Hey, what's up?
My name's Cameron Ammons.
Thanks so much for joining me today.
If you're new, this video right now
is part of a tillering course I built out last year,
and this year I wanted to post it for everybody to see.
Now, this specific video is a long one,
so buckle up or save it
or do whatever you need to do to come back,
but I'm gonna cover the entire process of tillering a D bow.
If you don't know what a D bow is,
it's just the style of bow that looks like a D, basically.
So I'll talk about it more in the course.
I hope you enjoy this video.
Thanks for joining me.
See you around.
Welcome to the D bow tillering case study section.
Now I'm feeling a little spunky today,
so I'm pretty excited to get after this,
but I've already showed you
pretty much everything you need to know
in order to make a good bow,
except I'm sure there's things I missed.
So as I go through the process
of me tillering this entire bow,
maybe you can catch onto a few things
that I maybe left out beforehand.
And if not, hopefully this shows you kind of the time frame and how I like to work on it
And so you'll be able to see it rather than me. Just talk about it. Here are our goals for today's bow build
We've got a 40 pound bow. We're gonna build out a 28 inch draw 1 8 inch positive tiller
Roughly around there is what we're going for and we're gonna do a smooth shooting bow. This bow today is a 68 inches long
It's got wide limbs. It's an Osage orange
Bamboo backed bow with maple and Ipe on the handle just throwing different woods together that I have here in the shop
We're gonna tell her using the tillering tree
so that's gonna be the difference between this one and the reflex deflex case study is I will be using the tillering tree and
The shape of the bow will look different in this one
Also, I'm gonna take access and use the tillering gizmo because this is where it shines
Let's jump into building this bow
So I've already prepped this bow meaning it's starting to floor tiller and I've already got the string grooves
Filed in the wood. I used is not dimensional lumber. I milled it myself. And so it's not straight. But with that being said
Near the handle here. It's actually the thinnest right now
So I'm gonna have to even that out and pay attention to that straight off the bat
There's three things that are gonna aid us in a smooth shooting bow today
One is the wider limbs two is the length of the bow because the bows longer and the limbs are wider
It allows you to distribute the stress more evenly making it smoother shooting in general
Also, I did a 12-inch handle section instead of an 8-inch the more weight in the handle the smoother shooting
The bow is generally because it can absorb the vibration with a heavier handle
So those three things are gonna aid us and the smooth shooting bow as far as for tillering goes
It is already bending
So I'm gonna put a tillering string on it put it on our tillering stick and use the gizmo to start marking where to remove
Wood the tillering gizmo has a nut here
Which allows you to screw the pencil up and down and so it's barely gonna be
Sticking beyond the wood in the beginning and the more the bend bows the more we'll need to screw it in in
Order to mark and remove wood the one thing when using the gizmo you want to keep in mind
Don't change the distance from limb to limb. Don't screw this in more
After you do the left limb to the right limb if it's not touching on the right limb
But it is the left then only remove wood on the left limb
Don't screw it in more so that it will touch because that will make the limbs uneven
One of the things I have not done yet on this bow is see if the width is even on this limb to the other limb
So I'm gonna check that real quick because that's first before you start tillering and I just rough this out with a bandsaw
And so I'm not sure if it's if it's correct yet, so I'll go every two inches
They'll go every three inches from the handle. So three six nine
twelve
fifteen eighteen
twenty-one
Twenty-four will mark out every three inches from the handle and then I'll measure this either with a tape measure or calipers the width
And I'll write that on a piece of paper or the whiteboard
And I'll do the same thing on the other limb and then we'll compare to see if the width is the same
We'll get the width even first and then we can start checking the thickness
Okay, so these marks are the inches this is the left limb this is the right limb
This is in the thousandths of an inch where we are at going from three inches from the handle
Six inches from the handle nine inches and so on and so we can see how far off we are on the width of each
Limb, I would say a good tolerance is 30 thousandths of an inch. So at the very end, we're good
Here we're actually good there at the end as well. And then we need to remove wood there
We need to remove wood
So that's where we need to remove wood is on all of these. Well, technically it'll be this side
So this limb we need to remove wood
To match this so these numbers will stay the same
We'll get within 30 thousandths of an inch on this left side and then our width will be close enough
What happens if you don't do this or do this with a tape measure if you don't check to see if your limb width is
Right on both sides one end is gonna be much thinner than the end when you're tillering and it's gonna mess with your eyes
and and
It's just not ideal
So first, let's get the width even and then we can work on the thickness
and if you're curious of how wide your bow should be I do have a video on that but
Basically go wider for the softer material or wider for a smoother shooting bow
And if your material can handle it go as narrow as you want for a faster shooting bow. Okay, I like where we're at
So we're gonna start tillering. I've got the tillering tree right here
Now you could screw this into a wall or a workbench
You could put it in your vise or whatever you would like to do here
I just put it in this vise over here that way I can go back and forth quickly between my two vices
First thing is to make sure your bow sets fairly level now
We're not measuring it off of anything because it's away from the wall. That's okay
We can just eyeball it and that's I'm gonna do today is to eyeball it that it is not twisted this way
And then it's not
Seesawed this way and that will depend on the squareness of your handle the squareness of your tillering tree
So if you need to add wedges or anything in there go for it. Just make it look even
Okay, so we're gonna measure the center of the handle since it's
So that we can line up the middle here with the middle of the handle. So 12 and 3 quarters
Six and three eighths, I believe that right and
Then I can line my sharpie lines up right there every time until we get a string on it
So our bow is a little bit twisted
side to side
So it's kind of twisted like that. So we need to level it out. So I'm gonna add just a little piece of tape there
To level it out
Okay, we'll check see if that makes a difference
sweet
Okay, we're looking good
Looking good
Okay, got the tillering string on and we can just start pulling it
See if it does pull which it does because it is already pretty much floor tiller
So I was doing that by feel right there, but you don't want to pull it past your desired poundage
So in my sake it's 45 pounds
I'm just gonna use this small scale to see where we're at
So I can pull it I can look at it like that. And now I know my 20 inch mark
I shouldn't go beyond that for now
So I'll pull it put it in that 20 inch mark and then use the gizmo to mark where we should remove wood
So the awesome thing about the gizmo is it shows you exactly where you should remove wood for a D bow
So here the pencil starts here
so I'll mark that with a sharpie and then the pencil ends here and then we've got another pencil mark there and there and
Then there's some up closer to the handle
So now I know in between here I need to remove wood
I'll mark the level. I'll mark the lines even
And I'll mark the lines even I didn't show you this
But you will want to check
The thickness of either side of the limb and if the thickness of either side of the limb like we covered earlier on limb twist
It's good to go. Then you can start removing wood evenly off of where your marks are
So I'm gonna do that now
So I'm gonna go ahead and remove this wood now
And I'm gonna do this probably four or five times before we get a bowstring on it since we are already bending a decent amount
So let's jump right into it
One quick thing if your gizmos touching the entire limb if the pencils marking the entire limb on both sides
That means it's too far in you want it to just hit little parts of the limb the ones that are
Aren't bending as much so back it out if you're getting readings of the pencil covering the entire limb on both sides
It's also important if you have an area like this just to remove wood where the sharpie is. Don't go here here
Just like that
All right. I got another tillering tree tip for you
So you don't want to pull it past 45 pounds or you don't want to pull it past your desired finish poundage
Whatever that whatever you choose that to be whether it be 20 pounds or 60 pounds
But I don't like to let it rest at that pounded easier either. So if I'm going for 45 pounds
I'll pull it. I'll exercise it to 45 pounds, but
I'm going to let it sit in the tree about 2 to 3 inches less
So that's gonna be about 40 pounds of 5 to 10 pounds less is where I'm marking it if that makes sense
So I'll exercise it to my 45 pounds
But because the stress is continuous when it's pushed into the tillering tree, it's still bending it's under stress right now
I don't want to leave it under stress at that 45 pounds
I'll leave it under stress at about 40 pounds and then I'll use the gizmo there and that tends to keep it fairly safe and
The results are great that way rather than putting under so much stress and leaving it under that stress
That's how we're looking right now if you look carefully you can see that it's bending too much
It's it's too thin right near the handle there
Primarily on this side, maybe a little bit there
And that's a reason to not leave it down at its full
Poundage is because that could create a hinge if you have a spot like that
I've removed zero wood off of this area
Since the belt sander and I hit it with the bandsaw and then a little bit with the belt sander before I started filming this
Video and I realized ooh, that's that's a little thin right there compared to the rest of the bow
So we're gonna be real careful there. And actually I'm gonna do a little
Little trick I like to do when I'm really trying to not ruin a bow
So if this bow were to break it's gonna break right at the handle. So I grab some duct tape
And I place the tape
Right where I could see that hinge might start creating now
I can't I can't remove wood there without removing the tape and so I won't exit like I might scrape wood right here
But now I can't accidentally scrape too far. It's easy to feather it out and remove wood where you don't want to
I really like this method
To keep from creating a hinge as I continue to remove wood as the gizmo tells me to down this way
It's going to even out with this area near the handle
So I'm not exactly sure how far that's bending. We're probably bending. Okay, we're at 11 inches there
And that's 15
And about 17 we're getting close we got a few more
Few more times to go back and forth before
We put a real string on it
All righty. So the last time we use the tillering gizmo the last time it was up here on this tillering stick
We came back to remove wood and we only had one tiny area of pencil marked removed wood there
So this next time it's time to screw the pencil further through the gizmo
but for best results with the gizmo don't
Push that pencil through too early like you can see now how small that pencils going through so I'm gonna twist it up
Another half turn and now we're gonna try it again there
But the reason you want to take it slow like that is because if it's screwed in too far
It'll just mark everything not giving you the most accurate reading the less wood the pencils marking the more accurate
Reading you're getting and the better your tiller will be
So there you go now now now unless your tiller is already good if your tiller is like perfect
Then it's gonna be marking the full thing. So if you're marking the full bow the tiller is perfect or
You have the pencil way too far through but you can see with your eyes if the tiller is perfect and you'll know you'll know
when that happens
All right, so far we've been tillering for two and a half hours and I'm just as pumped up check this out
This is a cool little tip
This is actually one of the things I like to do with the tillering stick
Even if I'm using the tillering tree
I'll come over to the tillering stick to do this part way through because it's really good
Visually to see where you're at. So I'm gonna pull it near my finished poundage probably 40 pounds
Which is for me at my 18 inch mark. It's a loose string. So clearly I'm not pulling 18 inches, but let's pull it down
Okay
So we're stressed at about 40 pounds. I'm gonna grab a string and
You can hold it across from knock to knock and you can see where you'd be at when you string your bow up
So right here I can see I'm at that mark
So we're about at
Boom, we're right at we're right at six inches. I don't want to leave it stressed too long
15 seconds is plenty, but I know at 40 pounds. I'm at that six inches
So I want to continue to pull down and remove wood until when I hold the string up
I'm at 10 inches and when I'm at 10 inches, then I can string it up to brace height
Which brace height is gonna be about 7 inches, but both strings stretch
So if you've ever noticed when you string your bow, you have to string it
You have to bend the bow beyond brace height to get it there and it's about 10 inches maximum
So that's gonna give me that extra play of safety to pull it to the 10 inch mark
And then I'll put the string on it and then we'll really be rolling
But at least half the process is to get that string on after it's strung it moves real real quick
I've also got the bow bending again here and on this limb. I believe it's bending
More even now. I think I'm comfortable enough to take the tape off
So there's still a slight slight bend right there a little bit more
But I'm gonna take that tape off because I feel pretty comfortable from there
I'm gonna continue to be careful and even it out. Yeah, I think that's gonna work
I hope this is the great thing about bow making it's like I
Don't know sports related. It's like you you get a chance for the game-winning shot and you work this whole time for it
So it builds the the tension
I guess you're building tension in the bow
you're also building this emotional tension of like will this work and then when you
Finally get to shoot the bow and it works and then it lasts you a lifetime
like that bow is just so much more enjoyable and so much more treasured for me than
Random bow you get I always like to recommend a wide long bow like this for your first one
The reason is is because you can get a really good feel for bow making with lower consequences
Your chance of success is greater with a bigger bow like this and you end with a smooth fun shooting bow
But when you remove wood if the limb was three-quarters that length
The wood you remove is going to make a bigger difference
but here the wood I remove makes a smaller difference because there's more wood and
Total in play and so even from the reflex deflects bow. I tillered recently
This bow is just six inches longer. So three inches longer on each side, but there's a big difference
Especially because it's wider. There's a big difference on how much wood I need to remove in order to
Have the wood bend so that allows for smaller changes easier and
Better bow in the end. All right to give you accurate numbers
This bow is pulling eight inches down and I just strung it
So I didn't go all the way to the 10-inch
but getting a string on it as soon as possible is a good thing because it changes the
Angle at which the limb tips will bend because instead of a tillering string bending that way
It's pulling more in with a bow string
the next thing is you can eye down the bow and see which side of the bow the string is laying on and
In this case, it's laying on this side
Just slightly not much but just slightly off and then I can establish my top limb because the side the string is laying on
It's laying a little bit more to this side. I want to cut my arrow rest into this side that way
It's closer to center shot. So the string is running directly in line with the arrow as much as we can
Let's throw it up here. Let's see how much it pulls at 40 pounds
Actually before I do that, I need to finish laying out the handle. All right, so my layout
is
I'll take the center
and I'll come up from the center an inch and a quarter right there and
That's going to be
My arrow rest
It'll in the end be curved like that and then this whole side
Will be chunked out
But from there, I know
Directly across from my arrow rest. I'm going to draw the bow with three under
instead of split finger
So I'm gonna be pulling the bow right there when I shoot
so what I like to do is
grab some tape and
Mark
Approximately
where my middle finger will go and now I can put this in the middle of the tillering board and
That'll allow me to pull it more accurately than in the very center
Okay, so you'll see I've got the arrow rest of there. So right under the arrow rest is where
my handle go
Which in this case since I'm shooting three under it's gonna be pretty center to pretty close to directly in the center
But I'm gonna just need a little bit slightly over
Right there. So here's the deal. I've got the string on
I haven't removed any wood off of it yet
but the reason you want to get the string on as soon as you can without over stressing the bow is
Because it helps you see the correct form of the bow the correct shape. So I'm gonna check the poundage
25 pounds at 13 inches
30 pounds at 15
35 pounds at 17 inches
So we're like at 40 pounds at 19 inches. So that's gonna be like 45 at 20 or 21
I didn't pull it all the way that time. I want to check the tiller first
So what this means is I'm bending the bow on the tillering
Tree to just getting the limbs to bend to 8 inches and that 8 inches at 40 pounds relates to a strong bow
Bending
21 inches same poundage why the reason why is because
The limbs the distance the limbs bend isn't the distance the strings at because the limbs up bending
Let's say 6 inches, but the string comes at an angle, right? And so the string is gonna be much further
And that's why when I was tillering and I was like man, these are the limbs are bending 8 inches none of my mind
I was like, oh, I need to go ahead and put a string. It felt like intuitively
I need to put a string on it. So I did and
That's good. So go go 8 inches with the limbs bending
I think that's a good spot and then put a string on it and then from there you can continue tillering
And now we can remove wood you can actually remove wood without taking the string off it by turning the scraper
So I need to remove wood here, but the scraper won't fit
So if you turn the scraper this way, you can catch the angle still pretty good
And still remove wood that sides I think dull
There it is
Before we continue. I want to shorten the string now. I like to string it with this
leg through method
The only reason is because it's what I've always done
The safer way would be a bow stringer, but do whatever you want. I'm just shortening it a little bit
So our brace that will be higher
The key here with this method is that
You put your leg on the handle and then do your best to bend both and limbs evenly
It didn't change a whole lot
But we'll continue tillering and this is one of the reasons you don't want to do the leg through method
Because my tip overlay snapped off
Now that we've got a string on it
This opens up the opportunity for you to pull the bow to exercise the limbs
It's a really fast way and a fun way to exercise the limbs
The idea is just to know how far to pull it. So with a tape measure I
can say
25 inches is my shoulder
17 is the inside of my elbow. What does that call? I can go 17 there and I'll just kind of intuitively feel it
So now we continue to do what we were doing putting it on the tillering stick
And then coming to removing wood and continue that until for me
I'm gonna stop at 22 or 23 inches of draw at a 45 pound draw weight
So I took some time to re-glue the tip overlay on
So that it would be safe because when the bow gets pulled down this could have slid over the top and released
So we got the tip overlay on and then I cut the groove just a little bit deeper on the back side
That way we're safe. So I'm gonna get back to tillering
All right, so we're getting really close
Just gonna exercise the limbs a bit here. It's good to start being more careful and removing less wood
So now I'm gonna move away from the sharpie
So with the sharpie it tends to take me 10 to 15 strokes to remove the sharpie lines now
Basically, I just want to go down to about five strokes so you can just follow the pencil lines
But I'll just count five strokes and that'll be good so that we don't adjust too much too quickly
So we're at 45 pounds at 24 inches
And so it's really time to do very small incremental changes to the bow so that we don't mess anything up
But we're getting super close
I'll keep tillering here for about three more inches two or three more inches and then we'll shape the handle
As you go check the tiller so find the deepest part of the limb
7 and 13 sixteenths on the top 7 and 13 sixteenths on the bottom
So I am wanting a positive tiller
So I want the top one to bend slightly more about an eighth of an inch to a quarter of inch somewhere in there
So at this point
I'm gonna continue to remove a little bit more off the top one than the bottom limb so we can end up with that positive
tiller
All righty, we're three inches three inches away from being done
But because of that I'm gonna pause now
I'm gonna shape the handle to how I like it because in final sanding and shooting and any minor tweaking
I need to do those three inches will disappear, and we'll have a finished bow, but like
We're super super close
so we're basically there and
I'm gonna shape the handle now, so let's jump into shaping the handle and
We're gonna have a good bow this bows tillering and looking
Really good. I was able to accomplish the positive tiller
so
7 and 7 8 and
7 and 5 8 so we've got our positive tiller going that's good
We've got the bin looking super good
That's a thumbs up by the end if you're still using the gizmo
The idea is that the whole bow would be marked or basically none of the bow would be marked. We use the gizmo to mark
that that means it's gonna be an even bend so
Feeling really good. I'm gonna take the string off shape the handle and I'll get back to you
We're in business
Check it
The handle shape to a comfortable stage
I like to just get some arrows through it first to make sure I like it and then I'll finish shaping the handle in a bit
but
first shot
Is always nerve-wracking
Kind of short drop that I think it might be a little heavy still
So right now we've got actually
It's not there's quite a bit of vibration in the handle, so
I'm gonna pick up the tillering and do a little bit more tomorrow. It's 5 p.m.
I've been at this since 7 a.m.
Normally won't take you that long. I did some other work and I
and I've been filming and such but
I'm gonna give it a break for now
And we'll get back to tillering
Tomorrow, what's up team shadow proof? It's a good day to get back after it. I got the bow right here
Just kind of resting. I
Need to figure out why that didn't shoot so good. So there's a couple things going through my mind
As I let a day pass the first thing is
I think I might have it just a little too heavy on the poundage still
I'm not sure but I need to check again to see where we're at there
and then I just need to check the tiller as the second thing and then
The third thing I thought of that could have caused this is if I did not line up the handle
correctly where my
My hand was gonna rest on it that would change the tiller when I shoot it
So now I got it back up here in the tillering stick with it directly where my hand rest on that handle
So I could have missed that line up or something
So we're gonna just start checking some random different things
To see if we can figure out where we need to remove wood in order to get this to shooting a little smoother
I mean pounds at 20 inches
Yeah, so I think we're closer to uh, I didn't pull it all the way to 28, but I got it close
At 24 we're hitting like 45 there
So it's generally three pounds more of draw weight for each inch of draw when you're getting to the end
Normally give or take so five four more inches. That's three six nine twelve
twelve fifty
So we're in the 50s 57 or something
So I did stop a little early earlier than I wanted to at least
Not that it couldn't be a good bow there
But I'm gonna check the tiller now
And knowing it is a little heavy the heavier bow in general is just gonna have more vibration the heavier poundage bow
so
An 80 pound bow is gonna have a lot more vibration than a 20 pound bow just because of the nature of it
So that could be a little bit of that vibration
Check this
So it's pretty stinking even if anything, it's just a little bit here on the upper limb tip
Let's check the the tiller to see if we still have a good positive tiller. Yeah, we're still good on the tiller
Okay
So far, I don't see anything that I need to do except
Continue to remove wood in the same area that I have been basically everything's looking good. So I'm gonna take off about
five ish pounds
of material so that might be three or four revolutions and then
Then we'll shoot it again, we'll see how it goes. This is a interesting case because normally when it maybe I need to shoot it
again now because
I'm gonna do some wood first because it's over poundage, but
Yesterday I was getting quite tired at the end of the day
And and maybe it maybe I just thought there's more vibration than there was cause I was tired
I don't know but normally if the vibration is off
The tiller is off. So normally if you're feeling the handshake really really bad, which I thought I was getting yesterday
Normally the tiller rings off. Normally something is off
and I've been able to
Go back and double check everything exercise the limbs more or something and then and then recorrect it and have a great result
We'll see if we can get this one to that good of a result
Since I just want to reduce poundage and I have a decent amount to reduce I am
putting the Sharpie line back on for the entire limb and
Because I want to remove wood evenly and I just take that Sharpie line off and I'll go test it
So that's what I'm doing here to get an even amount removed
which is for me five to ten strokes will remove that Sharpie line and
That's how I'm going to remove what is even as possible
Continuing to check the tiller as we go to make sure I don't mess something up
Okay, so I've got a couple of thoughts here I don't think I have enough of the handle working
Okay at the risk of being confusing. I absolutely have to cover this which is
Stack and so stacking is where this angle
is so sharp it stops to bend and when it stops to bend it's pulling and
In the bow your world we call it stacking
it's quite funny because
My very first not not my first but like one of my first 10 YouTube videos was about stacking and
I'm a I may actually link that here below if you want that a little bit more in-depth on stacking
But basically that could be causing the uncomfortable shooting but check this out from here
here
There is very very little bend near the handle which you don't want a lot of bend near the handle
You kind of want it to
Gradually fade into the limb, but there's not enough and because there's not enough here
There's so much action on the outside causing this to be in
The limbs to be in so far that it's starting to stack
Therefore causing it to be uncomfortable in other words
I need there to be a little bit more action right here and right here and that should make it much more comfortable
I believe that is the problem
So with that being said I'm gonna start removing wood closer to the handle slowly this is dangerous in reality
I was hoping that this would turn out super easy super quick easy tiller
But this is this maybe can help some people because it's a problem-solving process to build a bow
It's not like do this and this and you're done and it's good
Every bow is different and you've got to look at it and figure out what's going on in order to solve the problem
So that's what we're doing now
I'm gonna try to solve this problem of stacking and that's exactly why when I'm getting closer and closer to full draw that poundage is
shooting way up is because the limb stopped to bend and it starts to stack and push and I
Don't know how to say it
But it almost feels like you're hitting a wall when you're drawing the bow and I do have a long bow
But I had a massive massive handle section and as well as that really really really slow fade outs
So that's causing me to have let's measure it
I have about 25 inches of no action basically if I go from there
24 inches of no action and so we're gonna get a little bit of action there because our handle
Is only 12 inches which means I got about 6 inches on either side before you can start seeing it actively bend down
Therefore, I think we're gonna get a good shooting bow, but we're gonna need to do a little bit more work
We'll draw it 22 inches. Okay, the gizmo
Won't mark right there because we're going up on the riser if you grab your scraper
You can see the gap change and where the gap is. The smallest is where you want to remove wood
And you can mark it
so any straight edge
Especially one that's smaller
so you might want to go from a 6 inch to a 4 inch and
That allows you to get closer to the handle to see if it's bending
I would still say the first two inches after you don't really want that to bend but it's a fade out. It's a gradual
Again, it's one of the biggest problems. I see is people having it break right near the handle
So you do want it to fade into the limb, but you don't want it 24 inches of non bending in this scenario
It would work to decent if I would have had a reflex limb, but without the reflex limb
That's where we're starting to run into that stacking. So
Let's do this other side and you can substitute a scraper for
a
Gizmo you could just use a scraper if you want or of course you could do this all by eye
And that's how I saw this problem
Is I'll step in back and I was like that that's not bending near the handle
I saw it with the eye and then I started doing some other checks. I'm like, ooh
Maybe we're running into stacking. So
Let's get this done
Okay, we've got more bend in the handle since we're making slight adjustments
Let's go ahead and shoot it. See if we can feel a difference because I believe I've got this to full drawn. It's feeling pretty good
All right. Well definitely feels more comfortable to draw
all the way back
Now that's closer to my finished poundage
And so we'll test the finished poundage after we after we shoot it when we're done. See how close we made it to our goal
Okay, I hope this feels better a
Little bit better it's let me shoot another one
Now remember the goal of tailoring is to get the bow to shoot it how you like it, too
So this could be like how someone else likes it, too
But it might not be how I like it, too
So someone else might call it done. I need to take another shot though to get to see how this feels
Yeah, it's it's feeling like the limbs are off
Slightly I would say I took away 30% of what I felt earlier from what I remember yesterday
The other really good thing about shooting it is I find that it helps the bow
know know what it's supposed to do and
The tiller changes slightly sometimes maybe it was a lack of exercising the limbs or something
But sometimes after shooting it five times
I'll go back and I'll check the tiller and I'll be like, oh there the problem is so hopefully that's what happens today
That's not that bad I'm getting excited because it's it's not feeling too bad
All right, I'm gonna do some checks real quick and see if I need to do anything else
So there were a few spots I found
throughout the limb
That appeared to need some wood removed to make it more even
Did it real lightly?
So let's take another shot. See how it goes. I
Might be it that felt pretty good
I think we did it tillerings kind of subjective because the methods
there's so many different ones and then also and the end result could be called good by one person and not for another and
That's why I like to say make the bow you like
Mess with it
You see how I kind of had to play with this one kind of had to step back and look at it and realize I just
Need this bending
Slightly just slightly and I need to bring the poundage down a little bit and then now it's shooting in a way that I like
It it feels really good. Now when you probably saw that first time I shot it last night. I was just like
Confused like what?
What?
What it shouldn't be doing that
Let's test the poundage on this to see how close we got to our target
Lucky okay, so our goal is a 45 pound bow we hit it our second goal 28 inch draw
We definitely hit it the third goal one eighth inch positive tiller
Let's check
right now, we're at eight and
seven sixteenths
eight and three sixteenths seven sixteenths to three sixteenths
It's close to an eighth inch. And lastly the last goal was a smooth shooting bow and in my opinion we did it
We did it
That's a good lesson as why you want to slow down near the end of the bow so you can make adjustments if you need to
Now I've only sanded this down to
120 grit sandpaper
So if I were good to go even further and further to make it very very smooth
I could lose a pound to two pounds of draw weight, but
That's it guys. Thanks so much for sticking around for this video. If you've got questions, let me know
I'd love to make follow-up videos to go in depth on any specific questions. You may have
this was a
Real life experience tillering. I assumed it would be smoother than it was
But you run into problems and you the goal is to fix them
So hopefully I showed you a lot of the problems you can run into
Because when you hit them you fix them and then ultimately you get a great shooting bow. It was easy
Everybody would do it and if it were easy and one of these rewarding so enjoy your bow building