#Aviation
#AutogyroPlane
The Tensor 600X VR demo video shown in this video was produced by 'VSKYLABS Aerospace Simulations'. Using it here was following their permission. VSKYLABS website: www.vskylabs.com Germany's Fraundorfer Aeronautics started test flights of a prototype two-seat gyrocopter in 2019, with a plan to introduce a six-seat version by 2025. The Donauworth-based company unveiled the Tensor two-seater in May 2019, which it is now preparing for flight testing. Certification – initially as an ultralight aircraft for the owner-flyer and training markets – is targeted for "summer" 2020. Deliveries are scheduled to begin later that year, says Fraundorfer's head of sales and marketing, Klaus-Peter Leinauer. The manufacturer's strategy is to expand the platform's capability and customer base in stages. Certification as an aerial observation and special mission platform under European Union Aviation Safety Agency regulations is planned for 2022, and approval for a six-seat variant suitable for the air taxi market is scheduled for 2024-2025, says Fraundorfer. At an airspeed as low as 22kt (41km/h), the Tensor will offer similar capabilities to a helicopter but will be much quieter and cheaper to operate, says Fraundorfer. Take-off will require a 90m (300ft) ground roll, while landing will be possible within 30m, the company adds. The aircraft will have a maximum cruise speed of 115kt, and a range up to 320nm (593km). While the gyrocopter concept is not new, Leinauer says the Tensor has a more refined design and performs better than existing platforms. The manufacturer used modern computational fluid dynamics analysis to optimise the rotor head and an airframe that features a fully enclosed cabin. A pair of winglet-equipped wings aft of the cabin provide up to 30% of required lift at high speed, thus reducing pressure and drag on the rotor. Illustrations indicate that the six-seat variant will additionally be equipped with short canard wings for more lift and stability. A pusher propeller – with three blades on the Tensor and six blades on the six-seater – is integrated into the tail boom, leading to an empennage with a horizontal tail plane and three down-facing fins. The two outer fins are connected, via struts, to the main wings. Leinauer says Fraundorfer's design will provide a higher degree of aerodynamic stability than in other gyrocopters at both high and low airspeeds. In stable flight, he says, pilots will be able to take their hands off the controls and the aircraft will maintain its attitude. While the gyrocopter will initially be powered by a Rotax piston engine, Fraundorfer foresees that the aircraft could alternatively be equipped with fuel cell- or battery-powered electric motors or a hydrogen combustion engine.
Let's take a look at some of the most incredible homemade drones. Sources & Credits: 7. Flyt Cycle • Guy builds working hoverbike in garage 6. ZEROG • ZeroG Manned Drone 5. Aerobatic Drone • DCL Big Drone: The Groundbreaking Man... www.dcl.aero 4. Koncepto Millenya / @flyingkyxz 3. Jetson One • Jetson Electric Flying "Sports Car" -... 2. Airboard 2.0 • Dragon Air Aviation Airboard 2.0 1. Hero Flyer / @heroflyer471 Please contact me at [email protected] if there are any issues related to the content being used & will edit or remove the video. Music: "Sport Electro Action Music" By audio_atomy & "Modern Technology" From Envato
The Shell tagged products below. Learn more Concorde - Small world Premium Ring-Spun Cotton T-Shirt ₫689,730 theshell.creator-spring.com/listing/concorde-small-world?product=46&variation=2739&size=423&srsltid=AfmBOooN3Fw6xrjBQ6PX79qcF2c6kwPY4WHkg7P2XEfG0H7h96gNsawIRZU This is K-MAX, an anxiety machine, also known as a synchropter, or, intermeshing-rotor helicopter, which is a synchronized twin-rotor, turning in opposite directions. The intermeshing-rotor helicopter, also known as a synchropter, is a unique twin-rotor design where two rotors turn in opposite directions, eliminating the need for a tail rotor. Developed by German engineer Anton Flettner in the 1930s, this design later evolved in the United States after Flettner moved there post-WWII under Operation Paperclip. The Kaman Aircraft Company, where Flettner worked as chief designer, produced the notable K-MAX series, which leverages intermeshing rotors for improved stability and high payload capacity, particularly useful for heavy-lifting tasks such as logging and mountainous cargo transport. Two key features ensure the rotors don't collide: a 25-degree tilt between the masts and synchronized gears that maintain rotor alignment. The K-MAX further reduces weight and complexity by using a servo flap system for rotor control instead of traditional hydraulics, a design refined by Kaman’s founder, Charles Kaman. Synchropters like the K-MAX offer several advantages over conventional helicopters, including quieter operation, lower maintenance, and efficient fuel usage, making them effective for cargo transport. Despite these benefits, their lower speed and rotor turbulence at high velocities limit widespread use. Synchropters are less common due to production challenges and demand, though NASA has shown interest in adapting this technology for urban air mobility due to its efficiency and compact size. However, production of the K-MAX halted again in 2023 due to low demand, though the manufacturer may revive it if demand increases. The versatility of intermeshing rotors showcases the potential for specific applications, but widespread adoption remains limited compared to traditional helicopter designs. ----------------------------------------------------------------------------------------------------- Note 1: This video is an adaptation of a video from my Brazilian Portuguese channel called "Integrando Conhecimento". Note 2: "The appearance of U.S. Department of Defense (DoD) visual information does not imply or constitute DoD endorsement."
Our test pilot goes FUN mode. It all started in a small apartment in Poland where founder Tomasz Patan built the first prototype of Jetson. This idea and vision of realizing everyone's dream of flight attracted talents from all over the world who took on the challenge of redefining air mobility and creating something so exciting and revolutionary. Today the incredible and lean Jetson Team is materializing the futuristic Personal Air Vehicle that is leaving the production line and already redefining the air mobility. SN1 is proving itself to be a strong and solid kickoff to the first of many Jetson ONE units. The excitement from our community has been incredible, and we’re back with even more from the field. Your enthusiasm fuels our drive as we move full speed ahead, as our serial production is starting. Jetson is on a mission to define the future of air mobility and transportation. Please share and subscribe. With your support the future of personal aviation begins now! Website: https://www.jetson.com/
Fairey Rotodyne was a revolutionary design project that should have reshaped public transportation worldwide. The fairey aviation company designed this unique VTOL aircraft for use as flying bus that could land and take off from a conventional helipad. But how this engineering marvel could perform it? In this aviation history documentary, we will talk about the design and development of this unique aircraft of the past! This incredible engineering outperformed all helicopters of that time and was capable of impressive flying specs. Watch this historical documentary about Fairey Rotodyne and learn the secrets behind this unique aircraft.
The Plane That Will Change Travel Forever Vertical Aerospace Segment • CNN Blueprint - Vertical Aerospace Segment • Vertical Aerospace - eVTOL Flight Test - P... Magnum MK1 • Eneron | Magnum MK1: Next Generation Abu D... Flying Car Renault Air4 • Flying Car RENAULT AIR4 OLA AirPro • Introducing the OLA AirPro | The world's f... Boom Overture • Why Boom Supersonic WILL succeed! Universal Hydrogen • World's Largest Hydrogen Powered Plane Com... Dirisolar Solar Powered Airship • DIRISOLAR Solar Powered Airship Orb Nomad • Orb Nomad - The Next Airplane is an Orb • Orb Aerospace Paragon VTOL Aerospace • Paragon VTOL Aerospace Anavia HT-100 • ANAVIA HT-100, uma solução para as forças ... Suzuki Moqba • 2025 NEW SUZUKI MOQBA UNVEILED!! • SUZUKI MOQBA Image Movie Node Air • NODE AIR - Animated Film Kawasaki J Concept • Kawasaki Revealed 'J-Concept' - The Most F... North Freespeed • Soaring Speeds, Enhanced Control | North W... Rolls Royce Future Shore • Rolls Royce future shore control centre Sukhoi Superjet • The Rise and Fall of the Sukhoi Superjet • 1st Flight For Russia's Superjet 100 Power... Airbus A400M • What if the Airbus A400M was a passenger p... Avro Vulcan • The British bomber made to defeat Russia..... Kawasaki - P1 • The Japanese passenger plane made to hunt ... 00:00- Intro 00:18- Avro Vulcan 01:11- Sukhoi Superjet 02:04- Vertical Aerospace Segment 03:03- Boom Overture 04:03- Orb Nomad 04:51- Kawasaki J Concept 05:41- Airbus A400M 06:34- North Freespeed 07:22- Rolls Royce Future Shore 08:11- Kawasaki - P1 09:06- Suzuki Moqba 09:59- Node Air 10:50- Universal Hydrogen 11:41- Dirisolar Solar Powered Airship 12:30- Magnum MK1 13:20- Flying Car Renault Air4 14:10- OLA AirPro 15:00- Paragon VTOL Aerospace 15:50- Anavia HT-100 Thanks For Watching Video !!! For copyright matters please contact us at: [email protected]
SUNPCOM one is a safe and practical eVTOL that makes your dream of flying come true. This aircraft is now in mass production. Place your order today—contact us at: E-mail: [email protected] Website: www.sunp.com










