The Unknown Fix for Pressouts in the Snatch & Jerk

Weigh tlifting
8 followers
1 Video View·Aug 19, 2026
AI Generated·May contain errors
If you're always pressing out your snatches or jerks, pay attention to your grip tension.
An excessively tight grip on the bar will slow your lockout and will stop your elbow
from extending completely, meaning it's more likely to re-bend.
And you can feel this easily with a quick punch dancing experiment.
First, relax your hand as much as possible and punch into a fully locked out position
as fast as possible.
Then repeat that but while squeezing your fist as tightly as you can.
If you find this confusing because you know that squeezing the bar tightly improves your
pressing strength, remember, we are not pressing in a snatch or a jerk.
We are punching violently, quickly, briefly into a fully locked out position before there
is any resistance to press against.
This one often seems confusing until it's explained and experienced.
There is no pressing in the snatch or even in the jerk.
In both cases, that pressing motion of the arms is done without the weight pushing back.
The bar is either still rising from being accelerated upward with the legs and hips,
or it's at it's apex before it started to fall, meaning it's not pushing down against
us.
The arm push against the bar does put additional upward force on it, which helps it continue
rising longer than it would otherwise.
But mostly that push is moving the body down under the bar, meaning it's largely just
adding to the pull of gravity.
It's like pushing a car that's already rolling downhill.
The only real resistance is in the jerk at the very start of the arm push, because that
push is helping to stop the body's upward motion and start it moving down.
But this is a brief moment and nothing like the kind of resistance you feel during a press.
This lack of resistance is why we can get such a quick motion into lockout, unlike the
slow process of pressing against a heavy weight that's pushing back against our effort.
If you feel yourself pressing against resistance in a snatch or jerk, things have gone terribly
wrong well before the lockout.
For the snatch, this can be things like inadequate bar speed from a weak, short, or unaggressive
pull, hesitating at the top of the pull, or pulling too long past reaching maximal bar
speed, being out of balance forward, the bar being too far away during the pull under,
or otherwise poor third pull mechanics, or a lack of aggression in the pull under.
For the jerk, this can be inadequate bar acceleration from a weak, short, or unaggressive drive,
excessively tight arms, or an early push with the arms, hesitating between the drive and
the punch with the arms, which lets the bar lose too much speed, or pushing the bar forward,
either in the drive or with the arms.
In the jerk, the punch into lockout is a longer motion, because the entire movement under
the bar is an arm push.
In the snatch, it's a really brief motion at the end of the turnover as the hands flip
back under the bar.
Your hands can't just be completely relaxed.
Obviously, you need to remain in control of the bar, and have enough tension to maintain
the desired hand and wrist position as the weight of the bar settles onto you overhead.
You just need to keep that tension minimal into the lockout, and then increase it as
needed to hold the correct position and maintain control.
And remember, a tight grip is only one of quite a few possible reasons for press outs,
but it's a good one to be aware of, even if you're making other mistakes.
Another point to keep in mind in the jerk is that a tight grip starting in the rack
position can cause problems long before the overhead position.
It'll tend to cause you to push early with the arms, meaning you're getting less of
your leg drive force into the bar, and therefore less acceleration, and makes it more likely
you'll push the bar forward.
It can also reduce the security of the bar in the rack, allowing it to move during the
transition from dip to drive, creating or adding to the same problems of less force
transfer and a forward bar path.
So even if you're demonstrating other problems, very often relaxing your grip in the rack
position can improve your lockout, and it'll help you avoid gripping too tightly later.
And finally, remember that keeping your grip relaxed enough in the jerk rack position doesn't
mean you need to use an open grip.
You can still have a full grip around the bar without squeezing it too hard.
