Brownells Gun Tech™ Caleb Savant dug into his own vault and found this Model of 1917 Enfield rifle built by Winchester. The M1917 is a British Pattern 1914 Enfield (P14) chambered in .30-06 Springfield instead of .303 British. During World War I, Winchester and other American gun makers built a lot of P14 Enfields for the British army. When the U.S. entered the war in 1917, production of M1903 Springfields couldn't be ramped up quickly enough, so the most expedient way to manufacture enough rifles for the newly recruited Doughboys was to crank up production of Americanized Enfields. The M1917 is more than robust enough to handle the .30-06 cartridge and go toe-to-toe with the German Mauser 98. The sturdy front sight is machined from one piece of steel, and typical for the period, the full-length wood stock completely envelopes the barrel. The steel wings that protect the aperture rear sight are actually machined as part of the receiver itself. A flip-up ladder extension is adjustable for targets out to 1,600 meters. Given its length, the M1917 Enfield is not a good CQB rifle, but it is an excellent weapon for lobbing volley fire over the trenches to keep the enemy pinned down. The M1917's safety functions only when the firing pin is cocked, and it actually disconnects the trigger from the sear - far more reliable than the typical trigger-blocking safety.
Rifle grenades were developed during the First World War to bridge the range gap between hand-thrown grenades and trench mortars and to give infantry more convenient close fire support. In this video, I head out to the range to demonstrate three different rifle grenade systems: -British No.1 Mk.III Short Magazine Lee Enfield (SMLE) with Burns 2.5-inch discharger cup (WWI Era) -German Mauser KAR98K with Schiessbecher discharger cup (WWII Era) -French MAS 36/51 with 22mm NATO grenade launching spigot (1950s/60s)
The main British sniper rifle of World War Two, and arguably one of the best looking military sniper rifles of all time, the No4 MkI (T) was something the British military knew they would want even before the No4 MkI rifle had gone into real production. The first No4 snipers were built on leftover trials rifles from Enfield, and the pattern was formally introduced in February of 1942. First use was in North Africa, but the fighting there was not really suited to sniper rifles, and the weapon’s practical combat debut was in Italy in 1943. The No4 MkI (T) was a conversion of a standard No4 MkI rifle, using examples chosen for particular good accuracy. They were sent to Holland & Holland to have scope mount bases added and No32 telescopic sights fitted (along with cheek risers on the stocks and having the battle sight aperture ground off to allow room for the scope bell). Between 23,000 and 26,000 were made during the war, and they would continue to be used in the British military for decades, including later conversion into 7.62mm NATO L42A1 rifles.
Joe breaks down the Japanese Type 97 anti-tank rifle: a 20×124 mm, open-bolt, semi-automatic giant introduced in 1939 and used through WWII. 0:00 Intro 2:00 Muzzle brake, gas system, recuperator, sights, mag 5:00 Disassembly: recoil springs, bolt & locking piece, barrel off 8:50 Gas split, recuperator function, open-bolt & trigger reset (semi-auto only) 15:10 In service: 11-man crew, transport, penetration figures & shifting roles 18:50 Successors, misconceptions & Outro
When World War One broke out in 1914, France mobilized millions of men into military service - and it became abundantly clear that a lot of new rifles would need to be manufactured. The 1886 Lebel was no longer in production and was a slow rifle to make in any case - but the 1907 Colonial Berthier was being produced already, and was a more efficient design as well. By late 1914, plans were underway to drastically increase Berthier rifle production. A few changes were made to the 1907 pattern, mainly changing the front end to accept the standard 1886 Lebel bayonet (""Rosalie""). After the first 80,000 had been made, the bolt handle was also changed from the bent carbine style to a heavier duty straight type. With these changes made, the Modele 07/15 was ready for mass adoption by the infantry, where it would serve side by side with the Lebel. The primary manufacturer of 07/15 rifles was the St. Etienne arsenal, which build between 1.0 and 1.2 million of them by the spring of 1917. The Chatellerault arsenal produced another 436,000, and the Delauney Belleville automobile factory retooled its workshops to make rifles, producing another 170,000 of them. The Remington company in the US also took a contract to make 250,000 Berthier rifles, but was unable to meet the terms of the contract. Remington had taken on more wartime production work than it could handle, and failed to meet French quality and scheduling requirements. In August of 1916 that contract was cancelled, with just 9,440 rifles sent to France for use. The remaining 5,000-10,000 that had been made by Remington were sold on the commercial market in the US. By 1916, it was clear that the 3-round capacity of the Berthier was a very real disadvantage (both tactically and psychologically) to the German Mauser rifles, and an upgrade program was put underway. This would ultimately become the 1916 pattern and would go into production in 1917.
The Lahti L39 was the Finnish answer to the need for an anti-tank rifle, developed just before the Winter War. The rifle was created by noted Finnish designed Aimo Lahti, who had pressed for it to use a 13.2mm cartridge. However, arguments for using a 20x138B cartridge won out, based on hopes to use that cartridge in both antitank and antiaircraft roles, as well as testing that showed the 20mm projectile to have greater terminal effect. The L39 was not available for use in the Winter War (having been adopted barely 2 months before the Russian attack), but was used extensively in the Continuation War. While improved tank armor quickly became thick enough to protect against the round, it was used for a variety of anti material roles, attacking machine gun positions, bunkers, light vehicles, and more. In 1944, an anti-aircraft version was also produced, firing in full auto and using 15-round magazines.
The ZK-381 was designed by Josef Koucký, his first design of 1938 (hence 381). This is one of the last of the Czech pre-war self-loading rifle projects, of which there were quite a lot. It uses a tilting bolt and a short-stroke gas piston, with ZB26 machine gun magazines and chambered for 7.92mm Mauser (although they would have been happy to offer a model in any other modern rifle cartridge). It was tested in the spring of 1938 by the Soviet Union, which liked it enough that they requested a model in 7.62x54R - and those were tested in November 1938. Ultimately domestic Russian designs were chosen instead, and tests in German, France, Spain, and Italy also led to naught.
Luke Tomes travels to the Royal Armouries in Leeds to fire some of the most iconic weapons of the Second World War belonging to the British Army. As always he is joined by Keeper of Firearms & Artillery, Jonathan Ferguson who talks him through the history of all the pistols, rifles and machine guns employed in the conflict. First up is the Webley Revolver Mk VI, first introduced during the stalemate of static and bloody trench warfare in 1915. Designed as a top-break revolver with a double-action mechanism and potential speedloader accessory, the Webley Mk VI was considered to be vastly superior to its predecessor models - its 6 inch barrel also offering improved accuracy. Whilst the official service pistol for the British military during the Second World War was the Enfield No. 2 Mk I revolver, a shortage in production led to many Webley’s returning to front line service in the conflict. Second is the Lee-Enfield No. 4 Mk I, the new and improved bolt-action rifle issued to British infantrymen during the latter half of the Second World War. Introduced in 1941, the weapon was built upon the legacy of its earlier models, specifically designed to meet the demands of an ever-changing style of warfare. With a 10-round .303 detachable magazine and robust bolt-action mechanism allowing for rapid cycling, the No.4 Lee Enfield enabled trained riflemen to achieve an impressive rate of fire, a hallmark of British infantry tactics since the First World War. Third up is Sten, designed by Major Reginald V. Shepherd and Harold J. Turpin and introduced in 1941. A cost-effective replacement for the Thompson, the Sten would prove to be a widely used and effective submachine gun used by British soldiers across multiple theatres of the conflict. Notable for its magazine placement at the side of the gun, the Sten was capable of firing 500-600 rounds per minute. Last but not least is the Bren Light Machine Gun. Derived from the Czech ZB vz. 26 but adapted to meet British military requirements and replace the old Lewis Gun, the Bren would quickly become a cornerstone of British infantry firepower. The centrepiece of every infantry squad, the Bren’s box magazine was filled with 30 .303 rounds, used in the standard Lee Enfield rifles and also carried by virtually every soldier to ensure the weapon was always supplied with sufficient ammunition. 00:00 Introduction 02:13 Webley Revolver Mk VI 08:49 Firing Webley Revolver 11:47 Lee-Enfield No. 4 Mk I Bolt-Action Rifle 18:31 Firing Lee-Enfield 21:43 Sten Gun Mk II 27:42 Firing Sten Gun 32:30 Bren Light Machine Gun 40:44 Firing Bren LMG
The De Lisle carbine is one of the quietest firearms ever created, purpose-built during World War II for clandestine missions. Chambered in .45 ACP and equipped with an integral suppressor, it allowed British commandos to operate with near-total silence. In this video, we put the legendary De Lisle to the test on the range. Can you actually hear it when it fires? How effective is the design compared to modern suppressed rifles? We’ll explore its history, mechanics, and most importantly—just how quiet it really is. Join us as we test one of the rarest and most fascinating rifles of WWII.
Join AusArmour Assistant Manager Jason Belgrave for an exclusive look inside the museum’s underground WWII shooting gallery. In this behind-the-scenes tour, Jason showcases a remarkable collection of authentic WWII rifles and gives us a close-up view of how these historic weapons perform. From bolt-action classics to iconic wartime designs, experience the power, precision, and history of the firearms that shaped a global conflict — all in a unique live-fire setting.
Prior to World War Two, the Soviet Union had a rather lackluster interest in antitank rifles - a series of guns were developed, but slowly and without all that much success. The Barbarossa invasion gave a very immediate need for just this sort of weapon, however, to give Soviet infantry units an organic anti-armor capability. Two star Soviet designers were tasked with designing AT rifles, Degtyarev and Simonov. The cartridge they were to use was the new 14.5x114mm, a high-velocity monster using a tungsten carbine cored projectile. After a shockingly fast development period, the guns from both design bureaus were accepted. The Degtyarev became the PTRD-41, a single-shot auto-ejecting design that was extremely cheap and fast to produce. The Simonov design became the PTRS-41, a 5-shot semiauto offering more firepower but also taking longer to produce. The Degtyarev entered service first, with the first substantial deliveries of PTRS rifles arriving in 1942. Both designs would serve through the war, with hundreds of thousands being made. Many were put into storage in 1945, and they are still seen today in Ukraine periodically. The PTRS would go on to be the basis for Simonov's 7.62x39mm infantry rifle, adopted as the SKS.
Jonathan takes a closer look at three remarkably similar rifles to answer a fascinating question: When is an Enfield a Mauser? Join us as we explore the overlapping design features, mechanical similarities, and shared historical influences behind these iconic firearms. Whether you're a military history buff or a vintage rifle enthusiast, this deep dive reveals how wartime necessity and global influence shaped the evolution of bolt-action rifles.
The first production version of the FG42 used a fantastically complex milled receiver and a distinctive sharply swept-back pistol grip. A contract to make 5,000 of them was awarded to Krieghoff in late spring of 1943, but by the fall its replacement was already well into development. The milled receiver used a lot of high-nickel steel which was becoming difficult for Germany to acquire, and it was decided to develop a stamped receiver to ease production obstacles. Ultimately only about 2,000 of the early Type E FG42 rifles were actually made, and only 12 or 15 are registered in the US. They are a remarkably advanced rifle, and extremely interesting.
Unused / unissued material – dates and locations unclear or unknown. VS of King George VI inspecting soldiers of a Rifle Regiment. VS of Regiment marching. Soldiers give eyes right and carry rifles at the slope. Dais is not seen.
The Soviet Union had originally eschewed the use of large numbers of antitank rifles, anticipating that any potential combat use of them would be largely against tanks impervious to AT rifle cartridges. However, when German forces came flooding across the border in 1941, the Soviet Union found themselves being attacked by quite large numbers of tanks which were in fact vulnerable to an antitank rifle cartridge. Stalin ordered an immediate development and production of such a weapon, and the designers responded with concepts. Simonov produced the PTRS-41, a semiautomatic 14.5mm weapon that was sophisticated, expensive, and effective. Degtyarev produced the PTRD-41, a single shot 14.5mm weapon which was simple, cheap, and also effective. Both used the same cartridge, which fires a 980gr armor piercing projectile at a remarkable 3320 fps. Both the Simonov and Degtyarev rifles were ordered into production, with the PTRD-41 being available and fielded within a month because of its very simple nature. By the end of the war some 185,000 of these rifles had been made, and even after the new German tanks became impervious to them, they remained effective weapons for use on light armored vehicles, field guns, machine gun nests, pillboxes, and other hardened targets. The PTRD-41 is a mechanically interesting and unusual weapon in that despite being only a single shot system, it is recoil operated. When fired, the entire barrel assembly recoils rearward, absorbing some of the immense recoil energy and also opening the bolt and ejecting the spent case. The shooter then need only drop a new cartridge into the action and close the bolt to be ready for a subsequent shot.
In fall 1914, the British and French armies on the First World Wadustr’s Western Front were wrestling with a problem: unseen German riflemen were picking off any man who showed himself above the trench. Something had to be done about it – and the result was the birth of the modern sniper.
Learn about the British Rifle Section during WW2, along with the weaponry they used and follow the changes made between 1940 and 1945.
Anthony Fokker, best known for his pioneering aircraft designs in World War I, had no direct role in the development of Japanese Army semi-automatic rifles. However, Japan’s interest in semi-automatic firearms paralleled global advancements in military rifle technology during the early to mid-20th century. The Imperial Japanese Army experimented with semi-automatic rifle designs, including the Type 4 (Yon-shiki) rifle, heavily inspired by the U.S. M1 Garand. This late-war development aimed to provide Japan with a more modern infantry weapon, but production remained limited. Earlier experimental models, such as the Type Hei and Kijiro Nambu's prototypes, attempted to integrate semi-automatic functionality into Japanese service rifles but faced technical and logistical challenges. While Fokker revolutionized aerial combat, Japan’s semi-auto rifle development was influenced more by Western firearm innovations and wartime necessity than by his engineering contributions.
Starting with the M91 rifle adopted in 1892, the Carcano would be the workhorse of the Italian military through two world wars and many colonial expeditions. The rifle is a simple but durable and reliable system with a Mauser type bolt, split bridge, Mannlicher magazine/clip system, and Salvatore Carcano's safety design. It was designed around a 6.5x52mm cartridge, the first 6.5mm military round adopted by any nation and using progressive-twist rifling. The Carcano action would remain unchanged through all models of production until the end of World War Two, and it was a simple enough system that no "last ditch" sport of simplification was needed when the stresses of wartime manufacture began to press Italy. It is a much better system than it is generally given credit for.
In the very first edition of our livestream with Othais from C&Rsenal, he introduced us to the French guns of World War 1, such as the Berthier carbine or the Lebel rifle. This is the first summary of our session surrounding the rifles that the French took into battle and their design. If you are curious to find out more about these, check out Othais' videos where he goes into even more detail about the individual firearms. In the second summary we will talk about French pistols.




















