Even the engines people call “bulletproof” have one specific way of failing, and in some model years it’s far more likely. In this video we go through the truck engines actually worth buying, with the best model years to target, the one weak spot to check on each, and what that weak spot costs if you ignore it.
This is the buy-list companion to our “Truck Engines to Avoid in 2026” video.
You’ll learn: ✅ The Toyota 5.7L V8 years to target, and why Toyota’s replacement engine was recalled ✅ Why the Ram 6.7L Cummins is great in 2013–2018 but risky in 2019–2020 (a fuel pump issue that can cost $4,000–$10,000+) ✅ The GM 6.0L V8 in HD trucks, which has no cylinder deactivation ✅ The Ford 5.0L Coyote: why 2015–2017 beats 2018–2020 ✅ The two engines that come with a real warning: the Ram 5.7 Hemi and GM 5.3 ✅ The 5-step check to run before you buy any used truck
⏱️ CHAPTERS (adjust to your final edit): 0:00 Why even “bulletproof” engines fail 0:40 How these 7 were picked 1:25#1 Toyota 5.7L V8 3:25#2 Ram 6.7L Cummins 5:35#3 GM 6.0L V8 (HD) 7:10#4 Ford 5.0L Coyote 9:00#5 Ram 5.7L Hemi 10:45#6 GM 5.3L V8 12:25 Honorable mentions 13:05 The pattern + what to check before you buy 14:30 Which engine fits you 15:20 Final scorecard
Sources include recall filings, manufacturer service bulletins, iSeeCars longevity data, and repair-shop and owner reports. Repair costs vary by shop and region. This is buying guidance, not a mileage guarantee.
🔔 Subscribe for more data-driven truck buying content, with no brand favoritism and no hype.
Truck Engines Worth Buying | Best Truck Engines 2026 | Most Reliable Truck Engine | Toyota Tundra 5.7 V8 Reliability | 6.7 Cummins Best Years | GM 6.0 Vortec HD | Ford 5.0 Coyote Best Years | Ram 5.7 Hemi Problems | GM 5.3 AFM Lifter Failure | Used Truck Buying Guide
Here's a number most truck buyers never hear.
The average vehicle has about a 5% chance of
ever reaching 250,000 miles.
Some truck engines beat those odds easily, but here's what nobody
tells you. Even the engines people call
bulletproof have one specific way of failing,
and in some model years that failure is much more likely.
So here are the truck engines actually
worth buying for each one you'll get the best years
to target the one weak spot to check and
what it costs if you ignore it three rules one
at least 10 years of real world mileage so no brand
new engines two the known weak spot has a known fix
and a known price so there are no surprises
three no unresolved failure pattern engines
that fail that last rule are in our engines to avoid
video this is the other list
and one promise if an engine has a catch you'll hear the catch
two of these seven come with a real warning
and i'll flag them clearly also the same brand can
build a great engine and a risky one
so i'm picking engines and model years not brands
number one is toyota's 5.7 liter v8 the engine
in tundra is from 2007 through 2021. here's why it
lasts it's a plain naturally aspirated v8
no turbos no cylinder deactivation it doesn't use
direct injection either
so there's no high pressure fuel pump to fail it's a big engine
that doesn't work hard and that's usually what lasts shops
and owner reports consistently put
well-maintained ones at 200,000 to 300,000 miles here's
the best proof of why this matters when
When Toyota replaced this V8 in 2022 with a twin-turbo V6,
the new engine was recalled
for machining debris that can damage the engine's bearings.
The first recall in 2024 covered roughly 100,000 vehicles,
and the recalls have expanded since.
One shop put the takeaway this way,
a well-maintained 2019 Tundra with 120,000 miles is often a
safer buy than a 2022 with 30,000 miles and unresolved recall work.
It's not perfect.
First, the secondary air injection pump, an emissions part.
When it fails, the truck can go
into limp mode. Toyota extended coverage on that system
for affected trucks, but on older trucks
that coverage has likely run out.
Repair quotes run roughly $700 to $3,000, depending on the shop.
Second, the cam towers can seep oil.
It's a leak, not an engine failure, but the reseal
is labor-heavy and often quoted between $1,200 and $3,500.
Third, the water pump,
usually around 150,000 miles, at roughly $400 to $650.
Best years, late-run trucks,
roughly 2010 through 2021, with records.
If you can, skip the earliest 2007 to 2009 trucks,
where the air pump problem was most common.
Number two is the 6.7-liter Cummins diesel
in Ram 2500 and 3500 heavy-duty trucks.
It's an inline-six, which means one cylinder head
instead of two and fewer parts to go wrong.
But this is the engine where the model year matters most.
The 2013 to 2018 trucks use a Bosch fuel pump called the CP3.
Owners and shops call these years the sweet spot.
Then, for 2019 and 2020 only,
Cummins switched to a different pump, the CP4.2.
Here's the problem in simple terms.
That pump relies on the diesel fuel itself
to lubricate its moving parts.
When wear starts, metal bits can travel through the entire fuel system.
Reported repair costs run from about $4,000 to more than $10,000,
depending on how far the metal spreads.
Ram recalled those trucks to put the older-style pump back.
So if you're looking at a 2019 or 2020,
ask for proof the recall work was done.
For 2021 and newer, Ram went back to the CP3 or the newer CP8 pump.
The other weak spot is the emission system, EGR coolers,
the particulate filter, and the DEF system.
The early 2007 to 2012 trucks had the most filter and EGR complaints,
and repairs, there can run $3,000 or more.
Short trips are hard on this system,
so a Cummins that only does grocery runs is a bad match.
One more data point. In IC Car's 2026 longevity study,
the Ram 3500 ranked number one among all
pickups, with a 31.9% chance of reaching 250,000 miles.
That's a result for the truck, not the
engine alone. But it shows how long these trucks run
when they're worked and maintained correctly.
best years 2013 to 2018 or 2021 and newer verify
the recall on any 2019 or 2020 number three is
the one almost nobody talks about GM's 6.0 liter V8
in the Silverado and Sierra 2500 HD and 3500
HD. It has a cast iron block, a simple pushrod design,
and no cylinder deactivation. Remember
that last part, because it explains a lot in a few minutes.
Fleet managers and mechanics report
these engines regularly passing 300,000 miles,
and some owners report 400,000 without a rebuild.
Those higher numbers are owner reports, not a study,
but they're consistent. The common problems
are small throttle position sensors knock sensors
exhaust manifold leaks and the water pump these
are cheap well understood repairs the catch
is that this engine is heavy duty only you won't
find it in a 1500 it's
also thirsty one owner reported about 14.5 miles per gallon in daily
driving it ran in HD pickups through 2019 newer 2020
and later HD trucks use
a 6.6 liter gas V8
and GM's own service documents list no cylinder deactivation
hardware on it that's a good sign
but it's too new for a long-term verdict
best years 2010 to 2019 HD trucks
with the 6.0 liter especially ones with
maintenance records.
Number 4 is Ford's 5.0-liter Coyote V8,
but only certain years. The 2015 to
2017 trucks are the sweet spot.
They use iron cylinder liners, and they had better oil control
and an improved timing chain design compared
with the earliest 2011 to 2014 trucks, which had more
oil use and timing chain noise.
Then came the 2018 to 2020 trucks. Ford changed to a sprayed-on
cylinder coating called PTWA. Here's why that matters.
With an iron liner, a shop can re-bore
a damaged cylinder and keep the block.
A sprayed-on coating can't be re-bored. If the wall gets scored,
you're usually looking at a replacement short block.
And many owners of 2018 to 2020 F-150s
report oil use, in some cases, a quarter to every few thousand miles.
Ford has a service bulletin on
it, TSB19-2365,
and has reportedly released software updates aimed at it.
Not every truck
burns oil, but if you're shopping those years,
ask for oil consumption history and have a shop check
for cylinder scoring.
Other things to know, ignition coils are a known wear item, and on
newer trucks running the oil low is the fastest way
to cause damage check the dipstick regularly
best years 2015 to 2017 be careful with 2018
to 2020 newer trucks are too new to call number
five comes with a warning Ram's 5.7 liter Hemi
in our engines to avoid video we called it a strong
pick that's still true but here's the full picture
the engine block is tough and plenty of Hemis run
past 200 000 miles the top end is where
the problems are first exhaust manifold bolts snap
many owners deal with it often around 100 000 miles it causes
a tick on cold start and it's
an annoying but fairly cheap fix ram even has
a service bulletin on cold start manifold ticking
for 2019 to 2024 trucks second
and more serious the famous hemi tick from a failing lifter or
camshaft lobe it's most reported on trucks from 2009
on that use the cylinder deactivation system
part of the reason is the oiling path oil reaches
the lifters through the head gasket and rocker
shaft and low speed driving leaves them
with little direct oil pressure even so the evidence
doesn't prove cylinder deactivation is the only cause
and there's no reliable mileage for it some
fail early and many never do here's how
to tell them apart a tick on cold start that fades as the
engine warms is usually the manifold a tick
that stays especially with a misfire points to the
lifter when you shop ask for oil change records listen
to the engine both cold and hot and have
a shop check the oil filter
for metal verdict worth buying only with records and a careful
listen number six is the gm 5.3 liter v8
and it comes with a second warning in our engines to
avoid video we said the 5.3 was a stronger choice than
the 6.2 that's still true but stronger
doesn't mean perfect the 5.3 is gm's most common truck v8
and many run well past 200 000 miles on
original parts but its best known failure
is the collapsed lifter in the cylinder deactivation
system called afm and later dfm the system shuts off cylinders
to save fuel and the lifters that
switch on and off can collapse
and stick watch for a tick at cold start a rough idle or a misfire
code on one cylinder. For 2014 to 2018 trucks,
one repair shop analysis puts reported failures
around 119,500 miles on average,
with 2015 to 2017 reported as the worst years. Mechanics often
point to 2018 as the best of that run.
GM itself has published a service bulletin on collapsed
AFM lifters for these engines. Newer trucks aren't immune.
The same analysis reports a few
2020 and newer trucks failing under 20 000 miles what improves
your odds owners with documented
oil changes at around 5,000 miles report fewer failures some owners add
a device that stops the
cylinder deactivation but the evidence
that it prevents failures is mixed and if you ever hear
a tick or feel a misfire on one cylinder stop driving it
this failure gets worse fast especially
if it damages the camshaft verdict by 2018
if you can ask for oil change records and expect this to
be the engine you baby number seven
is really two honorable mentions first ford 7.3 liter godzilla
gas v8 in super duty trucks since 2020. it's a simple pushrod design
and most owners report few
problems but early trucks had spark plug wire issues
and some owners report lifter failures
it's only about six years old ask me again
in five years second if you want a farm truck with
no computers there's ford's old 300 straight 6
built through 1996. it uses a gear driven cam
shaft and a thick iron block
and plenty are still working you can't buy that new and it's not a
daily driver by modern standards
but a clean one makes a great work truck look at this list
the toyota 5.7 the gm 6.0
and the cummins have no cylinder deactivation the two engines with
warnings the gm 5.3 and the ram 5.7 both use it
and in both cases lifters are the most reported
failure that's the same pattern from our engines
to avoid video the simpler the valve train
the longer the record before you buy any
of these do five things one get the exact engine and model
year from the vin not just v8 2. ask
for oil change records 3. listen to a cold start and a
hot idle 4. run the VIN for open recalls especially on a 2019
or 2020 Cummins 5. budget for the known
wear item like the Tundra's air pump the Hemi's manifold bolts
or the Coyote's oil use on oil
changes your manufacturer's oil life monitor
usually allows longer intervals and Ford's own
schedule lists a shorter interval
for severe duty like towing many mechanics and owners of the
lifter sensitive engines the GM 5.3
and the Ram Hemi change oil closer to 5,000 miles that's not
a factory requirement for every truck
and no study proves it prevents failures but oil is a lot
cheaper than a camshaft so which one should you actually buy
if you tow heavy or work your truck
hard look at the Cummins in a 2013 to 2018 or 2021
and newer Ram or the GM 6.0 in a 2500 HD if you
If you want a full-size daily driver that's built to last,
a late-run V8 Tundra is the
safest bet on this list.
If you want a Ford half-ton, the Coyote in 2015-2017,
and Ford lists about 100,000 miles
for its spark plugs.
And if you're set on a GM or Ram half-ton, you can absolutely buy one.
Just treat the paperwork as part of the price.
A truck with documented oil changes
is worth more than the exact same truck with none.
Here's the scorecard.
Buy the Toyota 5.7 V8 2010-2021,
the Cummins in 2013-2018 or 2021 and newer,
and the GM 6.0 in HD trucks.
Buy the right years.
The Ford 5.0 2015-2017.
Buy with conditions,
the Ram 5.7 Hemi and the GM 5.3 with records and a careful listen.
Too early to call, the Ford 7.3.
The common thread is simple.
A proven design, the right model year,
and a known weak spot you can check before you pay.
That's the list.
Engines with real mileage behind them and clear catches.
If you own one of these, tell us the engine,
the year, and your mileage in the comments.
real numbers help everyone watching if this saved you
from a bad purchase subscribe we've
covered which engines to avoid
and this was the list to buy see you in the next one