Virtual tour of the Baker Hughes Energy Innovation Lab

Cap'n Drea
46 followers
4 Video Views·Oct 30, 2022
Hi, my name is Jason Angelano. Welcome to the Energy Innovation Center.
I'm going to take a few moments to show you around our laboratory.
In this 10,000 square foot laboratory space, we have the ability to start off at a bench scale
and work our way to a field prototype, and we do that by progressive steps along the way.
We will start off with a small bench top test where we have high risk but minimal cost,
and we'll work our way through progressive steps to a field prototype where we have
minimal risk but a higher cost.
Here we'll take some of the more traditional oil field sciences and bring them into a modern age.
With machine learning and a number of other techniques, we can utilize CT scanners and a
number of other technologies to better understand the rock fluid interaction that happens in an
oil field environment. We also have a 400 foot test well that we use to replicate environmental
conditions and test our components and our equipment at higher processes and higher
temperatures than we normally see. Right now we have the ability to test over 400 feet deep.
We can test our equipment up to 3,000 psi of pressure on the annulus. There's the ability
for us to dissipate over 1,000 horsepower of cooling and over 1,600 amps of energy we can
pump to the equipment down hole. This offers us a wide variety of environments we can test
our equipment to and understand better how they perform. This is one of our CT scanners.
We use this to understand how parts behave, how they wear in, and how things like additive
manufacturing goes to produce quality parts for use in our components. We use this for a variety
of different purposes including but not limited to understanding failure modes, part composition,
and the interaction that happens between rocks and fluids in our core samples.
