I contract a Corinthian-style helmet from silicon bronze. I make this helmet in 2 pieces, which are welded together with a tig welder using a silicon bronze filler rod. The traditional Corinthian helmets were made from a single piece of bronze. The method used to do this is currently a hotly debated topic among historians. Some feel they were raised from a sheet of bronze. Others propose they were cast to a partially finished helmet then custom hammered to final shape. My personal hunch is the 3rd hypothesis in that they were hot dished from a block or thick disk. I plan to experiment with this method in future videos.
I make a crest for my bronze Corinthian style, hoplite helmet. The crest is constructed from two pieces of silicon bronze which are shaped over a steel form. These pieces are then embossed with decorative relief. For this, I chose the iconic Minian bull from a fresco found in a palace in Crete from about 1700BCE. 1000 years too early for the time period of our helmet, but perhaps classical greeks were inspired by their prehistory as we are today. In any event, the relief was made using the repousse technique, utilizing pitch as a backer. The two ""mirror opposite"" panels were then welded together and bolted to the top of the helmet. The crest was then partially filled with black silicone caulking and tufts of horsehair were inserted into this to create the finished look.


