Circuit breakers allow the flow of energy to be controlled by safely switching currents on and off at all voltage levels of the energy grid. The interrupter and the mechanical drive are the main components that are subject to wear and aging. In order to ensure the proper operation of a circuit breaker throughout its lifetime, diagnostic tests are performed, such as resistance, timing, minimum pick-up, travel, and power factor. ☝️ Learn more about CIBANO 500 on our website: https://www.omicronenergy.com/products/cibano-500/ ▶️Interested in circuit breaker testing? – Watch all of our circuit breaker videos: https://youtube.com/playlist?list=PLzmbZeI1bhu-yEI1tCcZtYM8AIhX-Zh47 _ Would you like to find out more about OMICRON, our passions, and our products? 🌐Check out our website: https://www.omicronenergy.com/en Or follow us on social media: 👉On LinkedIn: https://www.linkedin.com/company/omicron-electronics 👉On our podcast Energy Talks: https://www.omicronenergy.com/en/energy-talks-podcast/ 👉On YouTube: https://www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ
CIBANO 500 combines a micro-ohmmeter, timing analyzer, and a coil and motor supply. All important CB tests on all types of CBs can be carried out even when a station battery is not available. Its globally unique connection technology reduces the wiring effort and time required up to 50 %. In addition, OMICRON's Primary Test Manager™(PTM)-Software and the included circuit breaker testing library (CBTL) ensure convenient operation and deliver one clear, combined report for all the tests performed. ☝️ Learn more about CIBANO 500 on our website: https://www.omicronenergy.com/en/products/cibano-500/ ▶️Interested in Switchgear Testing? – Watch all of our videos: https://youtube.com/playlist?list=PLzmbZeI1bhu-yEI1tCcZtYM8AIhX-Zh47 _ Would you like to find out more about OMICRON, our passions, and our products? 🌐Check out our website: https://www.omicronenergy.com/en Or follow us on social media 👉On LinkedIn: https://www.linkedin.com/company/omicron-electronics/ 👉On our podcast Energy Talks: https://www.omicronenergy.com/en/energy-talks-podcast/ 👉On YouTube: https://www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ
Testing circuit breakers is essential to ensure safe electricity supply, safe handling of network faults and safety for the utility's personnel. OMICRON's CIBANO 500 is the first 3-in-1 test system, which combines all the equipment that is needed for circuit breaker testing in one device: a micro-ohmmeter, a multi-channel timing unit, and a controllable DC supply to power drive motors and trip and close coils. All standard tests on medium- and high-voltage circuit breakers can be performed efficiently and safely with this lightweight device (20 kg / 44.1 lbs). More Information about CIBANO 500 on our website: https://www.omicronenergy.com/en/products/cibano-500/ Interested in circuit breaker testing? – Watch all of our circuit breaker videos: https://www.youtube.com/playlist?list=PLzmbZeI1bhu-yEI1tCcZtYM8AIhX-Zh47
Voltage-Based-Timing measurement, or VTM, indicates that the voltage of a medium voltage switchgear in service is used to detect the state of the main contacts. The easiest way to do this is to use the Voltage Detection System, or VDS, of the switchgear. In this video, Andreas Nenning, OMICRON product manager of the CIBANO 500, shows how this is done: 00:00 - Introduction 01:16 - How to connect to the VDS interface with the circuit breaker test set 02:54 - How to accurately measure the states of the main contacts 03:49 - How to record the voltages of the primary conductors and how to get the calculated operation times. ☝️ Learn more about CIBANO 500 on our website: http://www.omicronenergy.com/cibano500 ▶️Interested in Switchgear Testing? – Watch all of our videos: https://youtube.com/playlist?list=PLzmbZeI1bhu-yEI1tCcZtYM8AIhX-Zh47 _ Would you like to find out more about OMICRON, our passions, and our products? 🌐Check out our website: https://www.omicronenergy.com/en Or follow us on social media 👉On LinkedIn: https://www.linkedin.com/company/omicron-electronics/ 👉On our podcast Energy Talks: https://www.omicronenergy.com/en/energy-talks-podcast/ 👉On YouTube: https://www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ
This video shows a test of a 220 kV circuit breaker, which has four interrupters per phase and independent mechanisms, making it rather complex to test. Nevertheless, the used test equipment allows testing it in one go. After explaining the single components of the test system, the video shows in detail how to set it up. Then all common tests are performed without any rewiring, including motor current, timing tests, motion measurements, contact resistance test, dynamic contact resistance test, and minimum pickup test. ☝️ Learn more about CIBANO 500 on our website: https://www.omicronenergy.com/cibano500 ▶️Interested in Switchgear Testing? – Watch all of our videos: https://youtube.com/playlist?list=PLzmbZeI1bhu-yEI1tCcZtYM8AIhX-Zh47 _ Would you like to find out more about OMICRON, our passions, and our products? 🌐Check out our website: https://www.omicronenergy.com/en Or follow us on social media 👉On LinkedIn: https://www.linkedin.com/company/omicron-electronics/ 👉On our podcast Energy Talks: https://www.omicronenergy.com/en/energy-talks-podcast/ 👉On YouTube: https://www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ
This video shows how to perform a circuit breaker motion measurement on a GL 312 breaker using the CIBANO 500 and some accessories, such as a digital rotary transducer. The video was recorded at GE Technical Institute Kassel, Germany. ☝️ Learn more about CIBANO 500 on our website: https://www.omicronenergy.com/en/products/cibano-500/ ☝️ Learn more about Switchgear Testing on our website: https://www.omicronenergy.com/en/switchgear-testing/ ▶️Interested in Switchgear Testing? – Watch all of our videos: https://youtube.com/playlist?list=PLzmbZeI1bhu-yEI1tCcZtYM8AIhX-Zh47 _ Would you like to find out more about OMICRON, our passions, and our products? 🌐Check out our website: https://www.omicronenergy.com/en Or follow us on social media 👉On LinkedIn: https://www.linkedin.com/company/omicron-electronics/ 👉On our podcast Energy Talks: https://www.omicronenergy.com/en/energy-talks-podcast/ 👉On YouTube: https://www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ
This videos shows how to perform a circuit breaker motion measurement on a HYpact 145 breaker using the CIBANO 500 and some accessories, such as the linear live tank transducer 250. The video was recorded at GE Technical Institute Kassel, Germany. ☝️ Learn more about CIBANO 500 on our website: https://www.omicronenergy.com/en/products/cibano-500/ ☝️ Learn more about Switchgear Testing on our website: https://www.omicronenergy.com/en/switchgear-testing/ ▶️Interested in Switchgear Testing? – Watch all of our videos: https://youtube.com/playlist?list=PLzmbZeI1bhu-yEI1tCcZtYM8AIhX-Zh47, _ Would you like to find out more about OMICRON, our passions, and our products? 🌐Check out our website: https://www.omicronenergy.com/en Or follow us on social media 👉On LinkedIn: https://www.linkedin.com/company/omicron-electronics/ 👉On our podcast Energy Talks: https://www.omicronenergy.com/en/energy-talks-podcast/ 👉On YouTube: https://www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ
This videos shows how to perform a circuit breaker motion measurement on a B65-145 GIS using the CIBANO 500 and some accessories, such as a digital rotary transducer. The video was recorded at GE Technical Institute Kassel, Germany. ☝️ Learn more about CIBANO 500 on our website: https://www.omicronenergy.com/en/products/cibano-500/ ☝️ Learn more about Switchgear Testing on our website: https://www.omicronenergy.com/en/switchgear-testing/ ▶️Interested in Switchgear Testing? – Watch all of our videos: https://youtube.com/playlist?list=PLzmbZeI1bhu-yEI1tCcZtYM8AIhX-Zh47, _ Would you like to find out more about OMICRON, our passions, and our products? 🌐Check out our website: https://www.omicronenergy.com/en Or follow us on social media 👉On LinkedIn: https://www.linkedin.com/company/omicron-electronics/ 👉On our podcast Energy Talks: https://www.omicronenergy.com/en/energy-talks-podcast/ 👉On YouTube: https://www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ
This video shows how to perform a circuit breaker motion measurement on a GL 313 using the CIBANO 500 and some accessories, such as a digital rotary transducer. The video was recorded at GE Technical Institute Kassel, Germany. ☝️ Learn more about CIBANO 500 on our website: https://www.omicronenergy.com/en/products/cibano-500/ ☝️ Learn more about Switchgear Testing on our website: https://www.omicronenergy.com/en/switchgear-testing/ ▶️Interested in Switchgear Testing? – Watch all of our videos: https://youtube.com/playlist?list=PLzmbZeI1bhu-yEI1tCcZtYM8AIhX-Zh47, _ Would you like to find out more about OMICRON, our passions, and our products? 🌐Check out our website: https://www.omicronenergy.com/en Or follow us on social media 👉On LinkedIn: https://www.linkedin.com/company/omicron-electronics/ 👉On our podcast Energy Talks: https://www.omicronenergy.com/en/energy-talks-podcast/ 👉On YouTube: https://www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ
This video shows how to perform a circuit breaker motion measurement on a GL 316 using the CIBANO 500 and some accessories, such as a digital rotary transducer. The video was recorded at GE Technical Institute Kassel, Germany. ☝️ Learn more about CIBANO 500 on our website: https://www.omicronenergy.com/en/products/cibano-500/ ☝️ Learn more about Switchgear Testing on our website: https://www.omicronenergy.com/en/switchgear-testing/ ▶️Interested in Switchgear Testing? – Watch all of our videos: https://youtube.com/playlist?list=PLzmbZeI1bhu-yEI1tCcZtYM8AIhX-Zh47, _ Would you like to find out more about OMICRON, our passions, and our products? 🌐Check out our website: https://www.omicronenergy.com/en Or follow us on social media 👉On LinkedIn: https://www.linkedin.com/company/omicron-electronics/ 👉On our podcast Energy Talks: https://www.omicronenergy.com/en/energy-talks-podcast/ 👉On YouTube: https://www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ
Andreas Nenning of OMICRON shows a new method for testing the timing of a circuit breaker within a gas-insulated switchgear (GIS). Using this measurement method, both sides of the breaker remain grounded throughout the test. Learn more about CIBANO 500 on our website: https://www.omicronenergy.com/en/products/cibano-500/ Interested in Switchgear Testing? – Watch all of our videos: https://youtube.com/playlist?list=PLzmbZeI1bhu-yEI1tCcZtYM8AIhX-Zh47,
Testing high-voltage circuit breakers presents a different set of challenges, such as several interrupters per phase and long distances between drive cabinet and main contacts. The combination of CIBAN0 500 and the main contact modules CB MC2 allows all tests on a circuit breaker to be performed with one test setup. Once they're set up, these simple and clear test connections do not require any changes throughout all of the tests (static and dynamic contact resistance, timing, under-voltage condition and minimum pick-up, as well as coil/motor current analysis). Using the CB TN3 accessory and a motion sensor, motion/contact travel tests can also be performed. More Information about CIBANO 500 on our website: https://www.omicronenergy.com/en/products/cibano-500/, Interested in circuit breaker testing? – Watch all of our circuit breaker videos: https://youtube.com/playlist?list=PLzmbZeI1bhu-yEI1tCcZtYM8AIhX-Zh47
The electric power industry needs to measure extremely small resistances in the range of milli- or micro ohms. For instance, this needs to be done when measuring contact resistance in circuit breakers or disconnectors, or when measuring the resistance of joints, such as those used in bus bars or very low winding resistance. Measuring resistances as small as these requires what is called a four-wire measurement. Learn more about CIBANO 500 on our website: https://www.omicronenergy.com/en/products/cibano-500/ Interested in circuit breaker testing? – Watch all of our circuit breaker movies: https://www.youtube.com/playlist?list=PLzmbZeI1bhu-yEI1tCcZtYM8AIhX-Zh47
The compactness of a gas insulated switchgear, or GIS, provides a lot of advantages but it also challenges the insulation between the high voltage parts and its surrounding. Thus, high voltage tests are carried out on GIS prior to switching them onto the grid. For testing at mains frequency, large and heavy test transformers are needed. A more lightweight and smaller alternative is a test system which uses resonance frequency. Watch how the High Voltage Resonance Test System from OMICRON, with the CPC 100 and the CP RC2, is used to prove the dielectric integrity of a GIS with a rated voltage of 123 kV during a high potential test (HIPOT test). ☝️ Learn more about CPC 100 on our website: https://www.omicronenergy.com/en/products/cpc-100/ ☝️ Learn more about test systems on our website: https://www.omicronenergy.com/en/products/cp-rc/ ▶️Interested in Testing Primary Assets? – Watch all of our videos: https://youtube.com/playlist?list=PL5F0FD9968998E6E7 _ Would you like to find out more about OMICRON, our passions, and our products? 🌐Check out our website: https://www.omicronenergy.com/en Or follow us on social media 👉On LinkedIn: https://www.linkedin.com/company/omicron-electronics/ 👉On our podcast Energy Talks: https://www.omicronenergy.com/en/energy-talks-podcast/ 👉On YouTube: https://www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ
In this video series, Andreas Nenning shows the new CIBANO 500 MV package features of the Primary Test Manager (PTM) 4.70 using several medium voltage circuit breakers, such as ABB VD4, ABB SafePlus and ABB SACE. In this episode, Andreas shows how to test GIS MV breakers such as the ABB SafePlus AirPlus with WEGA Interface, running a comprehensive test program, including the measurement of the motor current signature, Off Service Timing (C, O), Minimum Pickup, Contact Resistance and In Service Timing (Voltage-based Timing Measurement – VTM), with a special focus on the latter. ☝️ Learn more about CIBANO 500 on our website: https://www.omicronenergy.com/en/products/cibano-500/ ▶️Interested in Switchgear Testing? – Watch all of our videos: https://youtube.com/playlist?list=PLzmbZeI1bhu-yEI1tCcZtYM8AIhX-Zh47 _ Would you like to find out more about OMICRON, our passions, and our products? 🌐Check out our website: https://www.omicronenergy.com/en Or follow us on social media 👉On LinkedIn: https://www.linkedin.com/company/omicron-electronics/ 👉On our podcast Energy Talks: https://www.omicronenergy.com/en/energy-talks-podcast/ 👉On YouTube: https://www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ
In this video series, Andreas Nenning shows the new CIBANO 500 MV package features of the Primary Test Manager (PTM) 4.70 using several medium voltage circuit breakers, such as ABB VD4, ABB SafePlus and ABB SACE. In this episode, Andreas shows how to test MV breakers such as the ABB VD4, running a comprehensive test program including the measurement of the motor current signature, Off Service Timing (C, O, CO, O-CO), Minimum Pickup, Contact Resistance and Overcurrent Release, with a special focus on the latter. ☝️ Learn more about CIBANO 500 on our website: https://www.omicronenergy.com/en/products/cibano-500/ ▶️Interested in Switchgear Testing? – Watch all of our videos: https://youtube.com/playlist?list=PLzmbZeI1bhu-yEI1tCcZtYM8AIhX-Zh47 _ Would you like to find out more about OMICRON, our passions, and our products? 🌐Check out our website: https://www.omicronenergy.com/en Or follow us on social media 👉On LinkedIn: https://www.linkedin.com/company/omicron-electronics/ 👉On our podcast Energy Talks: https://www.omicronenergy.com/en/energy-talks-podcast/ 👉On YouTube: https://www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ
In this video series, Andreas Nenning shows the new CIBANO 500 MV package features of the Primary Test Manager (PTM) 4.70 using several medium voltage circuit breakers, such as ABB VD4, ABB SafePlus and ABB SACE. In this episode, Andreas shows how to test MV breakers such as the ABB SACE, running a comprehensive test program including the measurement of the motor current signature, Timing (C, O, O-CO, CO, CO-CO), Minimum Pickup, Contact Resistance and Under-voltage Release with SF6 control and blocking mechanism, with a special focus on the latter. ☝️ Learn more about CIBANO 500 on our website: https://www.omicronenergy.com/en/products/cibano-500/ ▶️Interested in Switchgear Testing? – Watch all of our videos: https://youtube.com/playlist?list=PLzmbZeI1bhu-yEI1tCcZtYM8AIhX-Zh47 _ Would you like to find out more about OMICRON, our passions, and our products? 🌐Check out our website: https://www.omicronenergy.com/en Or follow us on social media 👉On LinkedIn: https://www.linkedin.com/company/omicron-electronics/ 👉On our podcast Energy Talks: https://www.omicronenergy.com/en/energy-talks-podcast/ 👉On YouTube: https://www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ
The #OMICRON CIBANO 500 circuit breaker test set offers advanced testing methods for high and medium voltage circuit breakers. The test device can make use of its internal power supply, timing meter and µOhm meter in order to perform a number of tests on circuit breakers. Routine tests on circuit breakers will typically include timing and contact resistance measurements. Fingerprinting through dynamic resistance measurements combined with measuring motion and motor current curves, allow deterioration trends to be discovered. Ideally, circuit breaker tests should also include the testing of any special functions of a circuit breaker, such as the detection of overvoltage and undervoltage conditions, or the measurement of the minimum voltage necessary to trip and close the breaker (Minimum pick-up test). CIBANO 500 allows users to test all of these functions with a single device. This video shows how medium voltage circuit breakers can comprehensively be tested with CIBANO 500. ☝️ Learn more about CIBANO 500 on our website: https://www.omicronenergy.com/en/products/cibano-500/ ☝️ Learn more about Offline Air-Insulated Switchgear Testing on our website: https://www.omicronenergy.com/en/application/offline-testing/air-insulated-switchgear-ais-testing/ ▶️Interested in Switchgear Testing? – Watch all of our videos: https://youtube.com/playlist?list=PLzmbZeI1bhu-yEI1tCcZtYM8AIhX-Zh47 _ Would you like to find out more about OMICRON, our passions, and our products? 🌐Check out our website: https://www.omicronenergy.com/en Or follow us on social media 👉On LinkedIn: https://www.linkedin.com/company/omicron-electronics/ 👉On our podcast Energy Talks: https://www.omicronenergy.com/en/energy-talks-podcast/ 👉On YouTube: https://www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ #CIBANO500 #CircuitBreaker #CIBANO500 #Breaker #MediumVoltage
Energy transmission uses high voltage levels in order to transfer energy over long distances with minimum losses. In substations, the high voltage levels are transformed to medium and low voltage levels for distribution. The corresponding medium- and low-voltage power grids are highly interconnected, and thus require many circuit breakers in order to make or break any required connections. However, the most important task of circuit breakers is probably breaking a fault current. Breaking high fault currents that are many times the rated current within a fraction of a second requires breakers to be in perfect condition. Thus, they must be regularly tested in order to make sure that they work when it really counts. Routine tests will typically include timing and contact resistance measurements. Additional tests allow a more comprehensive condition assessment of all breaker parts. These can include motor current, dynamic contact resistance, and contact travel. Test devices with an inbuilt power supply can even test breakers in undervoltage conditions and find the minimum voltages necessary for trip, close, and undervoltage coils. All of these tests combined reveal important information about the planning and execution of timely breaker maintenance. Condition-based maintenance can help preventing breaker malfunction, prolong breaker lifetime, and minimize unplanned outages; for a safe and reliable supply of electric power for everyone. ☝️ Learn more about Offline Air-Insulated Switchgear Testing on our website: https://www.omicronenergy.com/en/application/offline-testing/air-insulated-switchgear-ais-testing/ ▶️Interested in Switchgear Testing? – Watch all of our videos: https://youtube.com/playlist?list=PLzmbZeI1bhu-yEI1tCcZtYM8AIhX-Zh47 _ Would you like to find out more about OMICRON, our passions, and our products? 🌐Check out our website: https://www.omicronenergy.com/en Or follow us on social media 👉On LinkedIn: https://www.linkedin.com/company/omicron-electronics/ 👉On our podcast Energy Talks: https://www.omicronenergy.com/en/energy-talks-podcast/ 👉On YouTube: https://www.youtube.com/channel/UC2F35zz5XMoi1vbXrMgEyGQ
A station's switching apparatus and its connections have to handle load currents in the range of hundreds or thousands of amps. Low resistance values at all connection points - circuit breaker and disconnector contacts as well as any joint - assure low power dissipation. Keeping the equipment's temperature within its specifications is a precondition for normal and correct operation over its expected lifetime. The low contact resistance of circuit breakers and disconnector switches as well as any joints can be confirmed by micro resistance measurement. More Information about CPC 100 on our website: https://www.omicronenergy.com/en/products/cpc-100/ Interested in Circuit Breaker testing with CPC 100? – Watch more videos: https://www.youtube.com/playlist?list=PL5F0FD9968998E6E7




















