When Is an Enfield a Mauser?

Military Rifle History
1 follower
Jun 29, 2025
Jonathan takes a closer look at three remarkably similar rifles to answer a fascinating question: When is an Enfield a Mauser?
Join us as we explore the overlapping design features, mechanical similarities, and shared historical influences behind these iconic firearms. Whether you're a military history buff or a vintage rifle enthusiast, this deep dive reveals how wartime necessity and global influence shaped the evolution of bolt-action rifles.
Hi guys, Jonathan here with our weekly weapon. We have three laid out today, all closely related
parts of the same family. Now this story is going to touch on various other rifles that I don't have
here on the table today. You'll be familiar with the two main rifles that I'm going to reference
So what are we looking at? So long story short before I dive into the whole story here,
this rifle in the middle here is the Patton 1913. Now what might throw people off
is how very close in appearance this is to the Patton 1914, a better known British rifle,
and the Model 1917, a very important and famous American rifle. And spoiler alert, they are all
the same rifle. And this is the daddy as it were. So this actual story starts in 1908, not with a
rifle but with ammunition and some fairly speculative trials to see if the already quite
venerable .303 round could be modernized. Not specifically to make it rimless, although that
did become part of the project, but to experiment with reducing the diameter of the bullet and
increasing its velocity. Why would you do that? Well, it's part of a long trend throughout
firearms history to make bullets lighter and faster. You make them lighter, you carry more of
and you can also push them harder and faster and flatten trajectory out. So rather than a big heavy
bullet doing this, you end up with a small fast bullet doing this. Why? Well, it's much easier
to aim and hit what you're shooting at with a bullet that goes dead straight.
Those of you who've played video games, the way bullets used to work certainly in games is that
you fire and effectively a laser beam comes out and it tells the game where the bullet has hit
in a perfectly straight line out to infinity. Well, that's ideally what you do with real guns.
So that's kind of what they were looking at with this small caliber high velocity
project. They were looking at 0.256 of an inch but also 0.276 of an inch and it was that diameter
of bullet, really quite small, that became this new experimental cartridge. In parallel to that,
from 1910 onwards, we had trials for a new rifle and these two things go together.
So the rifle trials are aware of the ammunition trials and vice versa. So the rifle actions for
these experimental rifles had to be designed with a high pressure cartridge in mind. You can't get
high velocity without increasing the pressure inside the chamber. So you need a really strong
action and although the old Lee-Enfield, SMLE being the current variant of that,
action is perfectly strong enough for something like .303, for something like they were looking
at it wasn't going to cut the mustard. We also had some pretty vocal complaints following the
Boer War where the Lee-Enfield had come in for some serious criticism. Some of that was down to,
or a lot of that actually to be frank, was down to who was using it and in what situation and
that's military history, that's not my sphere to stray into too far. Suffice to say the lesson
they learned was that the Boer farmers, some of whom were expert marksmen, they were hunters
apart from anything else, some of them had the latest German Mauser rifle, the Model 93, Model
96, that series that would be perfected with the Model 98. So by this time it's the 98 that
Imperial Germany has and we can kind of see where things are going on the
European stage. So we're also keeping an eye of the Brits on what the Germans are doing. So our
recent enemy that was able to defeat us in some situations with an accurate modern flat shooting
bolt-action rifle and then our immediate rival on the continent has got an even better version
in theory of the same rifle. So we're looking at replacing the Lee-Metford Long Lee-Enfield
and the latest variant of that the Short Magazine Lee-Enfield but it's also recognised that the SMLE
is also a really good rifle. Short, light, handy, quick to bring into action, quick to operate with
a rapid bolt action and it has 10 rounds on it. So certain lobbies, the target shooting military
lobby love to go and shoot their rifles at Bisley as well as in on campaign, very keen on basically
getting a Mauser and the government kind of wanting to get the best for the troops effectively. So
a lot of Mauser influence was going to come into this possible new replacement for the SMLE.
So a war office specification was issued, this specification kept the length and the weight
of the SMLE, the idea of a universal rifle so no carbines, everyone gets the same short rifle that
was supposed to be kept as well. They liked the all-enclosed nose cap on the end of the SMLE,
kept everything neat and compact and they wanted to keep the same recoil energy and capacity of 10
rounds. So the first thing to look at is one of the prototypes of the P13, so it's almost like a
prototype of a prototype and really quite strikingly different from that fairly recognizable
receiver bridge design with those quite complex long-range target sights. We have no sights over
this action at all, it's nice and smooth and we have slightly SMLE style sights in front of the
action but if anything they're even more basic than the SMLE. Now I don't know if that's because
of the stage of development that this thing is at, I believe this is technically a Patton 1912
by the way, there was a Patton 1911. We have six Patton 13 series rifles in total, we only have
two on the table. This one is serial number two which is quite exciting but the star of the show
really is a mash-up, so they didn't stick with this just nicking the Mauser action,
which incidentally is what the Americans did with the 1903 Springfield, they ended up with a hybrid
action between Enfield and Mauser. Although that's no slight to the Americans because
the basis for this was not a Mauser, it was the Patton 1903 Springfield, we have that on record.
So they copied this from the Springfield rifle that was copied from the Mauser. It's all getting
a bit incestuous here. So what do I mean by hybrid Enfield Mauser? Well this is the debate
over cocking on closing versus cocking on opening. What does that mean? Well this is debated back and
forth even today but the Enfield series of rifles were thought to be very quick to operate
because they would open very readily and then you would use your shoulder and your arm
to cock the rifle as you close it. So you've got to expend the energy somewhere as it were
but it was thought to be quicker and in my experience it is quicker to have a rifle that
cocks as you close the action. So it suddenly gets stiff as you press against the spring and then
the gun is cocked as you close it. Mauser works the other way around and cocks as you lift up the
which can, when the gun gets hot and dirty, slow it right down and the geometry of the Enfield was
set up for very rapid fire which was used to such great effect in the opening months of the First
World War. So despite the specification from a Mauser action what they ended up doing was a
Mauser bolt, this is almost identical to a Mauser bolt, with an Enfield cock on close system. So
it's got twin strong lugs up front just like a Mauser, the big long thick and powerful extractor
on the side of the bolt that's a feature of that design as well
but it cocks when you close it which was a feature that the Brits appreciated. The other thing,
the noteworthy thing and this carried through to the final P13, this one's very stiff by the way,
is this cranked bolt handle and the idea there is to put the handle just above the trigger
so for very quick action you're straight off the trigger onto the bolt handle and you're
pulling it up and pulling it back and it's going home you're not hunting for it somewhere else
it's nice and quick and again you see that carried through onto the actual pattern 1913.
And in fact apart from that apart from the sights which change which dictates the shape
of the receiver this is really quite close to the final P13. The cocking piece is also
on the prototype funnily enough it's more like an Enfield with a cocking piece you can manually cock
if it the gun doesn't fire you can manually re-cock it or if you need to decock it you can
hold it those of you who've shot Enfield will know why they have those cocking pieces. The
fully developed P13 has actually goes back to a conventional mouser shaped cocking piece
striker that sticks out the back here when you pull the trigger it flies forward into this
position. So quite an intriguing mixture of British and German
features although the specification required an SMLE nose cap that iconic look well as you can
see the actual rifles didn't have that they went for that Springfield style barrel sticking out
the end of the nose cap which actually did increase the overall length of the thing by a
they didn't quite meet their specification by any means but what they ended up with
was an extremely effective and accurate rifle. The other thing that that kind of went by the
wayside were the extra five rounds so well this one this one actually has no magazine
this being a prototype they hadn't got to the point of designing the magazine for this
but during the course of development it was decided that actually five rounds is perfectly
good enough and so we ended up with a mouser style magazine and a mouser style action with
that Enfield twist and of course being British we added long range volley sights so that you
shoot out to 2800 yards rather than using machine guns now I'm being facetious but that is a feature
that came and went until the 30s pretty much or second world war in fact another feature that was
kind of contested was with the finger grooves so the fully developed rifle I believe this
checking has been was either an early experiment or was added later on that's not quite clear
but on the troop trials rifles so there were 1251 troop trials rifles made so quite large scale
trials in the field those had these diagonal finger grooves which were not well liked and so
were removed so you will see pattern 13s in this collection and elsewhere with just smooth woodwork
with no grooves at all and then ultimately the decision was in favor of checkering and you'll
see that on early p14s as well which I'll come to in a moment of course if you are developing an
all-new rifle you need an all-new bayonet except the pattern 1913 bayonet and this one is thick
with grease preservative grease is not an all-new bayonet at all it's the exact same bayonet from
even with a throwback to the hooked quillon because this was originally a copy of the
Japanese Arasaka bayonet with the same blade profile and the same guard so there's a weird
throwback where they put this back on having already got rid of it quite early on on the SMLE
bayonet that gave rise to the obvious problem of people potentially trying to fit this bayonet to
the old rifle it wouldn't go because the end of the gun is completely different even if the
bayonet looks very very similar and that's why those of you who've come across pattern 1914 or
m1917 rifles their bayonets ended up with two grooves cut into the wooden grips so that people
wouldn't try and fit them to the end so if you've ever wondered and I'm sure you haven't why those
bayonets have grooves on them that's why but you know if it ain't broke don't fix it and this
bayonet was for a long time thought to be perfectly sufficient so I suppose the one of the
major improvements from the prototype p13 to what would have been the production p13 if things
hadn't gone awry as I'm about to explain is the sights so I mentioned the re-profiled body now
that only exists to elevate and protect the sights and also to provide charger guides for
five round clip loading as well but the primary reason for this distinctive shape is to house the
sights and those are excellent long range aperture sights where you pinch and slide
from a low position a low and closer distance to further distance in a very straightforward manner
really well engineered work really well very accurate and then folded down we still have a
larger battle aperture for close quarter or closer quarter work really excellent sights
really excellent rifle superbly accurate now unfortunately although work on the rifles
was going to give upon great guns the ammunition despite starting two years earlier the ammunition
project was in trouble although we had the American 30-06 cartridge around since 1906
funnily enough in that loading not enough time had passed for Britain to effectively replicate
something of that high pressure and high velocity and certainly not with a smaller bullet the whole
sort of internal ballistics of that was rather different so Britain just struggled to develop
the right propellants and ran into serious problems with heating
excessive muzzle flash and noise was reported from the trials
rifles barrels would wear out within a thousand rounds chambers and barrels would wear excessively
just from the high pressures I think we were probably having metallurgical problems with
barrels as well as just not ideal propellants to try and generate these high velocities
not super high velocity 2785 feet per second in old money as it were which isn't that much
higher than 30-06 but nonetheless Britain was having serious trouble with this now
not insurmountable by any means we were just perhaps a little bit behind the Americans
on that and I think probably we would have nailed it but for a little thing called the First World
War so pattern 1913 is a clue we'd adopted the rifle we were trying to perfect the ammunition
and then the First World War broke out what do you do well like many nations with small arms
programs on the way we parked it but not entirely this was a very sound rifle and we already tooled
up for it so we put it into service again as the pattern 1914 sorry into notion into service I mean
and then began to mass produce that rifle in 303 for the standard rimmed lower velocity about 2400
feet per second cartridge with the idea that it could start to replace the SMLE anyway
unfortunately getting a brand new rifle into production alone was a huge task and they ran
into all sorts of production issues with what we had no capacity so the Americans made them for us
three different companies that's a whole other story so the pattern 1914 does not come become
significant until the Second World War what is very significant though and is really the ultimate
legacy of the pattern 1913 is the US model of 1917 because more of those were in service with
the United States in the First World War than the Springfield that it was ultimately based upon
so very significant design and many of my peers and people I talked to agree that this
BM 1917 that is the 30-06 cartridge was the best infantry rifle of the First World War
it's quite a hard one to argue some of the best features of the Enfield all the best features of
the Mauser it's just a really fine rifle hey guys thank you very much for watching as ever and join
us again next time for another one of these I'm over on the GameSpot channel as well talking
nerdy stuff about guns and video gaming so there is also that do have a look at the description
we have links there to our website and you can check out our social media and the various other
things that we get up to over there and also if you care to we have links for donation and how
you can become a member and support the Royal Armoury that way but otherwise guys just carry
on watching with us we really appreciate it thanks a lot
