LanAnhHandmade

https://video1-ap-japan.cloudokyo.cloud/video/v12/bf/b6/42/bfb642b2-e76c-4f8c-a948-9cae4aa080b5/master.m3u8

#bracelet #Howtomake #Tutorial #LanAnhHandmade #Copperwire
You can turn on subtitles by clicking the CC icon at the bottom of a YouTube video

* The parameters I give are for reference only. The size and length of the wire used can be flexibly changed depending on the size of the size of the bracelet or wire you have.
  
Main wire : can use wire with diameter from 0.8 - 1.1mm ( 20 gauge - 17 gauge ) 
 Length = circumference x 4, 6 or 8 (If you want a larger bracelet or more harder , use more wire)
Bending wire : Can use wire with diameter from 0.7 - 0.9mm ( 21 gauge - 19 gauge ) and from 0.4 - 0.6mm ( 26 gauge - 22 gauge ) 
Length = bracelet circumference x 3 (2 wire should be 2-3 sizes apart for effect)


* In the video I use :
18 gauge ( wire diameter 1mm ) : 100cm ( 40 inch)
20 gauge ( wire diameter 0.8mm ) : 50cm ( 20 inch)
24 gauge ( wire diameter 0.5mm ) : 50cm ( 20 inch)

Use anvil and hammer smack lightly keep the wires in place.
Split 2 wire to create effects

* The same technique but can be changed by adding stone beads or changing the bending wire you have given different products.

* You can add clasp to increase the product's durability.

* If the bracelet you made is missing the length, you can add chain to achieve the desired length.

* You can apply the same way to make rings or earcuffs.

Basic operations included in the basic tutorial rb.gy/6xecxw


* Music in the video :
00'08 - 03'37 : Before I Go - RKVC
03'37 - 06'07 : Beseeched - Asher Fulero
06'07 - 09'15 : Chords of Harmony - Aakash Gandhi


Timestamp
00:00 Preview, Materials and Tools
00:29 Bending main wire
02:52 Bending sea wave pattern
06:37 Finish and adjusted 
08:12 Reviews

Ocean Waves | with and without stone bead | thick bangle | cuff bracelet 782

LanAnhHandmade