of the way
Just mark it approximately Put a mark on the right side about one-third from the top
We will connect these marks with lines
So this is also somewhat stretched out like this right
We'll also cut this
I will create eyelids
The left eyelid is 7 cm and the right eyelid is 10 cm
We will curve it like a mountain
The left eyelid side will be curved so that the mountain comes from the left
This is the general idea
The right eyelid curve should be shaped so that the mountain is on the right side
This is the general idea
Draw a line at the bottom for the 22nd line
Draw the 22nd line in this way and cut it
according to the width of this 22nd line
It's a bit off but whatever
Let's just make it go inward by the amount it's off
If the curve looks unnatural let's cut and align it
That's the general idea
We'll also cut the right eyelid in the same way
I make a flower
Place a 5cm and 8cm paper vertically 8cm and 5cm long
Mark about a quarter of the way up from the bottom on the
left side and mark the middle area near the bottom edge
Draw a line from the top right corner all the
way to this mark like creating a curve of flowers
This is the general idea
Start from a little below here
and draw a line towards the center
We draw the 22nd line in the same way as the previous eyelid
It ended up being a bit too tight inside
Is that about right
I'll cut it off
It creates a bud
A 3 5cm black square a 4cm black square
this is to the left and to the right when facing it
Then I'll cut all the blue and white pieces that are square-shaped
This is how we cut it rounding off the
corners a bit It's
okay even if it's uneven
It's okay if it's not perfectly round
This is okay just like this an irregular round shape
This one will also be rounded off
It feels like it's becoming
rounded this part it's like this
I think it will become a bit more square-shaped but rounded
That's fine Make it look like there are
some square-like areas and some nice curves
Then the remaining blue and white are also rounded off in a similar manner
That's about it
The white part is also rounded and cut in this way
It's okay if you cut it too small
We will continue cutting like this
I will make a mouth
Place a 3cm by 12cm white paper horizontally
and mark a point one third from the bottom
From this corner here from here to the upper right
we will draw a line while making a curve at this point
That's about it
I'll cut it like this
I want to add a sparkling star next to the mouth
Fold another 2cm by 6cm white paper into a longer strip
When folding if you want to keep the fold ridge it's like this
from the bottom of the fold ridge towards the
center it's hard to describe how it feels
It should curve
in a large arc draw a curve
from here to the middle and then cut it off
It's like this
This one also has a curve
and it tapers to a point
and when you spread it out it becomes a shining star
Maybe it's hard to see in white
I'll leave a red paper here
This is how it will be this is how it will be
Make horns and teeth from yellow paper
Two pieces of yellow paper 8cm x 3cm
shape them as if drawing a large mountain
curve the top upward
It doesn't matter if the horizontal line is straight
if you cut along this line it will form a corner shape
Please make about two of these
This is the corner
The teeth are small yellow papers
Just cut it diagonally at the corner
That's all it takes
I will stick the face onto the mask
Since the eyes need to be in the right place I
will stick the smaller circle on the left side
Apply the paste and stick it so that the circle is hidden
It doesn't matter what the feeling
is but if you think the eyes are
too close we'll make sure the circles are placed towards the edges
I'll paste it like this
It's the eye on the right side
It's the larger black circle
I thought the circle might have caught the eye
so I'll stick it here I
think I'll place it a bit higher so
I'll put it slightly higher like this
This is where the circle is hidden
Next we will stick the sparkle in the eye
Paste a blue circle randomly
and continue pasting on both sides
I pasted it on the lower left There
is a large white circle I think two of
them I pasted it a bit to the upper
right so that it overlaps with the blue
I'll stick it in the upper right corner
Something like this
Also I think there were three small white circles
There is one on the left side which has small eyes
The eye on the right side is slightly larger
Let's put two in there
It didn't stick now
I'll just stick them wherever there's space
Now I have sparkling eyes
Next I'll attach the nose
Since the nose can't be reversed left and
right I'll check the side that has the adhesive
I'll apply it and then stick it on
I think it's okay if it overlaps over the left side of the eye
I'll stick it like this
Next I'll apply the eyelid tape
I'll place it on the upper eyelid of the left eye like this
If your face is small or your eyes are close together
and if this part is long it's okay to cut it off
It's fine as it is
This also has a front and back so be careful
This is okay even if it overlaps on top of the eye
From the corner of the eye is it like this
If you think it's long it's okay to cut it here
Continue turn left
Apply the glue to the left eyebrow and stick it on
Also this line of the eyebrow
I'll apply the bandage over my nose eyes and the corners of my eyelids
I'm done with the left side Now I'll do the right side
We apply it to the right eyelid in the same way
You can also try it and if it seems too long it's okay to cut it
How about this This is the general idea
Let's stick it on
If it's too long it's okay to cut it here
It's okay if it overlaps on the eye
We'll also stick on the eyebrows
I got carried away
These are the eyebrows look like this
You can cut the angle and width as you like
Then I'll stick on the mouth
Apply the texture all the way to the edge here in the middle I'll stick
my mouth here but it looks more natural
if it's a bit higher on the right
Lift your right hand up
like this Apply the teeth like this
This part should be a right angle
Apply it to the upper lip where the upper teeth are
Apply it to the desired spot where the teeth sparkle
It's better to apply the tape all the way to the tip since it's narrow
This is how it looks
Now the face is complete
Now I've managed to put a face on it
The face is a bit puffy right now
so I think I'll make it a bit slimmer
At this point
it's okay to cut suddenly but I think it's
better to draw a bit I think I'll remove the cheek here
Let me break it down a bit jaw
Here I'll trim the jaw a little
Around the eye area this is roughly where the blind spot is
Press it into your eye and feel like it's connected to your forehead
Let's cut it like this
Something like this
Please adjust according to the size of the face you are putting it on
Now there's nothing on top of the head like hair
I think any color would be fine Whether you make it blonde or black I think that
would be fine too Today I
have prepared a light brownish color
This is how it feels I'll temporarily
trace the shape of the forehead
Then you'll understand where to put the hair so
do it like this and then show the part you want
For example I want to have this kind of hairstyle
Then write it like this
It seems we've come this far so I'll take it off for now
I might not go to the place I wanted to go from the beginning
I think it's better to write a bit
more but I'll cut it once like this
I'll roughly chop it before it starts to spin
I think you can wear any kind of hair
If you have yarn at home I think it would be cute to make a fuzzy ball with it
First I roughly cut it
What will it look like
It looks good
Now I'll add the oni's messy hair
It becomes a messy curly head when you cut
it like this curving it round and round
I've drawn a clear line so even if it's not exactly what I said
Please erase the pencil lines with an eraser later
I'll cut it all at once
Once I have the messy hair I'll stick it here
Yes the hair has been attached
Now we will finish it as a mask
I just opened it carefully a moment ago so I want to open it properly again
Please lay a cloth underneath as before
We will make a hole with the pointed object here
Just open it like this
Now both eyes are open
This is the feeling
I want to attach the strings for wearing the mask
First attach the ears on both sides and then attach the strings for putting on the mask from the ears
Attach the ear hooks and tie the strings
You didn't put any horns on it Let's add some horns later
This is two pieces of red hair and long hair
I think this is the last remaining hair
This is about two centimeters I suppose
We bend it as needed
You can just fold it and it's not really visible anyway so you don't need to
worry about it but we'll cut it in a way that looks like the number 3 on the ear
This is the opposite because of this
Is it made from the top of three
It will stick on both sides like this
This is where the glue will go so I'll apply the glue here
Let's make sure to apply the glue firmly here
This is where the fold is
Apply it firmly maybe around the side of the
eye Around the side of the eye
Stick this one on as well about the side of the eye
What would it look like from the table
This is how it would be
If you have a head size I think it's best to
just adjust it according to your actual head size
I've folded both sides in about 5 centimeters like this
I think it's okay to have three but I folded it about five centimeters
Apply glue then apply glue to the ends of the fold and the opposite side as well
I'll paste it here
Press it down like this is it like this
Attach it flat as well
I will place the rubber here and attach it to this part
We'll also insert a rubber sheet here
Since I want to apply some glue
here let's remove the glue first
Attach it insert the rubber and stick one side
It's fine if you staple it
It's okay if you staple it firmly instead of using glue
Now that it's like this
Insert it through this rubber
Paste it here and you're done
It's finished Enjoy wearing it
Try making it