※Amazonリンクはアソシエイトリンクを使用しています。 ................................................................................................................ 【camera】 SONY zv-e1 https://amzn.to/3Ps1kKI SONY zv-e10 https://amzn.to/3PJyGpI
Hello, everyone.
We are developing this round table with the aim of starting sales by the end of this year.
The size of the tabletop was supposed to be Φ110cm, but we have received many requests for Φ90cm.
We made this prototype version and this prototype version..,
This is a prototype of a natural color that is lighter than the previous ones. And this time, in addition to these introductions..,
I made a new dining table for our new house in Tokyo. Here is the dining table.
The ideal table that we would like to have, with storage for wiring cords and varying heights.
We think this furniture has a “roomy” quality to it (more on that later!).
If there is anyone who would like to have the same, please let me know,
I would be very happy to receive your feedback as I would like to move towards selling it!
First, let's talk about the dining table.
The table is made of stacked Wacca-shaped objects, including the legs.
I'm thinking of calling it the Wacca Table.
This table is multifunctional for use in my home, which is not very spacious,
I think this table is good for “using a large room”.
There are three points.
01: The number of furniture is reduced by “doubling” the function of the table. 02: The shape of the table gives space to the space. 03: Variable height to fit your comfort and lifestyle.
In a typical room, there are dining tables, desks, low tables, etc,
Each table may be placed for each function, as in a one-to-one correspondence.
If you put all of that in a limited space, it can make the room feel smaller.
This table is in addition to the normal dining function, (Size is Φ130cm by the way)
The table is designed to allow wiring to be routed through the table, and the lid in the center of the tabletop can be opened to use a power strip,
The design makes it easy to “combine” the functions of a desk with those of a desk.
The height can be changed to match the height of the sofa.
The height can also be changed so that it can be used as a low table,
Some of the previous table functions can be “combined” in one piece of furniture.
For some people, this may be an opportunity to reduce the number of pieces of furniture in a room and to increase the space available.
Shape that gives more space
Compared to a square, a rounded shape gives a sense of spaciousness while maintaining a certain degree of size
The most important reason is that there are no corners, and the flow line can be secured in all directions.
Easy to move around even in narrow space
Easy to get in and out, even when used on a sofa
Can be used by multiple people from all directions, anywhere you want to sit, and the number of people who can gather is variable.
The round shape allows for storage and other furniture to be placed in close proximity,
The elimination of corners has the effect of softening the relationship with surrounding objects.
It is a form that can be used effectively in a limited space.
Variable height to fit your comfort and lifestyle.
The average table height is around 70-75 cm, but it depends on your physique, the size of your room, and the chairs you have,
In fact, the height that seems comfortable is different for each person.
Have you ever had trouble finding the right height for your body size or space and wanted to buy a new one or cut the legs off?
This table is made of stacked legs of different heights,
Starting from 75cm, the height can be changed to 23 different heights depending on the combination.
By the way, in our house, we have a chair for our child and a low stool that we have been using for a long time.
I set the height at 65 cm.
Since it is lower than the usual 70-75 cm, it also makes the space feel larger.
This is 75 cm, and,
This is 65 cm.
It blends in with the space and is a height that I personally feel comfortable with.
Also, as one's lifestyle changes, such as when one moves, the furniture one needs also changes.
Do you buy more furniture each time you move?
This table can be used with chairs, of course,
This table can be used as a lounge table with a sofa,
It can be used like a lounge table, like a sofa,
It also fits with changing lifestyles and moods, such as moving or redecorating.
Variable height may provide an opportunity to use space effectively and comfortably for a long time without buying more.
By the way,
The finish is oak veneer, stained a subdued glaze color to match the interior color of our home.
The bottom of the legs have openings for wiring,
Cables can be routed through the table like this.
The legs are joined together like this,
187 00:07:23,250 --> 00:07:31,375 A twist of the wrench brings out the metal hardware, and the top and bottom are joined together.
Normally, when you change the height of the legs, you would have to..,
although there are pedals, buttons, and other things that would make that mechanism visible from the front,
This method is simple, like a daruma drop, where the legs are piled up and pulled out.
I think it has the advantage that it is usually difficult to see such a mechanism as it looks.
I'd like to hear your thoughts on this, so I'd like to know what you think! or I would like to have a table like this! etc.
I would be happy to hear your comments!
Also, here's the table I've been showing you for a while
since it appears to be made up of three Plate (Plate: Plates),
I am thinking of calling it Plate Table.
217 00:08:34,958 --> 00:08:41,500 This is also possible to change the height by combining legs of different heights.
The height was originally set at about 60cm with sofa use in mind,
We also wanted a height that could be used with a normal chair! We have decided to use 70cm as the standard. (By the way, our house is 65cm)
We have a Φ110cm tabletop, but we made a Φ90cm tabletop, as many people commented on it.
First of all, we made it out of lauan plywood without any simple mechanism to change the height, just to check the size.
Simple combination of 3 boards
Legs in a crisscross pattern
Put the top board on top.
Compared to Φ110cm, it looks like this
When you sit on a chair, it looks like this size
Due to the nature of the design, the legs tend to hit the chair when sitting on it, so the size of the top panel is smaller,
I was concerned about the feeling of use, but it seems that it is not unusable at all.
It looks like you can stretch your legs if you use it at a slightly different angle.
The size of Φ90cm seemed to fit in a more compact space.
Also, the current color is a calm glaze-like color, but we also considered a natural color, which was requested by some.
We will assemble it immediately.
The color is not too strong, and the impression is natural and calm.
The yellowish whitish color of the linden wood is reduced and calmed down to create a natural color.
It looks good with oak stools.
It also blends well with Boo.
Compared to the glazed one, you can see it looks a little brighter and more natural like this.
Basically, we are thinking of commercializing the product in these two colors, as well as including an unpainted version, which has been requested by some customers.
We would like to have a display of the product so that people can experience the product firsthand and get a better feel for the product.
I would like to hear your impressions as well.
Here is the backstory of Plate Table as an extra chapter. I would like to introduce the process of making Plate Table so far.
The process of solving problems that we didn't realize at the beginning is also an interesting part of the manufacturing process.
The first issue to be considered was the mechanism for changing the height.
At the beginning of the prototype, this kind of hardware was installed in the legs, and the legs were tightened by rotating screws.
However, this method requires a lot of work and sometimes becomes hard to tighten.
The MARUMIYA team worked a lot to make this work, and they were able to make it work,
The current design has a metal fittings like this, and when you twist it with a wrench, the fittings for fixing come out.
The current situation is that the metal fittings are installed and when you twist them with a wrench, the fittings come out,
The hole for the wrench is also made inconspicuous by matching it to the design feature of the dug-in area.
The functional significance of the design feature was also a good point.
Next, let's talk about that ribbing process.
We use this kind of NC machine tool, and in the beginning, the bottom of the ribs could be crumbly.
After several considerations, we found that by adjusting the digging in deeper, we could achieve a clean finished surface.
Actually, the ribs are machined by machine, but the craftsman finished the corners neatly one by one.
It is a combination of machine and human hands.
Also, we considered several shapes for the intersection of the legs because of the unevenness in the ribbed process.
Finally, we chose a shape that looks simple and clean.
The color of the finish paint was also studied by making many samples like this. Colors are really difficult to choose.
The color of the finish is very difficult,
This is what we have reached so far!
Plate Table
There are some things that we can't notice until we use it for a certain period of time, so at present, we are using it as a trial period for ourselves.
We are in the process of making minor adjustments and considerations, including paint color and size development for the finish.
We are trying to make it as good as possible, so we hope you will continue to keep an eye on it!
I'd be happy to hear your feedback on Wacca Table as well!
I would like to create an opportunity for you to experience the real thing if possible.
I would like to see the real thing! If you think so, please comment or subscribe to our channel!