To everyone who wants to make a bow, I want to help you. So that's why you're here on this video,
I hope, is that you want to make a bow. And I've put together a fairly large playlist here of
over 10 videos where I'm going to help you make a bow. So the playlist is in the description if
you want to hit it. This is the eighth installment, I believe, in this tailoring course I built out
last year, and I'm wanting to offer it to you to enjoy. So have a great time watching this. Have
a better time making a bow, have a better time shooting the bow, and stay positive, stay
shatterproof. Enjoy this video. It's now time to cover what a positive and a negative tiller is so
that you know what you're looking for when you're finishing up your bow. To understand the positive
and the negative tiller, it's first important to understand bow layout. Now, in general, for most
people, you want to lay out your bow so that the pressure point of your hand and the handle is the
center of the bow, which means your arrow rest is going to be above center, an inch and a quarter
to an inch and a half. With that being said, that means if both limbs bend the exact same,
then it'd be ideal that your arrow rest would be in the very center of the bow,
but since it's above the center of the bow, the logical thing to do is to make the top limb bend
just slightly more than the bottom limb, and that's going to make it shoot an arrow better.
Kind of interesting. I have a quick pro tip for you, and that is to make your bow perfectly
balanced. Yeah, as close to balance as you can make it, right where your hand is,
you can see this one's ever so slightly off balance, makes a bow shoot so much better.
And I've never heard anybody talk about this, but I have tested this out, and this is something I'm
doing on the bows we're going to sell, is if you can make the wood equal on either side and have
the center of the bow be where your palm is feeling the pressure, and then also making that
bow balanced makes a world of a difference when you're going to shoot the bow. That's just a
little side tip. As far as traditional archery as a whole goes, tiller is known to be measured
from the deepest part of the limb on either limb, and so you can measure this and find the deepest
part. Now, a positive tiller is where the top limb from here to here is a bigger distance than the
bottom limb from here to here. A negative tiller is where the bottom limb's a further distance.
In general, with the arrow rest being one inch to an inch and a half above the pressure point,
above the throat of the handle where you hold the bow, if that's the case, you want a one-eighth
inch positive tiller or a quarter inch positive tiller, somewhere in there. So let's see what
I've got here on one of my favorite bows. We got seven and seven-eighths, and then on the bottom,
we've got seven and five-eighths. So pretty good, and that's probably why this one shoots so,
so smoothly. With that being said, understanding the positive tiller is the top limb bending more,
and the negative tiller is the bottom limb bending more, you want to check this tiller or check this
measurement throughout building the bow. With that being said, how you tiller the bow is no
different than what we've already covered to create a positive tiller. How you do that is you
just want this limb bending more, but it's going to be even, and that quarter inch right there is
such a small amount, so when you're at full draw, you're normally going to tuck on the tillering tree
or on the tillering board. This top limb is going to bend half an inch to an inch more,
probably not even an inch more, it's probably closer to half an inch more than the bottom limb,
but this sort of fine-tuning is often what I'll do when I'm shooting the bow in that last two
inches of tillering, but I did want to mention what a positive and a negative tiller is before
you get all the way to the end of tillering your bow so that you can have in mind. Oh, I might want
to have the pressure point, the very center, if I measure from both sides of the bow, the very
center is right here where my hand is. Oh, and I also can make that as balanced as possible,
which is going to create a really smooth shooting bow. To recap on most bow layouts,
an eighth inch to a quarter inch is what I shoot for as a positive tiller when the bow is finished.