We’re back at Ventura Harley-Davidson for Episode 3 of The Parts Counter, our four-part series presented by @hotbikemagazine. In this episode, Editor-in-Chief Jordan Mastagni and H-D Technician Cody Gordon install the versatile Harley-Davidson Defender Quick-Release Saddlebags on a 2025 Harley-Davidson Street Bob motorcycle.
Designed for riders who want to add storage without sacrificing style, the Defender Bags are waterproof, lockable, and hold their shape. The quick-release function makes them perfect for everyday use or longer trips when you need to bring along extra gear.
To make it all work, the team also installs the Rear Turn Signal and License Plate Relocation Kit, which creates the space needed to mount the bags while keeping the rear end clean and functional.
Welcome to the parts counter presented by Hot Bike Magazine.
I'm your host Jordan Mustagne, editor-in-chief of Hot Bike.
We're back at Ventura Harley-Davidson today installing Harley-Davidson's Defender quick
release saddlebags on the 2025 Street Bob. If you missed the last two installments,
check out the Harley-Davidson YouTube channel to get up to speed. Again, I'll be joined by
Cody Gordon, Ventura Harley certified technician, who's going to help us do this install.
The Street Bob is a cool stripped down cruiser already and these quick release Defender bags
are the perfect solution for owners looking to add some luggage. The Defender bags are easy
to install, they hold their shape, and they come with waterproof liners. They're also lockable,
MOLLE ready, and have a quick release function which is perfect for long rides or for quick
runs too. Hey Cody. How's it going Jordan? Are you sick of us yet? Not quite yet.
I'm excited that today we're going to install some Defender quick release saddlebags. I think
they'll add a nice bit of function for your customer, so you got kind of a little mini
bagger out of this bike. Perfect, I'm sure she'll be stoked. Let's get into it. Yeah, let's do it.
To get started, I'm going to remove this side cover so that we can pull that maxi-fuse out
since we're doing some electrical work. I'll jump in there and I'll pull the seat off,
and then I'll start unplugging all the wires. I like to crack these four bolts loose,
two on each side while it's on the bike still so we don't have to wrestle with it on the bench
later. Now we just got to unplug all the wiring underneath here, pull these other little grommets
on the fender, tuck them out of the way, then we'll just unplug the license plate light,
and then both turn signals. We'll just get these other four bolts off that we previously loosened,
and we'll just take the fender on over to the bench, slide it back a little bit, and then up.
We're going to take our turn signal bracket, we're going to route our license plate wire and
our turn signal wires through it all the way back to our turn signal and license plate mount,
and then we're going to reinstall the factory bolt, snug it up, and we'll come back and torque it
to 15 to 18 foot-pounds. Now we're going to lay our wires flat in there around the hole and put
our backing plates on, three little tiny Allens to hold that plate on there. Turn signal extension,
our turn signal, route the wiring back through the strut, pull it all through,
supplied bolt. So we're going to torque the turn signal extension to 25 to 27 foot-pounds.
So we're just going to route up both of our wires down the slot here,
we're going to stick our new tape that's provided with the kit back in the same place as it was
before. We're going to reinstall the strut back onto the fender, and since we're going to be
installing the bags and docking hardware, we're going to put that on now instead of putting the
stock bolts back in. You're going to put the wide one towards the front of the bike. One little drop
of blue Loctite on that bolt. Now we'll torque that screw to 21 to 27 foot-pounds. Right side,
similar process, and remove the two strut bolts. Just going to fish our wiring through,
another drop of Loctite on the factory bolt. We'll just finger tighten them for now to hold it up
there. There we go. Torque those to 38 to 42 foot-pounds. So for the two turn signals, we're
going to install these extensions that just plug right on. Left one, crimp it down. Now we'll see
how much length we're going to need on this. Plug in the plug, clip it into the factory location,
route the wires with a little bit of excess, and cut those to the length and then strip them.
So these butt connectors also heat shrink, so we're going to go ahead and shrink them down.
Now those are shrank down, should be able to fit the conduit over both sides.
Make sure we got our red going to violet, our black to black. We'll reconnect our license plate
light and return these two back to their grounds. Whip off the excess of the zip ties.
Let's put this maxi-fuse back in and then we can test all the lights, make sure turn
signals are coming on and we're good to go, right? It's always a good idea before putting
the seat back on. All right, so on these docking posts, they're very specific as to where they're
positioned. So you have to clock them with the front posts showing the plus sign at 12 o'clock
and the back posts showing the minus sign at 12 o'clock, and that will ensure that the bags go
off and on how they're supposed to. So you see the little latches? Yeah. Okay, up, slide it on there,
push the little button, and then this is how you lock them. Push that in and turn it,
it's locked. So now that we got the docking points all adjusted, we're going to come back
through and torque them down to 28 to 32 foot-pounds. Try and hold on them so they don't
turn. All right, we got everything torqued down, we got the seats replaced. Moment of truth. Let's
put these bags on just like that. The bags come with these cool waterproof liners, nice little
clips too. Okay, so we're done. We got these new Defender bags on. I think they look great.
I love how they mount to the actual docking hardware. Yeah, they put a lot of thought into
the mounting system for sure, and they fit really good with that turn signal relocation we did.
I know, yeah, you see these cutouts, it's very efficient and clean and tidy. Definitely.
You can actually fit a lot of stuff in here. They have a pretty big capacity for sure.
The fact that they lock to the bike is a nice bonus because you never know, right? A little
peace of mind, it's a good thing. They're pretty easy to install. Very, very simple,
very straightforward. Straightforward, they look cool, and they function well. Win-win, right?
Exactly. Dude, I appreciate all your help getting these on. No problem. I think your customer is
going to be stoked. You got one more session with us. Then we're done. And then we're done.
We're out of your hair. But we got a new two-up seat, and we got a new coil cover.
It's the subtleties, right, that make a difference. Thanks again. Yep, anytime.