Traditional Carpentry in Southern China-07 Assembling

Traditional architecture of countries
159 followers
11 Video Views·Sep 30, 2022
This series of documentaries are about the traditional carpentry in Southern China: the lives of the carpenters, their tools, their design methods as well as the procession and assembly of a timber structure, It was film in Zhejiang Province, China by myselfduring my gap year as an architectural student in Harvard Graduate School of Design.
Cre:
Chenchen Lu/Traditional Chinese Architecture
Next the roof framework needs to be set
up Start from the clouds The two
teachers each climbed onto a wooden frame
and placed the brackets on four pillars
Lift the beam with a rope
and place it on the cart
Then insert the two water channels on
the beam support with a wooden mallet
The vertical beam is placed on the beam frame
then a round hole is connected between the vertical
beams finally the main hole is placed and the
main framework of the cloud chamber is completed
They also built the roof framework in the order of ridge cutting the
beam water opening straight tube round hole and hole passage in each room
Then place the rope on the cutting slot of the beam insert the
sub-frame and let the drawer wood
fall exactly into the rope slot
For the right foot pavilion on its column top
besides a crossbeam the
rest are flagstaff heads
Because all the water ports and sub-frames are
at a 60-degree angle with the two board heads
Master Oki reduced the error by adjusting the
water port and sub-frame of the right foot pavilion
All are processed on-site to display
the left foot's water opening First
a template reflecting the water
opening's contour must be made on-site
To determine the straight line at the water outlet
Teacher Guangyu used a very clever method which
was to use a wolf support ruler to find the cutting
slope then to trace along this slope with a brush
Draw a rectangular line at the water opening
Subrack management completed
Then insert the hexagonal middle
tube into the middle of the beam The bottom of the
middle tube has a tenon
Each side has a hair
hole to connect with the tenon of the claw
Then lift the claw to the ceiling
because one end of the claw is placed on the water outlet
and the other end is inserted into the middle tube
the angle between the claw and the middle tube is difficult to determine
Therefore its bamboo shoots are all processed on -site
Another one is cut above the water outlet a
claw pit must also be carved out on the water
outlet The shape of the claw pit is relatively rough
It is preferable to have a stable placement with the claws
The insect claw is nailed onto the claw The
function of the insect claw is to further extend and lift the outer corner of the eye The insect
claw and the claw are connected by a claw pad
Adding the insect claw to the claw to maintain
the continuity of the roof line from the water
mouth to the claw back a similar triangular
vine claw must be added on both sides of the claw
To hold the boat near the claw
It also serves to fix the vertical surface formed
by the claw and the insect claw from both sides
Add a fairing between each pair of claws The fairing is also processed
on site according to the angle and surface shape of the claws
Thus the basic structure of the basket and the pavilion was completed
After all the basic frameworks are completed it'
s time to start nailing the ship's frame For the basket one end of the frame is placed on the
moving track and the other end on the support frame
The boat lines are drawn on both the bow and stern frames
For the roof structure the column center
line is a crucial control line during construction and
the ship nails also start from the column center line and are nailed outward in both directions
Next nail the curtain panels
The curtain panels are continuous
After the face nails
are fixed lift each boat
with a ship and nail the boats onto the face
The hexagonal boat starts nailing from the center line of each side
The sterns of the boats must all be tapered The tapering angle
was made by Da Mu Lao Si on site based on visual judgment
First nail the ship's nails in the middle part of each side that connects to the sub-frame
The ship's nail at the corner is placed on the frame claw
Wait until the curtain is fixed and then nail it according to the curtain's curve
Nailing a hexagonal curtain is a challenging task
This task requires at least
three people: two people
sit on the footbar and control the two ends of the
curtain while one person holds the boat and sits in
the middle responsible for pressing down the curtain
Align it with the bow
The intermediary can also go under the roof
and pull the curtain's middle part slowly
downward while the two elders push the curtain's ends until the claws are exposed
The process of bending the veil is very
dangerous because the curve is large
and the veil is prone to breaking so it should be soaked in water first
Be as gentle and slow as possible during the downward movement
After the face is nailed on the corner can be shaped according to its curve The bottom
of these pieces also needs to be tapered so
that the whole thing spreads out like a drum
Then you can cut the bow according to each curtain
Cutting the bow is an extremely hard job
It requires cutting three boats with one saw
A saw must cut two planks at the
same time and when the plank closest
to him is cut through he has already started cutting the third plank
That is why it is called "one saw three boats"
This ensures that all the boat bows are on the same plane
and are cut very neatly
To prevent people from seeing the ship's bottom the old shipbuilders also need to nail a layer
of deck planks over the ship's bottom
These planks are nailed between the two ships
Nail the double boat to the roof panel
One end of the double boat is nailed to the curtain of the lower boat
The other end is nailed to the roof panel
The double-hulled boat was called Feizi during the Song Dynasty
It is a flat-bottomed boat
Its stern is tapered to fit the roof surface
The wooden boat needs to have its canvas cover nailed on after the frame is completed
After the face panel is nailed in place the bow must be cut again and a ship's bow should be nailed
to the back of the face panel to make the transition
between the face panel and the roof smooth and gentle
Also nail boards between the double skin
boats to cover the roof tiles The hexagonal
pavilion needs an additional layer of
boat planks to make the upper part steeper
That section is basically complete
From the preparation and processing
to the treehouse it took more than
three months Every day I studied
with Master Da Mu I had new surprises
Amazed by the clear logic and clever methods of traditional construction
Amazed by the delicate handling of space and structure in traditional architecture
What moved me even more
It is the intimate relationship between people and nature and the love and
respect people have for their home that
is embodied in this approach to creation
Understanding the construction process of the Nanshiyang
wooden buildings can help us better appreciate the traditional
architecture of Nanshiyang Understanding them and knowing them
are the prerequisites for appreciating valuing and protecting them
I hope this record of the Okiza is just the beginning and that more and more people
will take action to record and pass on these
traditional crafts that we can be proud of
Traditional architecture traditional buildings traditional construction industry
