In this earthly journey, we have met an artist, scientist, blacksmith, carpenter. An out of the ordinary for these times, hidden in his workshop in Bragado, Province of Buenos Aires. But... before talking about him, we need to go back to the beginning, to the origins of the forge.
Forging dates back to prehistoric times, 2,500,000 years BC. It is the stage that goes from the origin of man to the discovery of writing. Forging has its origin, specifically, in one of the stages of Prehistory, the Age of Metals.
We do not need to delve any further into the history of man, since Manuel preserves it in his hands, in his spirit. We witness the genuine creation of tools and utensils, as basic as necessary for human subsistence.
He uses the 5 elements in his medieval laboratory.
Watching the creation of a tool, a piece that will later be used for who knows what, is the origin. The origin of things is the simplest and least striking, but the most important. The only thing that remains in history and in time is the origin, the creation, that which will never be erased. Thank you Manuel
Manuel Pagani, científico de la creación, forja herramienta para tornear cuenco de madera. 🍗///🍰///🍷/// Suscribite Contacto: [email protected]
En este viaje terrenal, nos hemos encontrado con un artista, científico, herrero, carpintero. Un fuera de serie para estas épocas, escondido en su taller en Bragado, Provincia de Buenos Aires. Pero… antes de hablar de el, necesitamos ir al principio, a los orígenes de la forja.
La forja se data en la Prehistoria, 2.500.000 años a.C. Es la etapa que va desde el origen del hombre hasta el descubrimiento de la escritura. La forja tiene su origen, concretamente, en una de las etapas de la Prehistoria, la Edad de los metales.
No necesitamos ahondar más sobre la historia del hombre, ya que Manuel la conserva en sus manos, en su espíritu. Presenciamos la creación genuina de herramientas y utensilios, tan básicos como necesarios para la subsistencia humana.
Usa los 5 elementos en su laboratorio medieval.
Ver crear una herramienta, una pieza que luego se utilizará vaya a saber para qué, es el origen. El origen de las cosas es lo más simple y menos llamativo, pero lo más importante. Lo único que queda en la historia y en el tiempo es el origen, la creación, lo que nunca se borrará. Gracias Manuel
This is a spring for cushioning.
I'm going to recycle a piece of spring like this,
which I have already stretched previously.
It is a steel that is tempered and that is good for making tools of this type.
It is a very old tool.
It is used to turn bowls.
That, by force of blow and heat, we are helping the shape.
And it is the origin, let's say, it is where the work of the lathe actually begins.
To have a edge to be able to cut.
Now I'm making a tip, a spike, which is where it is going to be nailed in the end.
And now, in this heating, I'm going to start stretching to make the part of the edge of the tool.
We let it cool a little bit to be able to manipulate it.
I'm going to do this with a thread on both sides,
so that when it ends on one side, when it sharpens on one side, I use it on the other.
And here I'm going to bend it as if it were a hook.
And that's going to be the tool.
So now I have to grind and generate two threads, one on each side,
and then bend a little more.
And the tool is ready.
Then you have to sharpen it and we are going to turn.
Now I'm going to bend the hook and it's ready to sharpen.
And now I'm going to temper it to give it hardness,
so that it retains the edge.
When the file slips, it means that it is hard.
Because as the file is hard ...
Well, now I'm going to remove some hardness so that it is not so hard.
I'm going to heat it up again.
It is like a reddish, a violet and a blue.
That is always noticeable in steel when it is heated.
And that is a temperature indicator and is used to give it what is called a return,
which is the final hardness of the tool.
It is not as hard as freshly tempered.
The bronze that is seen.
Already when it is blue or when it is almost gray, it has completely lost hardness.
According to hardness, it is the color that ...
Normally for cutting tools I use that color as bronze.
The idea is that this has to be like a razor.
Now we are going to prepare the wood.
Ideally, the more straight and perfect is the beetle, the better.
But hey, now I have this, it's a beetle.
Which is a tree that I collected, let's say, from a prune.
What I always do is avoid ...
When I prune a piece, I always cut through the center, which would be the core.
I try to leave it out or cut through there.
Because from there, where they always crack ...
If you start to see any piece or any trunk, the cracks always go to the center.
And when you cut there, the tension is released.
And here, from this little piece, a little hole is going to come out.
A point, just, where the wood ends well and it is easy to turn.
You can also turn dry wood.
But hey, it takes a little more effort and also suffers more from the edge of the tool.
So you have to sharpen more times, but ...
Actually, taking the balance, I prefer the more parked wood.
Simply the use, after these objects, is polishing and giving them the finish.
Now I have to carve those little parts.
They are all tools that I have been doing for a long time.
Now I have to let it dry.
Somewhere that does not give it the sun, that does not run the air.
And then it is ready to pass the oil, to sand it in any case, or give it a polish.
Normally, this is generally used to make larger hollows, like salads.
Now I'm going to show you, but ...
But hey, this is basically the process from beginning to end.