Small milestone for us. We start clearing trees to uncover the front gate. A small step for mankind, one giant leap for the Bates family. We have someone lined up to put in a driveway and clear a few acres for the shop pad, but that has been delayed due to the weather. In the meantime, we will chip away at what we can until the equipment arrives or until the dirt work contractor is caught up.
Due to the weather, the dirt work we contracted out for the driveway and shop pad has been delayed. So, we spent some time doing grunt work to shape the driveway and get a better visual of how it will look and where it will be. We got the tractor out to the property for the first time, which was exciting, to say the least. Tractor seat time is therapeutic. To help us clear our piles, I use a Woodland Mills WC68 6" PTO Wood Chipper, powered by the tractor PTO, and can handle material up to 6" in diameter. The chipper is rated for 20-50 PTO horsepower. My tractor has 30 horsepower at the PTO, so I won't be able to maximize the capability of this chipper, but it will allow for growing room if I get a larger tractor in the future. I haven't measured anything, but I believe I chipped a 5-6" diameter pine tree with it with no problems. I think I could chip 6" pine easily, but hardwoods are another story. You can audibly tell the ease of chipping pine vs the power demand of similar-sized hardwood. Considering we have 101 acres of trees, this will be a handy implement for the foreseeable future. Grease gun: https://amzn.to/3QKHU5x Email: [email protected]
This video was recorded exactly two weeks after closing on the land. We've had some equipment delays, land-clearing contractor delays, and weather delays. All in all, it's not bad progress. We've done so much since this video was shot. Much more progress is under way, but the weather this time of year is quite wet, causing a chaotic work/relax schedule. Email: [email protected]
We recently purchased 101 acres of land to homestead for our forever/generational property. At our last property in the city limits, we could stand on the road and see the entire property. With this much land, not so much. Seeing is knowing, and in this video, I share one thing we are doing so that we never lose sight of our survey line. When getting the land surveyed, we had some choices. Do you want the survey to mark just the corners? Do you want the survey to mark the corners plus any waypoints between the corners? How many waypoints? Do you want the line of sight marked as well? What distance interval is appropriate for marking? Any vegetation in the way? If so, you probably want a shorter interval. No vegetation and wide open spaces? You may not need any line of sight marked at all. We chose to have all perimeter waypoints marked with survey pins and the line of sight between the waypoints marked every 200' with a flag in the ground and an eye-level ribbon as close to each flag. The result was over 100 flags in the ground. The flags are great, but they are far from long-lasting. Our surveyor suggested we drive a T Post into the ground at each flag location for a longer-lasting boundary. Brilliant! We eventually want to permanently mark the perimeter with a 5-wire barbed wire fence, but understand that our plate is pretty full, and Rome wasn't built in a day. Driving posts at every flag will be a great way to protect our survey investment while getting a head start on the fence. We are also in the process of cutting a perimeter trail around the property so we can not only monitor the boundary, but also because it's a lot of fun to have many trail choices for recreation. Painting the posts with high-visibility orange marking paint will make these posts easy to spot through 20-30' of vegetation. And if we can easily see them, we can better monitor the entirety of our investment. Email: [email protected]
The first bit of land clearing on the new 101-acre property will be dedicated to working. The two acres will have three zones. On one end will be the shop. In the middle will be the outdoor working area where the tractor will have plenty of room to roam, and the sawmill will be located. On the other end will be the end of the processing process, so a burn area and a woodchip area. Of course, as time passes, the space will likely evolve into something different, but this is the initial concept for the space. In this video, I'm walking you through the rough land to document the space before any work is done and mark the perimeter of the space in preparation for an excavator to do the heavy work. Email: [email protected]
Day 31 since buying 101 acres. It's time for some tractor time. We planned our move around using pallet forks on a tractor to do most of the heavy lifting. With pallet forks and 101 acres of trees in mind, we knew a tractor loader would be getting a workout from us on the new property. Because of that, I chose a Bad Boy 4035 tractor due to it's loader lifting capacity of 2,200lbs. In this video I installed the SpeeCo quick hitch, a Piranha bar to the front bucket, and assemble and install the @woodlandmills WG24 stump grinder. I also chased a tire leak that I still can't find. Email: [email protected]
I tried digging with the stock loader bucket on the tractor and didn't get great results. It's possible, but starting is the hardest part with the stock bucket. I also wanted something that would "hold on" to the trees better so I could utilize hydraulics to remove the smaller stuff instead of a chainsaw, pole saw, and stump grinder. My research led me to the Piranha bar. The internet claims it's a "game changer" for a tractor loader bucket, so I bought one. Yup, it's a game-changer for sure. I've used it for around 10 hours now, and I'm really glad I bought it. Digging is really easy with it. Move it the same way you would use a normal shovel with your foot: push it down, wiggle it front to back, push it down again if needed, rotate the forward end up, and lift it. It's the same motion as a normal shovel. With the bar installed, starting a hole is incredibly easy. But the main reason I got it was for smaller trees. I've seen several videos of people using it to clear trees, and I thought it would be a good investment for our property. It was a GREAT investment. I've found that the smaller 1" or so saplings are easy to go low and drive forward, spearing or wedging the base of the trunk between two teeth, and just drive forward. For 2-4" diameter trees, I've found the best method is to start higher and use the bucket to lay the tree flat. This usually pops the roots up in front. Then, back up, level the bucket, spear the roots with the tooth bar, and drive forward. Once you have the bar piercing the roots, the forward movement of the entire tractor is much more effective at uprooting than the bucket's lifting and/or curling motion. For reference, this tractor is the Bad Boy 4035h, which has a loader lifting capacity of 2,200 lbs and a loader breakout force of 3,660 lbs. Email: [email protected]
We purchased 101 acres and want to monitor them all. One thing we are implementing is a perimeter trail, which means we have a lot of work to do. When done, this section of the perimeter trail will be around 3,100'. In this video, I covered most of the first 600'. I didn't cover much of the Piranha bar action, as I was just learning how to use it and didn't want to be distracted by constantly moving a camera. I'll show more of it in action later. Email: [email protected]
My last shop was a 30x40 shop with some outdoor working space on our less than 1-acre property. The new shop will be 40x60, with 2 acres dedicated to indoor and outdoor work on our 101-acre property. The surrounding few acres are also available if we need to expand. I hired someone to create a driveway and clear these 2 acres to speed things along. I'm a big fan of doing things myself and putting in the sweat equity, but let's be real here. Clearing this all alone would take months compared to a few working days with heavy equipment. These two acres will be cleared using a mini excavator and a dozer. On day one of clearing, only the excavator was used. A lot has happened since this video was shot, so stay tuned! Email: [email protected]
Yesterday, our dirt work guy had to stop due to rain. He started a large burn pile and knocked over a dozen or so large pines for me to cut up. So today, we're out here early to get as much of this cut as possible before more rain settles in. These pines were purposefully planted 35-ish years ago as an investment. I'm leaning more toward it being someone's personal investment, not a commercial operation. I say that because this pine stand wasn't managed as well as others I have seen. It looks to have had at least one thinning years ago, but the amount of natural regrowth between the pines leads me to believe nobody has managed this stand in the last decade or more. I'm not a forestry expert, so I could be completely wrong. However, it does leave me with a lot of material for personal use. At this point, the goal is to get at least three 10' logs out of each pine tree. I won't chase every little bit of material further up the tree. Unfortunately, we can't sell any of the pine logs. There isn't a market for it right now. Some people are having a hard time giving it away. Mississippi had a bad drought last year that killed a lot of pines. People were forced to sell off what they had before they fell and rotted away. That tanked the market. Currently, our local mill (30 minutes away) is only paying $35 per ton for pine logs. For the majority of people, that's not worth the time invested. Email: [email protected]
I ordered the W.R. Long RBG3 root rake grapple, and when I went to pick it up, the dealer noticed me looking at the Kioti KG4066 grapple. What caught my eye was the cylinders on the Kioti being in the back instead of on top, like the RBG3. The KG4066 had cylinder shields installed, and the metal was thicker. Both are made of AR400 steel, but the KG4066 steel is thicker. The KG4066 retails for about $600 more, and when I was offered the choice of either grapple for the same price, I chose the Kioti KG4066. I hope I made the right decision. So far I'm impressed with the grapple. The grapple is operated by my Bad Boy 4035h tractor, which I purchased mainly due to the 2,200lb loader capacity. I knew the loader would be used heavily (no pun intended) on the property for tasks just like this. Email: [email protected]
We continue the perimeter trail but on the north side this time. The eventual goal is to have a continuous trail along the entire perimeter of the property. This will help with security by keeping an eye on everything, but it will also be for recreation. We hope to have many miles of trails throughout the entire property for hiking, horseback riding, and driving with ATVs. The progress created in this video was accomplished in three days. On Day 49, we started at the end of the northbound trail near the adjacent field and cut west. On Day 50, we started at the same spot and cut east. I took Day 51 off to fix a hydraulic leak on the tractor. On Day 52, I started at the driveway and cut west to tie into the end point from Day 50. The walkthrough was recorded on Day 56. Email: [email protected]
Two and a half months ago, we sold our house and shop. Our belongings went into a shipping container to sit protected (hopefully) until the shop is built. A common concern is that shipping containers hold moisture and cause rust and mold issues. Well, I have no signs of mold, but I won't know for sure until it's time to unpack this puzzle. Hopefully, that will happen two months from now. But how are all of the cast iron surfaces holding up? Are they covered in a layer of orange powdery surface rust? Is my method of keeping rust at bay working? EDC flashlight. Amazon says I bough this on July 16, 2020. Considering I literally use it daily, I'd say it was a good purchase. - USB rechargeable flashlight: https://amzn.to/3VG5KSD Email: [email protected]
We bought 101 acres of woods, so we have and will have many stumps to address. In this video, I'm using the Woodland Mills WG24 Stump Grinder to grind a pair of stumps in the middle of our perimeter trail. The stump grinder has a 24" diameter grinding wheel containing 34 replaceable tungsten carbide teeth. Lower the 3pt to remove an inch or so of material when driving forward. On each pass, go deeper until you are a full 6" below the surface if necessary. If the bite is too much, you can notice the back of the grinder start to lean and/or the audible change of the tracker under too much load. When looking at the back of the grinder you will notice that it rotates in a clockwise direction. When cutting, it's important to do the majority of the cutting in the 6 o'clock to 9 o'clock quadrant, with minimal cutting in the 3 o'clock to 6 o'clock quadrant. Because the cutting teeth are traveling down in the 3-6 quadrant, a lot of the cutting energy will be wasted in the downward compression of the wood fibers rather than slicing them away. Too much downward cutting will cause the grinder to bounce around. For reference, I'm powering it with a Bad Boy 4035h tractor with a SpeeCo quick hitch attached. The WG24 is indeed quick hitch compatible. Special thanks to @woodlandmills #DiscoverTheWoodland #Woodlandmills #WoodlandMillsAmbassador Email: [email protected]
Electricity - Underground $14,899.81 - Above ground will be a lot less (estimated 4k) but trees come down. - Fiber internet will be ran at the same time Water plan - A) 4k-ish we go with city water - B) Well would be about 20k - Rainwater harvesting for sure eventually. Maybe up front.. 2 acre status - Delays: broken dozer and excavator - back to work now. Done at the time of publishing this video :) I've been working on trails - Perimeter trail is about 50% done - New trails everywhere - Rotary cutter and grapple are my favorite combo - Lane Shark incoming - No map sharing?? Maybe a raffle fund raiser to name the trails, thoughts? Fruit orchard - Slow process, long term goal - HUGE experiment, wood chips and ground cover - Back to Eden Documentary https://youtu.be/6rPPUmStKQ4?si=gcBcrtqk_yOX31Oz Shop notes - 40x60 red iron building with basic insulation - 12x60 leanto (16 or 20???) - One water in, one sewer out - Concrete inside, gravel under the lean Attack on my skin - Poison ivy at the start, my fault - Chiggers - Inadvertently burning with hot water for relief - Second round of poison ivy from rotary cutter + heat rash - Burns on my thigh from tractor time, need to buy canopy - Fire ants while cooking Something to look back on and laugh in a few years. Shop timeline - Our goal was always to be in the camper inside the new shop by winter. - As soon as we have septic and power we move. We are OK with bringing in water if the water is in portable tanks if the situation isn't figured out by then. Equipment - You need to buy a D4 dozer... - You need to buy a mini excavator... - You need to buy a skid steer... Why I went with a tractor - BUDGET!! - All other equipment is more costly and more costly to repair - Less expensive implements - Local tractor ecosystem via family for implement sharing, help, and repair knowledge. Big Business vs Big Life - Are you going to get 3 phase power? Why all the trails? Why do you want so much land? - I grew up outside as a kid. Boy Scouts, camping, outdoor sports (last generation before internet and screen addiction) - Spent the last two years camping a lot and re-kindled my love of the outdoors. I want this life. If not now, when? Zach's slide: “One year from now, your life could look completely different. Put in the work.” Brunt affiliate links (I use and recommend these products) Brunt long-sleeve summer work shirt: https://www.pntrs.com/t/8-12869-342731-289744?url=https%3A%2F%2Fbruntworkwear.com%2Fproducts%2Fthe-mckenna-long-sleeve-sun-shirt%3Fvariant%3D43514293813406 Brunt summer work pants: https://www.pntra.com/t/8-12869-342731-289744?url=https%3A%2F%2Fbruntworkwear.com%2Fproducts%2Fthe-costello-pant%3Fvariant%3D43396203413662 00:00 Intro 00:25 Electricity and Driveway 09:46 Pine Decision 10:36 Electricity Cost 14:52 Water 20:05 Two Acre Status 23:27 New Trails 46:23 Creek levels & More Trails 59:23 Fruit Orchard 1:01:22 Trail Map 1:03:38 The New Shop 1:09:03 Attack on my Skin 1:16:37 Equipment 1:21:42 Big Business vs Big Life
We currently have over 2 miles of trails, and when I complete my mapped-out trail system, we will have over 3 miles of trails. We are an outdoors family, and these trails provide recreation, relaxation, and transportation to access our entire property. With a lot of trails comes a lot of trail maintenance. The ground work is relatively easy; pull a cutter or blade. We want the above-ground work to be just as easy. To knock down the overgrowth from the sides and above, a pole saw was the tool of choice. While it's not incredibly difficult, doing it all day on miles of trails is not the exercise I look forward to. Insert the LaneShark LS3. This is a hydraulic-powered articulating rotary cutter that attaches to the loader of a tractor. I have a BadBoy 4035H tractor, which calls for the LS3 model from LaneShark. While using it in the centered horizontal position is effective for a more targeted approach to rotary cutting operations, that's not where it shines. The most common use for this implement is to have it offset to the right and in the vertical orientation. This allows the operator to use the bucket lift and bucket curl to make targeted cuts high above the ground (about 12' with my setup) to address those overgrown branches and vegetation that will eventually take over the trail from the side and from above. If you'd like to know more about LaneShark and the LS3 click the following link: https://bit.ly/45VAC58 Email: [email protected]
What a day! Sun up to sun down, it was a busy day. And man, did I sleep well that night! Those are the good days. The days that end with you being in the shower and looking down at all the dirt run off of your body. Evidence of hard work washing away. We cleared 2 acres on our forever property and, unfortunately, we need to burn most of it. We are rushing this process a bit so because we are already a month behind schedule on the new shop built. If we want to move in before winter, we must push forward. The burn pile is 300' long and contains mostly smaller trees and brush from our pine stand. We didn't have the time or weather cooperation to salvage all of the larger trees, so some of them had to go into the pile. Not all is lost, though; I'll talk more about this in the next video. Every location has a different set of rules and regulations (freedom restrictions). In our area, it is recommended that you call the sheriff's office before a controlled burn like this. That way, if people call because they see a fire in the woods, the sheriff's office can let them know that it is a controlled burn. Regarding fire containment, the 300' pile is in the middle of a 200' x 400' clearing with no vegetation on the ground surrounding the pile. That provides a fire break to mitigate spread. Our only concern was hot embers floating away from the pile and starting another fire elsewhere. For that reason, we waited until an hour before dark to start the fire. This lets the dew start to set in and allows us to better see the hot embers as they fly away. Luckily, no other fires were started. In the event that another fire was started, we had multiple people watching the woods, 250 gallons of water, and a leaf blower. A leaf blower can be a great tool to stop the spread of a small fire if used correctly. Similar to blowing out a candle, blow the flames and hot embers from the fuel side into the already burnt side. Email: [email protected]
The past two weeks have been a blur. We burned the 300' brush pile, and the following day, it rained. It rained HARD. Enough to put out all of our hot embers that we planned on piling on top of for the next few days. Zero chance of rain, my butt!! It wasn't supposed to rain for four days after the fire. I suppose it's a blessing in disguise, though, as we can now salvage most of the larger trees without all the brush in our way. A family friend is taking the logs to the local sawmill, and I'm putting a lot of hours on the tractor moving and pushing and sorting and cutting and moving and moving and moving stuff. This is the first phase of the adventure where I drastically underestimated the time involved. Before the fire, we were about a month behind schedule. I think we're about a month and a week behind schedule now. But then again, how can someone accurately predict a six-month schedule when the weather is so unpredictable? To say that I'm learning a lot along the way is a drastic understatement. I've learned more in the past few months than I have in the past few years. Crash course in this adventure we call life! Email: [email protected]
A friend let me borrow his box blade to use on the property. The Cat 1 pins were in rough shape, bent and broken. When you borrow something, it's best to return it in better condition. The $20 I spent on new pins is well worth the time and wear and tear I put on the box blade. The tractor has to go in for warranty repair due to a strangely implemented hydraulic fitting supplying the power steering that is strangely not serviceable. I contacted the manufacturer to get a part number for the fitting and was told a part number for that fitting doesn't exist. Replacing the entire power steering hydraulic cylinder assembly is the solution. I'll keep you updated.. Electric changes were approved and are paid for. I'm waiting for when they will start. I hope to get a notification so I can run out there and record. The water meter has been paid for and I'm just waiting for them to get started as well. I hope to record some of it. Afterward, I'll trench 1300' of 2" pipe to the clearing. Ultimately, I want a well drilled, but financially, it's not in the cards at the moment. I'd like to use the city-supplied water to drill a few shallow wells on the property and have that tested to determine how we can use it. I met with the septic installer and was told I needed to jump through more hoops to get the Mississippi Department of Health involved by having them do a perc test so they can tell me what the professional septic installers have already told me. Yay! More government overreach! Side by side mirror: https://amzn.to/3yAZ0Na Email: [email protected]




















