#diycrew#hrvdiy#renovision Knowing the Right way to Silicone a Bath is Handy, Knowing which type to use is Vital. Learn how to get a Perfect Finish every time! When it comes to diy Bathroom Renovations, the one secret most people do not know about is how to finish the job with a great seal and a great look and the perfect finish every time. In this quick tutorial Jeff shares his years of experience so you can finish your project like a pro and impress even the most discerning eye!
Bathroom Reno series part 7 of 9
Produced by: Home Renovision DIY 2020 Video & Editing Services Provided by: Subdivision Film LTD. https://www.SubdivisionFilms.com
Disclaimer: Videos produced by Home Renovision are provided for informational purposes only. All material provided within this website is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. The DIY instructions used here are used to simply breakdown projects to their simplest steps. Please use a clear mind and use all safety precautions while following the tutorials provided by this site. Home Renovision does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing projects on their homes they are doing it at their own risk and Home Renovision cannot be held liable if they cause any damage to their homes. With different codes around the world and constantly changing standards, regulations and rules, it is the sole responsibility of the viewer to educate themselves on their local requirements before undertaking any sort of project. That being said Home Renovision cannot claim liability with all applicable laws, rules, codes and regulations for a project. Be safe, have fun renovating and ALWAYS stay informed with your local building code.
In this video I'm going to show you how to install silicone. Now this is not painter's caulking,
this is an actual silicone. This is a professional grade stinky stuff and if you don't do it right
you're going to make an absolute mess. So I'm going to show you all my tips and tricks for
putting it in and make it look pretty. So we're pretty much at the last stage of our project and
this done the tub, the shower, the tile, the fixtures, we're all done. So now it is time to
do the silicone. This is the last step that we have to do to finish inside the tub surround
and there's a few tips and tricks that I'm going to share with you so follow me along with as we
go through this. When I'm doing a tub shower I always want to have two types of silicone. One
is a clear and the other one is my white or the color that matches my stone. If I'm going with
the natural brown stones of course I use the beige, there are grays and there if you go to a
nice supply store you can get silicone in about 15 different colors. Okay so don't be afraid to
shop around and make sure you're going to get the look you want when you're done. But because we
have a glass mosaic I'm going to start with my clear silicone and we're going to do all the clear
silicone areas at the same time and then we'll switch it all over. Okay so here we go. First
remove the tip. Now my caulking gun has a cutter on the side, makes my life simple. Boom, done.
All right and then I also have this little wand that's attached to it. It's a little filthy here
and that is used because the tube itself is sealed and I have to puncture the seal
so that I can have the silicone be released. Once I'm done it sits back on the handle,
put it in the cradle and line it up. Now I cut it on a bit of an angle on purpose
because I find it easier for installation. One of the things you need when you're silicone is you
want to keep your hands clean and keep your area clean as you go and because we punctured it with
a dirty stem I'm just going to start off by cleaning it out and making sure what comes
out of the tube is exactly perfect. Now because it's glass mosaic if I use white silicone here
over top of my grout I'm going to get a really uneven nasty line on all my glass.
So I'm just going to start right here and I'm going to just run a nice little bead
there. Okay I'm going to put my dry finger on it and as soon as I feel like I'm getting a lot of
buildup I'll pull it off. All right done. That's simple and in this corner just a little bit of
pressure. On this particular gun when I let go of the handle I have to put a thumb pressure here and
that releases the pressure inside the tube so the caulking should stop coming out and we'll just
start with the dry finger. The other place I need clear silicone is on my fixtures to my tile wall.
Now depending on the stone that you use you may or may not need to do this but because I did a
subway tile I have a little bit too much texture on the wall and too many grout lines interrupting
my installation so I want to make sure that the water that's running down this wall can't get in
behind my wall. Now I don't need to go all the way around but I want to just start at the top
with a dry finger of course wipe that on my towel and then come the other way.
There we go. Now next thing I want to do get a new towel. I'm going to show you my little trick here
wrap your finger in your towel and set it on your plate. Use your other finger against the plate
pinch your finger and then just run it around the plate. Okay what this does is it makes sure
that it cleans the silicone off of the chrome nice and tight to the wall so it has a good looking
finish. We also want to do the same thing to our tub spout and here we are again we don't need much
there's not a gap here really but I hear a lot of people get quite concerned about this scenario
and they're probably right to be. I mean even though we have a waterproofing system there are
holes in the wall and this is the most common penetration point is around the fixtures.
Just a little bit of pressure here you don't want to put so much pressure you wipe it all off
and at the same time you don't want to leave it on there either. Okay now I'm going to clean that
similar system for wiping that off only this time while I'm holding the towel I pinch my finger and
stick my other finger and I use it like I'm scribing. Okay there we go now remember when
you're buying your silicone at the store if you're going to the building store they have usually
three kinds all right they've got kitchen and bath silicone and then they have kitchen bath mold and
mildew resistant and then they have kitchen bath mold and mildew resistant but it's really awesome
and it's going to last 20 years. I have never seen a bathroom that had caulking that was 20 years old
that didn't need to be replaced so I don't spend the extra five bucks for something that tells me
it's going to last that long. I only get the 10 year and the caps snap right back on again yeah
no don't lose your teeth it is only plastic though I mean really yeah now there's a lot of debate
about silicone in your bathtub. I've seen people say you shouldn't grout the inside corners don't
grout the tub to the tile wall shouldn't be grouting to the ceiling. I like to do all the
get it all sealed up because when I silicone I only do one application I don't want to have to
put so much silicone in there that it's just making a huge mess I don't want to have to tape
the ceiling and tape the walls so if I grout first then I have a backing for the silicone to bind to
so what I do make sure you wear your shoes when you do this or you'll slip right off in your socks
start from your inside corner with your tip angled like this so when I'm applying my caulking I'm
pushing it out in front of me but I'm not scraping it off the back I'm going to just
leave enough there that I'm filling the hole and really this takes a little bit of practice
to have the right amount of pressure if you're not comfortable with this you can always tape it and
then you can wipe it and then you can pull the tape off later but this is the best way to do it
right here okay again dry finger and really I'm just connecting the ceiling to the wall here
and that's it I'm feeling there's too much okay so I want to have my rag with me
come back you have to leave and come back again come back a couple of inches
and gently into the corner and slowly apply your pressure again all right bam okay so generally
I'm working my top down okay I want to be able to clean as I go and I start in the corner
and I pull and I clean you can see the difference where the caulking isn't where the caulking is
it's a very easy visual thing to manage let me get my tip proper here there we go
you just run it along move the caulking gun just a little bit ahead of the caulking
now you always wipe back towards where you were just like doing drywall mud on your ceiling joints
so what we're doing here now this side of the wall because the room wasn't level and square
I have a pretty significant grout gap and when you only silicone the grout to the ceiling but
not the tile you're really going to see it show it'll always scream at you so I did the top joint
and now I'm filling in the bottom while the top is still wet blending them together here okay so
instead of my finger on an angle like that I'm going more straight along now I'm trying to fill
this gap with the silicone right down to the tile okay and I don't know about you but I am pretty
darn pleased with that okay the next is you're going to bring it down from the ceiling inside
corner and we're going to just fill that in concave now there's cut tiles and different
joints going on here remember we have clear here so don't run into the clear what you want to do
is use your thumb and just push it back and start right at the joint of the tile okay
so visually I want my silicone to start where my tile is okay and even in the grout it's fine but
bring it down to the glass that'll just look really cheesy and it'll scream
so now start up at the top with your finger press it in run that down dry
done okay of course keep in mind always looking to see if the tile has been polished properly
okay if there's any dust on there just take a second and get rid of it you don't want to be
attaching your caulking to dust or it'll just end up wiping away all right so we're done
silicone in our walls now with the silicone the tub but before we get down on hands and knees
remember when we originally were working on this project if you haven't seen this you got to watch
the other videos we were removing the wall without damaging the ceiling which is tough because I had
drywall tape now we've installed our tile and we've used the silicone on the ceiling that
ceiling's already finished paint if you're in a situation where you have to paint your ceiling
you only have two options you can wait to silicone and until after you're done painting
or if you're just trying to touch it up and you have silicone in the ceiling you can actually
when this is dry you can put painter's tape over top of that to create an edge and then you go to
the store and you buy a can of kills k-i-l-l-z it's in the paint department in an aerosol can
and you just a couple of quick shots of kills on silicone and you can paint latex paint over
top of that and you won't run into any problems okay so the last thing we have to do is silicone
around the tub to the tile to create that nice clean joint now remember it's not part of the
waterproofing process but it is part of what makes it look pretty now if you are not familiar with
acrylic tubs and you've only used steel then you can just go ahead and do it with a steel tub you
just do the seal and walk away but if you have an acrylic tub there is something you have to do
before you silicone and that is put weight in the tub okay and the best way to do that
just turn on the water and let it get about halfway full now the reason we have to do this
is because this is a very flexible material and although it has supports and all kinds of
spraying underneath if i was to demonstrate any other technique for a large majority of
tubs that are sold out there you're going to be very disappointed not every tub has as much
support underneath it or as much reinforced spraying with the fiberglass underneath so if
you go to the hardware store and you buy yourself a tub and you get a great price on it it's probably
because when you fill it full of water it's going to sink okay and it's going to pull away from the
wall a little bit and so if you add the silicone when it's empty when it pulls away it'll break
the joint on you and then you'll get all the water and the dirt in behind there and even though it's
waterproof it'll start to go ugly because it'll trap all the colors from the dyes and the shampoos
and the dirt off you and then before you know it a couple weeks goes by and your silicone joint
looks like garbage then you got to do it all over again and that's a lot more work than doing it
right the first time so same kind of process we're going to set our gun into the corner
and we're not going to add too much like again i've already grouted that joint
and i've grouted the joint because i use a tub that's reinforced and it has feet and i know it's
not going to be moving around too much so i'm not going to get that breaking out take my cloth set
my finger in the corner i was feeling a lot of silicone there okay so that was too much so what
i do is i push against the back wall and not on the bottom and i just clean up the edge there we
go now a lot of this is just experience but a little bit of practice and you can get really
good at this i would suggest if you're going to do a renovation project like this before you tear it
apart cut out the existing silicone on your ugly tub and tile and then try sealing it again just so
you have a chance to get some experience with the product that way when you're ready to do your
finishing work you already know how kind of pressure to use and how comfortable you are
with this kind of process now this is incredibly important here you get good pressure on this
silicone because this bond is part of your waterproofing system this is not just for
being pretty most water that penetrates between the tub and the tile is in this wall area right here
there is no waterproof joint after the silicone between the wall board and the tub
this nice light bead i'll leave a little bit of a dollop at the top of course now the pressure i'm
using here i want to actually feel the tub and the tile with my finger on both sides
and then rock around the corner here there we go nice clean look okay we got one more ride going on
i can't stress the importance of having clean towels around toilet paper also works but the
nice and durable okay so now we're ready to do the last joint which of course is the tub to the tile
make sure you vacuum clean make sure there's no dirt and the same thing okay you want to just
leave that bead really consistent here move at a nice consistent pace with consistent pressure
and you'll end up with a great result okay now this is part of the waterproofing system
this silicone here is actually going to keep the water from getting between the tub and the floor
tile so i'm actually trying to force it in the gaps out here that's why it takes a little bit
more effort to get a good look because i'm actually forcing it in there pretty tight
i'm getting it up the side of the wall of the tub and all across the floor
so like i said it's a little different process here okay this time i'm going to put all the
pressure on my finger on the floor and not on the tub just so i can move that line back
you can only do this with a dry finger if your finger's wet you're just going to smudge it around
and make a mess so remember the last thing you got to do is take a look at your wall tile and
your floor tile and think about the water that's going to potentially be coming over here especially
if you got young ones having a tub in here seal this area as well just a tiny little bead so it's
almost insignificant okay and there's two things you're doing here one you're getting rid of any
little gaps and cracks in your finish so that it always looks pretty this is also cosmetic
but by filling this up with silicone you're also waterproofing this joint okay so that's
about everything you need to know to apply your silicone again the steps are pretty basic
lots of pressure make sure you fill your gaps make sure the surfaces are nice and clean
and then let it dry don't be in a hurry most of these silicones you want 6 12 even 24 hours
so read the instructions on the can they'll all have that information there let all this sit with
the water in the tub overnight for sure and then maybe in the morning you can come by and drain it
and wash it all up and see if you've missed anything if you've missed anything you want to
get this touch-ups done within 24 hours okay if you let it totally perfectly clear and then
you add silicone on silicone it doesn't bond very well so the next morning is the time you want to
have a look if you got any air bubbles go address them right away and your bathroom will stay nice
and dry