Snow Peak - Titanium French Press Wie machst du deinen Kaffee | Coffee Camping

Coffee camping
198 followers
11 Video Views·Oct 8, 2022
Here I show you the Titanium French Press from Snow Peak with a weight of only 200g. How do you prepare your coffee? Have fun with the video.
Friends, I wish you a nice Sunday. I hope you already had your first cup of coffee.
I definitely and will now cook the second one.
For this I use my French Press from Snowpeak, which I wanted to introduce to you today in the video.
I have had it for over 5 or 6 years now.
It's a very loyal companion of mine. It's made of titanium, super light.
I also use it at home sometimes.
I think it's just a very good variant to prepare your coffee outdoors.
There are definitely more methods.
I will also go into this in a separate video.
There are really cool variants on the Internet now.
I introduce you today.
But before I start, I have a question for you.
I am currently looking for a coffee grinder manually.
I have already seen a few, but I have read the ratings.
Painting is bad, layered out, plastic parts installed.
If one of you can recommend a good coffee grinder manually,
write it in the comments below.
Now the video starts. Have fun and see you soon.
The French Press from Snowpeak made of titanium
weighs an incredible 200 grams
and is therefore inconspicuous in weight and always with me.
In addition to titanium, however, some plastic or silicone is also processed and stainless steel.
The whole thing comes in a quality that I have rarely seen.
Absolutely high quality and built stably.
To hold the French Press, two ergonomically shaped handles are used,
which are loose and cannot be locked.
Before heating, they should definitely point outwards.
So that the lid does not suck in and the air can escape when the stamp is pressed down,
there is of course still a small hole on the top.
The press rod is used through a small plastic insert,
which runs perfectly after more than 5 years.
The volume of the French Press is 0.7 liters,
which is very good for two larger coffees or three smaller ones.
Inside, the lever is punched in and also shows the amount of cups.
The outlet has been adapted in the form and the coffee can be perfectly dosed or poured.
Here is the press stamp with its individual parts or the scope of delivery.
A total of two sieves are supplied,
one very fine made of plastic and one made of metal, which I always use, for example.
The whole thing is then screwed together according to choice and the stamp is ready for use.
Here also plus points for the thread quality.
Also after all the years, no problems.
Then the water can be brought to a boil.
I always take the two cup markings for a cup and thus have a good full cup of coffee.
After heating, let the water cool down for a few seconds, add coffee.
I always orient myself on coarse salt when grinding,
then stir, put on the stamp and let it sink in minimally.
Then let the coffee sit for 2 to 4 minutes, depending on the need,
and then carefully press the stamp down so that no hot water splashes up.
Pour the finished coffee into the cup and enjoy, that's it.
Let's come to the conclusion.
Very good coffee, I really have to say.
French Press is just a good thing to make coffee.
At home I also use a V60 filter,
but it is often a bit too strong for me or too ... I don't know.
Sometimes it just doesn't taste, it's difficult, I think.
Coffee is high art anyway, in my opinion.
Tips are welcome in the comments below,
if there should be a few baristas among you.
But I always like to cook coffee with different methods.
My three top methods at the moment are French Press, V60 and Turkish coffee,
i.e. in the Cezver.
I think these three variants are very good, because I often get used to good coffee.
If I drink V60 coffee for several weeks in a row,
then at some point I drink it and I don't like it anymore.
Then I do it with the French Press, then it works again.
Then it doesn't taste anymore with the French Press,
then I take coffee with the Cezver.
So that's my thing with making coffee.
I don't know what it looks like for you,
you can write in the comments below.
That was the Snow Peak French Press.
I like it very much.
There are just a few little things that bother me.
It is very narrow and with my Primus it is a wobbly affair,
you have to be careful.
Otherwise I would have liked to be able to fix the handles somehow.
Because if you forget to turn them away from the pot
and you already have hot water in it, then the handles are always hot,
you often burn your fingers.
That bothered me too.
But of course it's just complaining on a high level.
This is a Titan Ultra Light French Press.
Of course you can't expect handles with rubber covers or anything else.
I can't complain about the part.
I think it's brilliant.
The quality is top notch.
As I said, I've had this thing for ages and there's nothing to it.
There's not even a bolt in it.
I just throw the thing in my backpack with all the other equipment.
Really a very, very solid part.
I can only recommend it.
Otherwise be careful when you make coffee with the French Press.
Often the first press is very difficult
because the coffee just deposits up there and then condenses.
And if you grind it too finely,
because you might have a bad grinder or you just can't adjust it well,
then it's too fine and you press and press.
Nothing happens, then you press too much
and then the hot water comes out.
I've burned my hands on it very often.
So just be careful.
I would say that about the French Press.
Otherwise, yes, very cool.
Enjoy your coffee outside.
Write in the comments below how you prepare your coffee outside.
I'm enjoying my coffee now.
And then of course I'm always happy when you stop by on Instagram.
In any case, leave a subscription there, leave a like.
And then we'll see you at the next video.
Take care, have a nice day.
Until then, ciao.
