For small businesses: US:https://bit.ly/3dRrEPF EU:https://bit.ly/3y4WLy5 Productivity Kits & Materials kits with exclusive discount + extra 10% off coupon: XTOOL10OFF (Valid Date: 9/21 - 9/30)
Time Stamps: Intro - 00:00 Specs and Setup - 00:24 Initial Tests - 2:32 Metal Tests - 4:17 More AI Batching - 6:36 Trying the Cutter - 7:28 More Engraving - 9:01 Engraving 3D Prints - 10:09 Rotary Tool for Cylinders - 11:51 Bonus Engravings - 13:31 Final Thoughts - 14:04
My go-to PLA is Polymaker PLA Pro. Not only is it easy to print, it is extremely strong. Not a paid sponsor - I just love using it! https://bit.ly/3rNdd3f
Follow now for more free giveaways and 3D printing tutorials! Visit http://3dprintgeneral.com/ for products I have used in the past and approve. You can also rep 3D printing and support the channel via my Merch Store: http://bit.ly/2GidwfQ
Hey everyone, back today with a review of something that isn't a 3D printer,
and that is the X-Tool M1 Hybrid Laser and Blade Cutting Machine.
Alright, before I start this review, I need to preface by saying I'm anything but a laser pro.
I actually haven't really worked with one since I was at my old work back in 2015,
when we would occasionally use a professional laser engraver.
So you might see me do things in this video that could have been done better,
but luckily for me, X-Tool does make this process pretty easy for even a noob like myself.
I've actually been offered dozens of laser engravers for review, but I've turned them
all down. The two reasons for this is because A, I'm not experienced with these machines,
and B, all of them were not properly enclosed and filtered. Aside from the fumes coming out
of these machines, likely to be very unhealthy to breathe in, they also can smell quite bad.
I work in a spare bedroom in my house, and the last time I used a laser engraver,
the LOTMAX Shark 3D Printer and Laser Engraver,
I had a pretty upset fiancé when my house stunk of burnt wood and leather.
I agreed to review this X-Tool M1 because not only does it seem user-friendly to someone
unexperienced, but because it's fully enclosed and they sent me the full package,
the one with the air purifier. This adds a decent amount to the purchase price,
but I can't suggest it enough if you're in a similar situation as myself.
This package also comes with a premium material package for me to do a ton of tests on it,
and it also comes with a rotary accessory so that I can engrave on cylinder objects like a tumbler.
This unit came with the 10 watt laser, and what makes it extra unique is that it's a hybrid,
since it also has a blade cutting tool on it, which allows for vinyl and similar materials
types so you can really get creative in your projects. It has a 16 megapixel smart camera
for easy engraving, and it also allows for AI autofocus and AI batch processing
to auto-place your images. The base model without the purifier and additional parts is only $899,
but the unit I was sent with the purifier, rotary tool, and 10 watt laser cost a hefty $1,838,
with there being different packages in between those two. There is a 10% discount going on,
but it's only for another day, so make sure you act fast if you do want to get this.
As you can tell by the unboxings you've seen on the screen, this is a pretty hefty unit,
and I hope I can do it justice in this video. But rather than just showing off the amazing
parts it can create, which I do attempt, I think this video would be better to show off
what makes this X-Tool unique and so easy to use. It's also quite hard to show off everything this
thing can do and test out all of the materials you can engrave and cut in a video that's under
a half hour. This video is already quite long as it is, so I'm likely going to have to take on more
projects that utilize this machine in the future. My first test engraves and cuts are on their
provided 3mm thick base wood. If you use materials provided and sold by X-Tool, it obviously makes
this process easier, since they've already figured out the best presets for speed and strength,
but you definitely aren't limited to just them. They also include this metal triangular prism,
so you can raise your parts without needing a honeycomb base. And here's that first awesome
feature that this unit has to help out noobs and I'm sure even professionals, it's built-in camera.
Just look how easy it is to see what you'll be engraving and to make sure you're placing your
image or text in the correct section. They have a built-in preset for this basswood, but you can
actually type in the actual thickness of your part you're engraving or even use their auto measure
feature which will figure out how thick your part is automatically. This is very important for the
machine to know in order to focus and to have the proper strength, as well as to make sure you're
placing your image in the correct location depending on how high it's raised off of the base.
And there really is no work on your end to use it. These first tests were just to make sure I was
doing everything correctly, but it's worth noting that they make sending and framing extremely
simple. Very impressed thus far and very happy that I have the filtration because there's essentially
zero smell. After these basswood tests, I wanted to start and use some of their more unique material
options to see what this laser engraver can do. First up, I go with a metal dog tag. I was really
excited that this might be able to engrave onto metal, and I get very ambitious by including a
grayscale image of my dog's face along with her name. Now I have to mention that you should trust
the image you see on the X-Tool software if you're using one of their pre-selected materials with the
proper height. When I ran my framing, I thought I was engraving a little too high on the tag,
so I moved the image lower than what the picture on their software showed me. This was a mistake
because the image on their software was spot on, and I ended up engraving this a little lower than
it should have. That said, I don't think you can get a better engraving. I thought I was pushing
the limit of this thing by including an actual picture, but it came out beautifully. You can
definitely tell this is my dog, and her entire face is only slightly larger than half of an inch.
That is some precise and impressive engraving. The other included dog tag is more shiny and
slightly smaller, so I end up engraving slightly too large for it, but it once again impressed me
by the fact it can not only engrave onto metal, but get some really high detail. While on the topic
of metal, I went ahead and also engraved on their provided metal business cards. This is also when I
wanted to test out their AI batch engraving feature, which is one of the coolest parts of
this machine. I design a simple card front, and then throw in a few different cards randomly into
the machine. After just placing one image onto one card, I try this batch feature, and it auto-rotates
and places the images onto the other cards. That is just so cool. That said, it does show one issue
I noticed here and in future tests. Items that are black are very hard for the camera to pick up.
I'm not sure if we added a lighter color base this would help pick up these black cards,
but the AI didn't notice them, and therefore didn't place my image onto them during the AI batching.
This was only an issue for me on very dark black items. Unfortunately, it is very hard for me to
actually film the engraver engraving, but that's a good thing because of this is to help protect
your eyes so you can actually look while it's moving. And it auto-rotated and batched these
cards pretty much perfectly. I went ahead and manually placed the image onto the black cards
as well, and you can see all of these on the screen now. This can definitely make for a unique
way to promote your business. I wanted to show off this batch feature even more, so I went ahead with
these provided wood tags. I went with a simple logo on the front, and then a QR code to my YouTube
channel on the back. I just randomly threw them all into the X-Tool, placed one image, and then
batch featured the rest, and they all once again rotated and placed the image onto all of the tags
perfectly. Well, almost perfectly. It does seem that my logo was placed 180 degrees from where it should
on one tag, but every single other tag was in the correct orientation. And then the QR code actually
works. I can imagine this feature would save creators and Etsy sellers a ton of time when
wanting to batch a lot of items. You don't have to worry about placing your part in exactly the
correct spot or correct orientation, and you don't have to manually place your images. This is honestly
one of the best features on this X-Tool, and it comes stock on their base model. Next up was to try
out the cutter on this machine. To use the cutter is once again very simple, since it's just magnetically
held into its holder. I then get to using their provided self-adhesive PVC sheet in blue to cut
out my logo as a vinyl sticker. To do this, you would need to use one of their provided cut pads,
and you'd want to use the light blue grip mat for this particular material. These cutting mats stick
to the bottom of your base, and then have the vinyl stick to the cutting pad to make sure everything
holds in place. These are disposable mats that will lose adhesion over time, especially if you don't
store them properly when not in use. Since I am using another one of their provided materials,
it loads their proper presets. To use the cutter, you'll need vector images, since we won't be
engraving with the cutter. I make a quick vector stencil version of my logo, and get to cutting.
And yes, it did cut the shape perfectly, but I do have to note it was quite difficult to get off.
I had to be extra careful when removing this vinyl, but it did eventually all get off in
one piece, and I stick it to the front of the X-Tool. I actually think this looks really good.
I then went ahead and played around with adding the text 3D Print General to cut in vinyl,
and ran into some issues that I'm sure anyone experienced with vinyl would know not to do
already. Since I didn't use any guides or proper transfer methods, these letters definitely didn't
come out straight when placing them onto the X-Tool, so I end up just removing them. But if
you've worked with vinyl before, unlike myself, then you already know how to transfer vinyl cutouts
properly. To also note, the cutting is pretty much silent, which surprised me a decent amount.
Getting back to laser engraving, I then ran into the only other issue I had during this review,
and that was engraving onto their provided rock coaster. I'd become spoiled with the insane detail
I got in the metal dog tag, so I attempted to do a really detailed image of my cat requested to me
by my fiance. And, well, it seems that this material isn't the best for high detail. I assume this is
due to the rock coaster and not the engraver, since we've already proved that high detail is
more than possible. For the other provided rock coaster, I just went ahead with more of a simple
graphic without high detail, and it came out great. On the topic of coasters, I also did a simple
graphic onto the provided wood coaster, and once again, zero complaints on my end. The last
engraving I did on this machine for this review before getting into more unique materials was to
cut out a part that you put together made out of wood. I went with this cat's laser cut design by
Wolfpaw98 on Thingiverse. This is just to show off you can do some really cool projects made out of
wood, and I just went with this really basic model. This all cuts out perfectly, and I slid the pieces
of wood together and made the wooden cat you see on the screen. The possibilities are endless when
it comes to awesome wood cut models you can create. Now on to more unique items, starting
with trying to see how this does on 3D printed parts. This is when it requires some creativity
and trial and error on myself, since there's no presets. The very first thing I do is try to
engrave onto a resin 3D printed watch dial for a video that I've been working on, and unfortunately
no matter how high I set the power, it just wouldn't engrave properly. I mean when I made a
vector image and attempted to score it, it did leave a bit of a cutout, but it was extremely
hard to see. Engraving didn't really work at all without burning it. This perhaps would look better
on different colored resin prints, but no dice on my initial test when it comes to white resin prints.
Next up I wanted to play around with FDM prints. Since parts have to be pretty thin in order to use
the engraver, they include risers and the ability to remove the bottom plate from the base of the
printer. This allows you to raise the X tool as high as you need to engrave your part. I do just
this and try to engrave on some prints. It looks like they also have a pre-order for a riser base
with a honeycomb panel, which looks interesting if you plan on consistently engraving thicker parts.
I only end up doing two 3D print test engraves for this video, first up being this lower in
blue Polymax PLA, where I engraved the deterrence dispense logo onto it. Took a couple of passes of
slowly increasing the power to get it right, but overall not too shabby. Not perfect, but I'm sure
it can be improved upon with further testing. I then decided to add a serial number to a frame
that was a failed print due to how ugly it came out, and it's a little hard to get a good picture
of it, but it was able to make the serial number, which is less than an inch long. Each individual
letter is only three millimeters in width, and I was able to get both an engrave and a score with
it coming out legible. Now it's time to use that awesome rotary tool. This rotary tool allows you
to engrave onto cylindrical items. You can use either the rollers for an item that fits within
its boundaries and you can level it out, or you can use the chuck, which will allow you to grip
items that won't roll properly. You can even grip something as small as a ring with the chuck.
In this video, I don't use the chuck, but as mentioned elsewhere, it's difficult to test
everything for an initial video and keep it at a reasonable length, so I'll certainly be using this
machine more in the future. For this, I go ahead and grab a tumbler we have and get to engraving my
logo onto it. To do this, we just need to make sure we raise the engraver to the proper height,
set up the rotary tool to the proper size and make sure it's level, then place it inside the machine
and make sure the wiring is connected to the back of the engraver. Once in, the auto measure worked
perfectly to determine how far the tumbler is from the laser for proper focusing and strength.
If you ever have issues with the figuring out the distance, you can manually measure it,
but I found a trick in my test that if you put a small amount of blue painter's tape or masking
tape onto your object right where the laser is judging the distance, it will help to figure it
out without needing to manually measure. Some transparent or black textures can give the auto
measure a difficulty, but a small amount of opaque light tape will help. You can then remove the tape
and get to engraving. It does seem I might have gone a bit too high on the power for this engraving,
but regardless, it looks like it worked perfectly. I also could have been a bit smarter with my
placement on the tumbler, but this is just my initial test to prove it all works as it should.
The framing feature does show you exactly how it will engrave even with the rotary tool.
Cylindrical items are no issues when using this rotary tool and the X-Tool M1. Before finishing
up, I also decided to engrave some bonus parts, including this metal magazine and this metal base
plate. I did actually engrave on the wrong side of the base plate, but oh well. This thing is
going to really open up some fun possibilities and projects that won't limit me to just 3D printing.
This magazine I went with the same design as my business card, and while it certainly worked,
it looks like I went a bit too powerful on the engraver, since some of the parts of my logo may
have engraved a bit too deep. But you can see the lines came out perfectly. It's really cool to see
the possibilities that this unlocks. Alright, I'm not going to give my normal pros and cons
because of my lack of experience with other laser engravers, but I will give some final notes.
This is extremely user friendly, and for a laser engraving noob like myself, it was all a breeze.
I am sure that there are endless projects you can have fun with when using this engraver cutter
combo. I didn't do enough tests with the cutter, so I need some more projects over the coming
months. This engraver now permanently sits on my secondary workbench, and I have no real need to
have another machine because this one seems to do it all. The only real negatives that I
experienced was with the camera and AI detection having difficulty picking up dark black parts.
Another minor negative I had was that the software would sometimes underestimate the time required.
Most of the time it was spot on, but a few times, such as with the cat cutout,
it said it would only take 4 minutes, but ended up taking closer to a half hour.
The unit I received is certainly pricey, but the baseline product has nearly all of the
capabilities just with a smaller laser. You obviously don't get the secondary filtration
unit, the rotary tool, or the premium material package either, but it's much more reasonably
priced. I can assume that if you have a project that you want to sell on Etsy, you can make your
money back in no time, and this would be a perfect addition to your creations. The AI
batch feature and autofocus will likely save you hours of time if you plan on using this unit to
mass produce items. Please forgive me if you saw I did something stupid during this review,
and leave a comment if you did see that, so that other people new to laser engraving and cutting
can know about it before they get their unit. Remember that this unit can do a lot, and I
barely got into the basics in this video, so make sure you subscribe to watch me use it more in the
future. Thank you all for watching. I'll be back soon with more reviews, tutorials, and fun prints,
and now, fun engravings and cuttings. Before you leave, I wanted to show off the brand new
version of my book, 3D Printing Failures 2022 Edition. It has been two years since I updated
this book, and this time, not only have I made sure all of the chapters are relevant to today's
market, I also made sure the paperback version has full color photos. This should really help
since the photo quality was the number one complaint from my past editions. I made it so
that the first 120 pages or so are meant to be read in order, so that you can get a full grasp
of 3D printing, especially if you're new to the hobby, and then I have a diagnosing failure section.
The goal is for you to compare my photos to the issues you're having, and then direct you to the
chapter that will help you fix your issue. Best of all, Amazon, for some strange reason, has decided
to mark off the price of my book by $11. I cannot promise this will last forever,
since Amazon couldn't tell me why they're doing it, but this longer, full-color book forced me
to charge $35, so Amazon listing it at only $24 is a great deal. Grab it now while you can,
all links will be in the description down below.