1⧸2 Acres To Find Out If We Can Make Hay

Home Farm
142 followers
1⧸2 Acres To Find Out If We Can Make Hay
#HomeFarm, #OrganicFarm, #FarmLife, #SustainableLiving, #FreshProduce, #HomeGrown, #EcoFriendly, #FarmToTable, #BackyardFarm, #HealthyLiving, #SmallFarm, #UrbanFarming, #SelfSufficient, #GreenLiving, #FarmFresh
AI Generated·May contain errors
Video Summary
AI GeneratedA family in Western North Carolina navigates the steep learning curve of their first hay harvest. Despite numerous mechanical failures with aging equipment, they successfully mow and ted their field. The process concludes with a technical orientation on operating a hay baler, emphasizing the importance of proper drying and machine maintenance for a successful harvest.
It's our first time making hay.
Hopefully it's happening today. New cylinder on our cutter,
new hydraulic line.
I've been away and Jonah's been having some problems.
Getting it into our tractor. Jonah has fixed the loose bolts.
We've got a window without rain
We've got a small field. I think we can practice
on and we're scheduled to pick up our new used hay baler
Let's see if we can make this happen
Are you sure you know how to disconnect this hydraulic piece?
I think so. Yeah, we'll figure it out. Probably a little rusty.
Yeah, is that all that's stopping us between us and cutting?
Yep, once we get that
But all we can do cut. What about the one blade that's missing?
I don't know. We'll just
I forgot at least it's on the end. Yeah, it's on the end
So it should be okay and it spins fast enough.
It should still cut it Henry
When you're done with the snack come over
to the tractor still wanted to check on Madre
our new mama pig in training and the
Crop garden cover job we did last week,
but the boys are calling they're up at the tractor
Let's see what we got first up. Make sure all weights off the
I draw it. It looks like it should fit. Okay.
Which would be so nice that it just. I think up is off.
Yeah, I turned it off already. Okay. I've tried.
Look. It said you push it in for like five seconds.
Uh-huh. Okay. And then it should come out. Watch this.
Is this the one you want to take off? Yeah.
You traced it? Yeah. Okay, ready? Oh. There you go.
Love showing the boys what's up everyone.
Thank you everyone for watching the web.
Ciao.
Even try it. I like the old the new equipment is much nicer.
Wee!
How did you how long did you struggle on that? Oh?
Oh, an hour?
Probably an hour.
Okay.
That's ready. Oh, we're good
Now listen, you have to cycle it because there's gonna be no hydraulic
in that and there may be all kinds of air bubbles in this
So we may have to do some things. Yeah, okay?
Yeah, so we get it out. We cycled it two or three times
All right, I'll take it out and try to cycle it a few times.
Trick is we had the hydraulics off
push in and then just pull out really hard
and then and then do it again if you have to these
older machines you know it's not going to go
so smooth all right let's see if Lucky starts
Let's get started.
whoa i know nothing about hay cutters stuff i know
from some research yesterday we got to get
hydraulic going through that line supposed
to be able to do that by cycling it a few times
hopefully there's not too much air in it
we're gonna have to troubleshoot that
They're down there flat.
Jonah's definitely pushing us forward, which is a good thing.
Keep going, go down.
I think we have to start it, because it's in hauling position.
Did we hook up the wrong one?
This won't work.
This is too long to haul, and I'm going to cut it.
All right.
Papa, it's spraying oil out right there.
Oh, boy.
All right.
Did we hook up the wrong one?
Now we got problems.
Whoa, stop, stop.
That's too much.
Stop.
Stop.
I was one little squeeze.
Okay, I stopped.
You're, you're, you're, you're, you're.
you're doing the wrong one did you try
the other lever yeah that's gonna have to be fixed that's
gonna be a pain we're gonna have to fix
that the pressure the hydraulic pressure is going
right through that hose
and that's the wrong one we want this one to engage
I know.
so push down that only lifts it whoa
that was down there it is okay
So now put down and down. That's what happens.
It starts leaking that other hose.
Why isn't it going? Is it locked up? Hold on.
It feels like this is engaged in an upright position.
Oh, it's
very
tight.
You need to disconnect the one on the bottom for it to work.
Okay.
Now, yes, we're going to have to get
that fixed if we ever want the front bucket.
Oh, yeah. Guess what?
Guess what? We're not going to get our front bucket.
How are you going to get your front bucket up in the air?
I'm not the one that picks it up.
The bucket doesn't move, but the other one does.
Okay, I got the hose disconnected,
so now I'm going to see if it works.
See, that's pretty good stuff.
You probably need to grease it.
Where's the grease attached? I don't know!
If there is one, it doesn't work.
It goes up and not down.
That's because the thing is jammed.
You might need to get the skid steer,
and I'll let it down, and you push on it with that.
It needs to be greased so it can be...
Ah, it's supposed to fall with its weight, but because it's messed up.
Go get the skid steer.
Josiah is going to come
and push on it with the skid steer as I release the hydraulic fluid.
So that should work.
With a little pushing from the skid steer, we got it to go up and down.
Did this work?
So you take out the lower hydraulic one.
He's just got the set.
He knew that before even we had to look it up.
What?
Is this going to go up and down?
Dude, it was working.
oh you have to use
that yeah wow now let it
off let it out now see
if it'll do it by itself
So spread out your hands, okay?
Okay.
okay okay we'll do that is that tire low
or is it just all the weight on low
you put some air in that and i am worried about
this how can we have to pull it down
it's just it must be jammed up
and like seized up yeah it could be i think it'll start
getting better and better i barely had to pull that's good
But you only have to do that when you transport it.
The only reason it's like
that is if it had another hydraulic hose on this side,
it would put pressure down.
Yeah.
But the reason they don't do that is because
you would set it too hard on the ground
and then you would dig into the ground with the cutter.
You've got to take our hose and get a new hose.
Let's get these washed.
This one's made wash.
I got it all ready.
What do you mean?
Got the bolt done and the air bailed up.
Wow.
You're raring to go.
You want to go see the grass?
All we've got to do is wait for it to dry out and do.
Those nest boxes.
Get the eggs.
Awww.
That's so weird.
Go in the side by side just now and get the cover for the hay thing.
It's 1130.
You want to try to just see if it cuts?
Yeah.
I don't know if the dew's off.
The dew's not even off on the little grass.
It's so dewy here.
Yes, we magically have water that falls
from the sky here in Western North Carolina.
Getting up hay sure is difficult.
Difficult.
Still dewey at 20 till 12.
Well, we're not going to cut much.
We can't cut cut.
We're just going to see if the cutters work.
You should probably put the cover over it.
No?
One second, one second, one second.
Go on.
If you don't put the cover on it,
it's going to sling it everywhere.
Does it have any straps left?
Just set it on.
No?
Swing it off.
Spinning.
And we're
cutting grass.
That's looking good.
You're cutting grass, which I think we should hay this too.
Yeah.
That's pretty good.
Pretty good, huh?
Hey, yeah, basically an eighty five hundred dollar cutter
for what we got into it twelve hundred thirteen hundred
Yeah, we took a risk taking it free from a neighbor,
but let's zip tie that on and let's grease
Or whatever we need to do to the tether.
Do these have holes from the buckles? Yeah
If not, you got the drill holes 40 year old machine still got it. Yeah
buckles have kind of rotted off of it, but they still have holes in the
material
so we did what anybody would do zip tie through
those holes you sharpen these blades i mean i
could but like i just come over
with the grinder still wet
if you cut it wet it will clump now
i'm learning as i go don't think i'm some expert in hay what
do you think you've been watching some
hay making videos supposed to come out moist
no according to the flexi it's supposed to be
It's going to be dry, right?
This wind is going to help.
Jonah's got to leave at three.
Let's get this mowed
and switched over to the tedder before you have to leave.
Because I feel like you could help us greatly switch out
the implements, which is not always
easy.
And then Josiah and I can handle tedding while you're gone.
Alright, Pop.
You said you're piping these...
Try not to get emotional here.
You said you're piping these vlogs up to heaven.
Can you believe he's been gone seven years?
He's so proud to see his grandson driving his tractor
that he gifted him before he died,
mowing up this land that he loved so much.
We're gonna commune with him now.
Now, growing up, one reason I don't know how to do this,
we got up hay when I was a teenager and below.
Hey, this is the septic tank field.
Don't go in here with the machines.
Hey, it is, don't.
Communing with my dad now because my dad used to yell at me
about that kind of things too, and I didn't listen.
I thought I was smarter than him.
You gotta mow this too!
I'm sure Grandpa Henry, before my dad,
spent plenty of time fussing at him on the land.
So we're four generations.
Okay, we're getting pretty dry at about this time.
Did they give you a pattern to go by?
So you can minimize your turning around?
No, so what I'm going to do though,
and this is what I saw them do.
It's not like a mower where it shoots
the hay out one side.
So I'm just going to go around the edge
back into here and then I'll just do that.
Hey, don't drop through our pastures!
Don't drive through our pastures.
Papa, I hope
that this doesn't take me a long time.
They're your pastures.
It's my first time cutting them.
No, they're not.
They are.
They're not.
It's compaction.
Alright.
It's compaction.
Yeah, we're not about to drive a massive drag car around here.
Alright.
You ready to go?
This thing weighs way more than this.
Wait, how wet is it?
It's actually really bad.
What?
Do you want me to...
It's really bad?
It's dry.
It feels a lot drier.
Yeah, pretty...
I mean...
i don't know if it would ever completely dry out
to be honest maybe by three something i saw but
you have to go a lot of the hay guys would
do is they'll buy these hay cutters that put the hay in
a windrow as soon as they cut it yeah
and then they'll dry the ground out and then they'll ted it
Ted it.
but well the internet was telling me to cut it
and cut it right away all right well let's do it
and this is what we have we don't have
a fancy cutting tedder machine this is historical
What I was saying earlier is my dad,
we did hay, but he could hire somebody.
Hold on it.
You ready?
Yeah.
I tried to do that, but it was proving impossible.
Everybody works full time now,
and they don't cut it when I want to cut it, and they cut
it after they cut theirs.
It's literally impossible with the two or three hay contacts I have.
How's Madre doing?
You all right, Madre?
You all right?
Don't mind us.
We're just cutting hay.
He's going to have to back up.
We're going to have to manually go after him.
and push that down hey you gotta have
me push it oh it goes down get off
the bank that's good
it went back down okay a little wet
not not soaked i mean it laid it
out nice i don't see a whole lot
of clumps you see what clumps josiah didn't seem clumped
that was very capable i like how he just
does it he's the one who took the initiative we're nook
and cranny hay farming too ain't nobody we
Maybe we hire are going to go mow that for us.
Oh no they aren't.
Are they?
Uh uh.
Henry, want me to come get you?
all right come on down let
this excitement never wear off 20 years
on our own oh okay but he said
It's got veins in it.
20 years we've been homesteading and we've yet to cut our own hay
there's always something new
to learn it's always intimidating and scary and
dealing with anxiety and unsureness
and frustrations but then when you get it
it's just that much more exciting this is exciting don't get
no better than this does it Henry
We mowed it! We mowed it! At least a half an acre.
We did it!
Wanna give Papa Papa a high five?
Let's go get the tedder on. Let's get the tedder on.
We're not quite in the clear yet.
You gotta ted it right away. That fluffs it up, gets it drying fast.
And it's hot!
Oh yeah, it's going dry.
You letting
it out?
Yeah.
You can come and try, bro. Look.
Wait, you gotta get the PTO off first.
It slides off when you drive away.
Okay, he's probably lifted these down too hard
No, no, no, get that thing in there.
You guys, be careful.
Yeah, now lift this up so you can see it.
Is there a, there's a pin on it, you gotta engage.
Go forward slowly, go forward slowly.
Set that on some so it's not directly on the ground.
Oh, you're gonna bust PTO
go back down I can't get
it to go down. Oh, no,
why wouldn't it go down?
Is that because we're missing that hydraulic?
Oh, put our hydraulics back in.
Yeah.
But they're leaking.
That needs to be able to stay in place.
What does?
We'll be right back.
Once that's all up, it should.
For the record, we have no idea how to use a tedder.
That's better.
Do you think we drop it down so it can come in contact?
Do you drop it down?
Should we look it up?
Oh, don't turn it off.
It doesn't have an alternator.
I think you just drop it down.
Yeah, but it catches the...
don't ever turn don't turn it off anymore never it has
to touch the ground a little bit I think
okay rev it up too high
is this right it's a week
too late if it is look at
this did it change things
yeah definitely feel like what fluffed it oh yeah
more evenly yeah it feels like it's layered with a
layer of cut grass when before it just looked cut
down it looks like it fluffed it up and put it on top
Yeah.
Which is probably exactly what it's supposed to do.
Imagine dry square hay bales, okay?
I know.
Because look there.
It's probably good.
No, no, it's alright.
We got the square bales.
I'm already thankful for them.
Yeah.
Did you ted that section?
I'll have to run down through there.
Okay, you gotta go.
What time is it?
3.50.
I'm over right there.
Okay.
And then if I want to move, I just pick it up.
And that's normal to have this set of tilt?
Yes.
If this were level, how would you go over it?
Well, you don't want it to be level.
Why not?
I've really seen guys cutting it.
Throw it up.
Get that somewhere where
the battery can be charging tonight.
It's time to go get the hay baler.
Upon arriving to the machine,
the seller gave us a quick tour
and some tips on how to use this thing.
Hooked to there.
This piece slides back like that.
So it's a little aggravating.
You gotta slide it back and push it on at the same time,
line it up, push it on.
So I think that'll ride okay going home.
This pin here, when you get in the field,
you pull this this is designed to go up actually hook on the tractor
so you can pull it from the
tractor all right um but that pin pulls
and then that it's easier to put like a block against this
wheel and then that pivots over
to these holes right here whichever one lines up for what you
want to so that throws your baler out where you it lines up
on your um windrow okay this is for
transportation mode for the to pull it on there's two settings yes yes
which setting do you usually
do we always use on this one here i'm thinking
because the way the wear mark is on it yeah
yeah yeah um but i don't know for sure i don't remember
for sure on that but either way whatever
you know lines up for you that works best
for you all right typically you want to run your tractor
beside where the windrow is right here and it's picking up you've
got okay you've got this much oh that'll all pick it up okay yes
when you get in the field you pick up on this take
this little pin out watch watch this and then that comes down
so it's picking up and it rides on there idly idler and um and then
You just let that go all the way down?
Yeah.
All right.
It'll pivot and ride.
That's why the wheels are so it doesn't dig this into the ground.
And then when you're ready to put it back on the road,
it's kind of notched that it
goes in right there.
Yeah.
And then that goes in and keeps it from popping back.
All right.
This has a shear pin right here.
So if you get in heavy hay,
instead
of hurting something,
it'll shear that pin.
If you grab, sometimes it'll grab like a big chunk
of hay in all at one time or whatever and it's
too much for it and so it'll shear that pin.
Where do we get shear pins? You just um you can
just the size bolt I don't remember now what size bolt it
is and then that's a lock nut. All right.
And then so what happens you just gotta line take
this and line it back up. Yep. Run your pin in.
Here's your um gearbox. Okay. And um there's a check somewhere there.
Good looking sight and I think plenty of time for dark.
Look at this machine. We got a few
things still to do. There's some tire.
There's some soil leaks in the tire.
There's the baling twine.
Let's get this unloaded and check our drying hay one more time.
Whoa! Good job. Still smells very much like grass.
I imagine I'll start smelling like hay soon.
You can feel some moisture in it. I mean my hand's not wet.
But I'm very hopeful.
We're learning as we go here.
All right.
Another tedding tomorrow, maybe two.
See you then.
Happy day.
