Will the real ELEANOR please start up - Factory Tour

Supercar Advocates
4 followers
5 Video Views·Oct 28, 2022
Go baby go. So this is a V8 right? 5 litre V8. So 430 horsepower. Beautiful.
Look at that front hood just in front of you. It's just bulging out.
The way the car sounds sensational.
We're here at the Fusion Motor Company and what they do is they're the official licensed.
I mean what they are is exclusive licensed. The official manufacturer.
The exclusive manufacturer.
Oh we're here at the Fusion Motor Company and what they are is.
Gil over to you. The exclusive manufacturer for the officially licensed
Gondon 62nd Ellen Horse. Boy was that hard to get out at this point.
But you got it. Well Gil's going to show us around every process because they make these
cars. They're going to show us how it's done. So we're out here in the yard and what you're
really looking at here are the donor vehicles. You have a 67 or a 68 Fastback Mustang. All of
the Ellen Horses that we build start with either a 67 or a 68 with a proper VIN so they can be
properly titled as a 67 or 68 Fastback Mustang. You can see that they come in in different
conditions and variations. There's one here. One here. One there. Over here some. You can
see over here there's more of them here. All kinds of different degrees of restoration required for
them and different amounts of bodywork and metalwork. But as you'll see as we go through
the process, the finished product is simply a piece of art and not really anything like this.
So a customer comes in here to this yard and they can select, hand-pick whichever
donor car they want. Correct. And a car like this that's completely basically,
I don't know, looks like it's... Looks like we pulled it out from the bottom of a swamp.
And you guys make, like give this a biggest makeover to look like something we're going to
see later. Correct. But this is a pure example of what it looks like. So there's a lot of work
involved in this. How many man-hours all up roughly from start to finish? We spend approximately
3,000 man-hours turning it to, giving birth to Eleanor as I like to say. So starts something
like this and again the finished product is truly unbelievable and it's the sum of many,
many hours and talent and dedication from the team inside. And you say there's about 18 months
to 24 month wait? 18 to 24 month wait time on these. That's the current runway. Wow.
All right, let's check out the first stage in our prep. First stage, we're going to go inside
So before the cars come here into the metal shop, the cars go out for media blasting and that's
really what allows us to really understand where the areas of focus are going to be in terms of
metal work and what needs to be repaired. So as you can see in a car like this,
this particular example, you can see the floor plans have been completely replaced.
The fenders have been completely replaced. So once the car comes out of media blasting,
we can see all the areas of correction necessary, right? So a bunch of metal work goes into this.
You can see that we changed the tunnel so we can fit either our five-speed or six-speed
transmission. If you look inside here, you can also see this particular car
has the mini-tubbing option so we can fit a larger tire on the rear. So you guys re-weld all this?
Correct. And this particular car has actually advanced already to the fitting stages. You can
see that the ELEANOR panels have already been installed or they're here for fitment process.
So these are all the ELEANOR panels? So they're all carbon fiber?
Correct. The ELEANOR panels are made out of carbon fiber in-house. We have a full carbon
fiber capability. So these are made out of carbon fiber and I can show you that in the
rear decklid as well. But as you look in here, you can see that this car has been completely
reinforced. We removed the shock tower so we can fit the larger engines.
You can see all the work and the metal work that takes place in this vehicle.
And do you give it a new chassis number, VIN number?
So the VIN number stays original, which is why it's important for us to find a donor that has
a correct VIN because this makes it a lot easier to get registered. The title is not
titled as a kit car or a special construction car. It's actually a 67 or 68 Fastback Mustang.
So when we're applying to out of the country, that's something that's very important.
And like in Australia where we can't really drive left-hand drive cars until they're a certain age,
now with this, this has all been original, original donor car, we can import this car
as a left-hand drive car and keep it original, which is something that I'm thinking of maybe
doing. I'm not sure yet, but have you sold one to Australia yet? Because you're the only official
license producer in the whole world. So when we actually go into the body shop,
I'm going to show you actually a right-hand drive conversion that is destined for Australia.
Yeah. Well, we actually went through the whole process of relocating everything to the right
side. And I will show you that in the body shop. I didn't try to surprise you, but you know,
jump the gun there. Again, it's another example of it. You can see, again, all the work that we
do. This is a completely new replacement piece by us to increase the strength and the rigidity
of the front end. So all of that is done in-house by our metal workers. All of that is custom. So
again, just different, different things to make sure that the car. And you guys use custom hinges
here too? Correct. Custom billet hinges. The other thing you can see is this, and I'll show
it to you also in the finished product, but you can see here that on the firewall, those vents
have been opened up on top. Correct. Those are opened up in an original 67 or 68. Those are
actually completely shut. We do that in order to expel hot heat from, from the engine, obviously
keep the engine. Correct. We'd like to think that we made some improvements to ensure the
drivability and the user-friendliness of the vehicle. Okay. So how many have you built so far
from start to finish? So we're currently sold through number 21 and we're working on delivering
number 14 at the moment. Okay. And how long have you guys been building these? We've been building
these for the last about, about four and a half years. Okay. Oh, very, very special cars. Yeah.
Couple of other things to note is, you know, we spend, we spend a lot of time here on this rear
end piece. We custom made by hand this metal tail piece so that there isn't a seam. Yeah,
I've noticed aftermarket Eleanor's have a seam. Correct. They have a seam. A lot of them are made
out of a one piece. The whole tail is one piece fiberglass where ours is made out of metal. No,
no, no seam, which obviously allows us to avoid shrinkage and potential cracking down, down the
line. Right. And the movie car, is that seamless? That's a good question. I believe the movie car
actually has a seam. I'm not 100% sure on that. And you know, you can see here also the bumper,
we use metal bumpers, the original bumpers shortened and tucked. So it's the correct,
correct original metal bumpers. Again, there's other products out there that use fiberglass.
Okay. Now it's cool seeing them in this state. So watching every stage and say as a customer,
if I wanted to purchase one, would I get pictures and updates at different stages or portfolio?
Absolutely. And I'll actually show you a finished product as well. So as a customer,
so first and foremost, it's an open door policy. You are welcome to be here and be part of the
process and see the car go through the different stages. We work very closely with you to make
sure that the color is the way you want it. You have interior options, engine option,
transmission options, suspension options, a lot of different options. So we actually create a
build sheet for you and you will get that at the end as a form of a window sticker.
Okay. And you get a certificate as well. And we also provide a full hardbound build book
that has pictures from start to finish of your specific vehicle. It includes a dyno sheet on
your engine. It includes a lot of information unique to your exact car. So every car has its
individually built engine as well. Correct. The engines, we use Roush engines. So we partner with
them and we've had a really good success. Their engines are excellent. We find that they use good
power for us. So those are the drive trains that we use. We use the Roush engines, 5 liter, 4.7,
and then some supercharged options as well. Cool. All right. Yeah. Let's see the next process.
So after the car is done with metal, it's going to actually go out to get powder-coated.
So the entire car, top to bottom, like this black example, gets completely powder-coated
so that we don't have to worry about any chance of rust down the line. And it allows us to really
protect the vehicle so the owner can enjoy the confidence regardless of the climate, right?
So as you can see, this car, this entire car, inside and out, the entire car is powder-coated.
So that's what happens here. And then as you can see, the cargo comes in and all the body work
starts getting done. And this isn't the right-hand drive one, but also the right-hand drive one.
So you can see now this is a car that's getting near paint stages. So it's got primer. It's been
blocked and sanded time and time again to make sure that our gaps are real nice and straight,
that we are using, you know, obviously a very meticulous process. A lot of the man-hours that
we discussed, of the 3,000 man-hours, are spent here to make sure that the car is absolutely
straight so that we can give it a beautiful paint job. So the car gets basically a powder-coat,
which is in black, and then it gets primer. And then we go through the process of blocking and
sanding in order to make sure that we're working through all the body panels to make sure we have
consistent lines, consistent gaps in the car. Awesome. And so, hey, you guys do your own paint
here as well? Yeah, so we have a full paint booth. So the car will get painted here in the paint booth.
We have a full mixing room. So it's all in-house? Everything is in-house. Really, the only thing
that we, the only two things that we outsource is the media blasting and the powder-coating.
Okay. Everything else, soup to nuts, gets done in-house. All right, now we're in the final
assembly area. So why don't us buy this car? Right, so we have here a couple cars that are
going through final assembly. This particular example, obviously the hood being off, this is
probably our most popular engine combination. It's the 427 aluminum small block with the fuel
injected stacks. This engine seems to have the highest amount of popularity. It sounds great,
it pulls great, 560 horsepower. It's just a fun, fun car to drive. It does everything well,
whether you want to cruise at 70 miles an hour or whether you want to mash it from left to right,
it seems to respond really, really well. What about zero to 60? Well, we're going to have to
do that test together, I think. When you get yours, we'll have to do the test together.
So again, a couple of things to mention, as I showed you in the metal shop, so you can see here,
we cut these out here in the metal shop so we can expel heat coming up through here.
You can also notice that we have some additional venting here in the fender wells here,
additional venting cord out so we can, again, keep the engine bay as cool as possible.
Notice you've got the 427 Eleanor here as well. Correct. All custom done for us.
You have an oversized radiator. Our intent with this vehicle is something that people can truly
drive and enjoy. So everything here is overbuilt in that regard. The largest air conditioning
system that we can buy, the biggest and baddest radiator that we can fit in here so that we can
absolutely keep the car cool and people can enjoy it. You have a coilover, suspension,
front and back, adjustable. So you can adjust the height as well. And the rebounding, right,
the dampening of the suspension. And is every car numbered? Yes, every car is numbered.
Because I noticed that you've got an Eleanor badge here as well. Correct. So here you have
this riveted in, officially licensed Eleanor, the gone in 60 seconds logo, hand built exclusively by
Fusion. And you can see here serial number 012. So this is car number 12. Correct. And that's the
original chassis VIN number there. There you have here exactly the correct and original VIN number
so that it can be properly titled. Perfect. And of course here we have something pretty unique.
You know, a lot of the builds that we do, most of the builds are true to the movie example,
pepper gray with black stripes. And every once in a while we get a customer that wants something a
bit different. So here we have a gloss black striped delete card. And I'll show you a couple
of interesting here as we lift the hood. Again, that same 427 fuel injected stack engine setup.
You can see here on the inside of the hood, the exposed carbon work on the inside. Wow,
so all these hoods on every car is carbon fiber. Correct. And that's something that we do here in
house. So we built out the capabilities to do our own carbon fiber. And again, part of the
approach of doing as much as possible in house is our ability to control consistency and quality
so that when we're dealing with a customer, we know exactly if there's an issue, we know exactly
how to address it and where to address it because it's under our roof. A couple of things that will
happen here. We also put a carbon fiber piece that goes here. Again, this car is in final
assembly. It's not completely done yet. But again, you can see the carbon fiber. This one doesn't
even have the plate on it yet. Okay. So yeah, so carbon fiber front bar, carbon fiber front hood,
carbon fiber rear hood as well. Correct. The rear deck lift here is also carbon fiber. You can
see it here on the sides. I'm loving one thing in this car. Look at that bottle. Nice. Go baby,
go. You press the button. Is this going to be hooked up? So we don't hook it up for the simple
reason that the the Roush engines come with 24 month, 24,000 mile warranty and hooking up the
So this is predominantly for, for, for, for looks and to pay homage to the, to the original movie.
You know, but as you can also see here, the entire trunk is completely finished and painted
and sealed. So everything is, there's a, there's a lot of detail and attention detail that goes
into building every single one of these. Again, you've got the billet hinges, exposed carb,
carbon deck lid. You know, a lot of, a lot of detail goes into every single one of these cars
here on the interior. And that cap, that signature. Correct. Correct. So the fuel,
the fuel cap is relocated. 67, 68 Mustangs have the fuel cap kind of over the license plate is
we are relocating them here to the, to the quarter rear quarter, just like in the movie.
So this is all the sound deadening. Correct. So we, we offer a complete sound deadening and
heat dampening dynamat for the entire car. This car is actually going through that as we speak.
Obviously you can see this as this car is a working process. A couple of other things here
that maybe you can see these, these downpipes here that you're seeing from the from the air scoops,
they're actually functional air scoops. So we actually plumb the air down to underneath the
car. And the reason we do that is these, these scoops, they capture a lot of air as you're
driving through. And if there's nowhere to, for that air to go it's not uncommon to see
these cracking around or wanting to lift, et cetera. So again, our, you know, we,
we use a full engineering team here, you know, work on, on solid works and auto pad and such.
And so we've, we've completely plumbed that so that as air flows through, it's actually expelled.
Correct. So their work in air scoops, unlike other replicas that are just there for display purposes
that are blocked off. And yeah, correct. True, true side exiting exhaust. And, and the way we
do it is we actually channel it through the frame of the car. So it actually is running through the
frame of the car and is you know, sounds great, looks good. And you don't have it kind of hanging
around because it's, it's channeled correctly and secured properly. So talking about sound,
can we start one up? Yeah. See what it sounds like. Ready? Yeah.
So here, guys make their own carbon. We're greeted by a raw carbon here, just sitting here,
a roll of raw carbon. And then we've got all the guys behind us working and making like here,
a front carbon hood. So that's for a Ferrari 488 custom body kit. So guys who also make
custom body kits for Ferraris and the Eleanor panels. And Gil's going to now show us a few more
other things that are made. You can see here, some of the molds that we pulled in order to,
in order to make the carbon fiber pieces. So this is a mold. Right. That's actually
for the front clip of the 488 body kit that we do. But this is the mold for that. You can see
the mold for the, for the Eleanor hood. Okay. So that's the Eleanor hood there.
And then here, you just got some examples of some of the pieces. Obviously the Eleanor
side scoops, the door sills, the, the, the cover in front of the radiator. A couple of different
things here. This is the front nose of the body kit for the 488. And you can see two different
finishes that we're displaying here. The matte, the matte carbon fiber and the glossy. So just
a couple of different examples here. So this is only carbon production over here.
Yeah. So now we've got a matte black car. Right. So again, you know, we, we love getting a unique
request from our customers. This particular customer wanted everything black. The window
wipers are black. Obviously the matte black finish, the wheels are black. The mirrors are
black. Everything inside and out is black on this car. It's quite an interesting look.
Wow. This is a very unique car. I've noticed that it doesn't have a wooden steering wheel.
It's a matte black steering wheel. Correct. Right back to the, to that custom feel for
this particular customer. Um, you know, they wanted everything in black, including the steering
wheel. So we, we did it all. Even the, even the, uh, the emblems, everything on the car
is absolutely blacked out. Uh, the gas cap, everything is blacked out on this car. So again,
just, you know, we, we take pride in being able to, to as often as possible say yes. Yep. Right.
What would be the recommended retail on a car like this? A car like this would be in
the $280,000 zone. Wow. Let me show you under the hood real quick. Yeah. So unlike the other two
cars that we looked at, uh, this particular car has the Coyote 5.0 liter, but with a Roush
roots type supercharger. Um, this particular drive train, uh, pushes out 600 horsepower.
Wow. Okay. So that's better than the 560 horsepower found in the 427. Correct. You've
got a supercharger mounted on top. Correct. And it has a different, different feel and a driving
and sound experience than the 427. And I'll fire this one up for you here shortly and let you
listen to this one. But again, here's that carbon fiber piece that I was articulating to in the
other, in the other car. So this goes on, on, on every car. Uh, you can see even the radiator is
black. The billet hinges that are normally fillet color are blacked out. So we really went the
extra, the extra mile if you will. And I noticed he didn't want visible carbon. So it's all matte
everything. Beautiful car. Now I reckon we should start this one up.
So it's got led interior lights as well. So we run leds, um, in the interior light as well. Again,
just nice touches. Um, you know, we want to again, keep, keep, keep giving that modern feeling
that modern, modern, uh, user friendliness while still obviously building a car. That's
you know, still Eleanor I've never seen anything that goes up and down that quick. Guys, as you
know, this is the official license gone in 60 seconds. Eleanor cars,
fusion motor cars are the only guys that can build these in the whole world.
So again, this has a different sound altogether, right? And you can see it doesn't have the same,
the same tone. And one, one cool feature is that the guys who use Odyssey battery,
these are very lightweight batteries. I know because I installed these in my Ferrari race
cars because you save about, I think seven kilos per battery compared to the conventional battery.
Yeah. And again, you can see everything's blacked out. Even, even the braces for the battery,
the, the, the hardware for the, for the NOS bottle, everything completely blacked
out for this customer. Yeah. It's a crazy car. This is a sinister Eleanor,
but this price tag is about $400,000 Australian dollars, but that's what you get.
A car that looks this sinister. All right, now we're going to check out underneath the car,
but before that we've noticed that the calipers are Ford disc brakes all around, and they say
Eleanor on the calipers there. That's amazing. Nice little subtle touches, but now underneath.
So you have here a multi-link fully adjustable coilover suspension, made it to obviously to a
nine inch Ford rear end. You can see that we, we do some structural reinforcement here
on the chassis itself to make sure that we have the proper rigidity. So again, so, so that this
car is, is enjoyable and safe to drive. There's a lot of horsepower. Want to be able to make sure
that we're getting it down to the ground properly, not having too much flex. All the exhaust,
everything is custom made by us in house. You might be able to see here what I was explaining
about the exhaust going through the chassis here. Okay. That's how that's channeled through
the chassis and comes out the side exit exhaust, right? Oh, that's a real clean touch.
This looks really neat underneath. I've got to give you that. It looks amazing. Again,
this isn't a finished, finished car just yet, but it's in final stages of assembly.
And you can just see the attention to detail and how everything is put together. So do you
use a modern gearbox? Yes, we use a Tremec six speed. We also offer a five speed option,
but most of the time we recommend the six speed. So you have that nice overdrive and ability to
cruise. So always manual stick shift. Has anyone ordered one in order? Yes, we have actually built
a couple of automatics. We do offer that as an option. Wow. So it is, it is possible. And
so that is an option, but again, most of them, most of them so far have been stick shift. We've
Yeah, no, this looks really, really good. I love it. You can see here we have a, uh,
with the mini tubbing, we can fit a three, three 15 year tire here. So what size tires on this car
right now? This is a three 15, uh, 35 17. Wow. So 35 series 17, three 15 and, and, you know,
a standard, a standard car would get a two 75, uh, rear tire again, if we don't do the mini
tubbing. So we mini tub, it narrows the, the, the rear, the passenger seats a little bit in the
back, uh, but not, not drastically standard state, uh, custom tank, um, electric e-brake,
like you would get in a new car, push a button and it activates. So it's a mix between where
classic meets modern. Yeah. We really, again, we really wanted these to be drivable and enjoyable
and easy to use and function, even something attention to detail for our customers. We
realized a lot of our customers are collectors. They don't drive these cars every day. So we
installed here magnetic. Let me see how this works. So here's the battery charger and just grab that.
I mean, it's a magnet. That's it. It just tucks right in. Um, and then you can start the car,
keep the battery tended. And so that when you're, you know, whether you drive it once a month or
every day or, you know, whatever the case may be, you know, you can get in, turn the key and fire
up. Nice. Um, we use led headlights, led reverse lights, of course, the infamous sequential turn
signals, um, you know, they go left to right. Um, so again, it's a real, real enjoyable, fun
car to drive. Nice. And after this stage it's road testing. So we'd like to put anywhere between two
to 400 miles on each car before they go out. Uh, make sure we work through any, any, uh, any
details or any bugs. Uh, of course these are hand built, custom built. So, you know, we want to make
sure that when we deliver a car, it's ready to go and, and, uh, you know, can be enjoyed by its new,
by its new owner. So every car gets road tested, uh, prior to being final delivered. Delivered. Yep.
Perfect girl. Amazing tour. Amazing factory. Just, yeah, it is so cool being here and, um,
yeah, we've got to thank you so much and, um, yeah, and we will see you real soon. I'll be writing
you up soon. Yeah. Yeah. You can do that right up. Yeah. Yeah. Thanks girl. Well guys, they have a
Fusion Motor Company and they're Eleanor cars, just simple perfection and one of the greatest
classic modern builds we've ever witnessed in our lives and on our channel on Supercar
Advocates. Hope you guys enjoyed the episode. We'll see you in our next one. Cheers.
