This farming documentary takes you inside modern agriculture, starting with a giant combine harvester that cuts up to 400 acres of Kansas wheat in a single day. Watch it cut, thresh, and unload grain without ever stopping. Next, travel to Puglia, Italy, where tunnel-shaped machines shake olives off whole rows of trees in minutes. Then step inside huge US pig farms and see how outdoor farms in Europe raise pigs differently. From high-tech machines to hand-picked fruit, this farming documentary shows how food is made around the world. Subscribe for more farming documentary videos!
In many fields today, a single machine
can harvest hundreds of acres each day.
On modern farms, robots now do the hard work
of cleaning barns and milking cows,
yet some fruits still have to be picked by hand.
From modern machines to traditional know-how,
this is how farm
products are made all
around the world.
In the endless wheat fields of Kansas,
a single wide combine harvester
can cut between 200 and 400 acres a day.
It sounds hard to believe,
but it is fully possible.
With a working width of up to 15 meters,
the whole strip of wheat is cut and fed into the
processing system in one pass.
After cutting,
the wheat is moved
inside to be threshed
and separated.
Here the crop flow is split into two streams
that go through two threshing rotors at the
same time, raising intake capacity while keeping grain damage low.
Next, the grain is cleaned by a dual sieve system
of about 11 square meters, which removes
broken straw and other material before it goes
into a 32 cubic meter grain tank.
When the tank is full, the grain
is unloaded at about 650 liters
per second into a grain
cart running alongside without stopping the machine.
Meanwhile, the straw is finely chopped
and spread evenly across the field,
adding organic matter and preparing the soil for the next crops.
Putting many steps into one machine
does more than make harvesting faster.
Fewer passes over the field also means less soil compaction,
a step
toward more
sustainable
farming.
Thanks to its flexible, modular design,
the harvesting unit can be replaced with
a specialized spraying system
so the machine can take on another job in the field.
This module uses a spray boom from 42
to 70 meters wide together with a high capacity tank
so it can spray a large area
in just a short time.
It's high clearance design
lets the machine move through the field while crops are still growing
and it causes little damage
to stems and leaves.
While working the machine plans
its own route and adjusts the spray rate
to match the real conditions of each area.
Depending on field conditions,
it can travel at up to 20 kilometers per hour.
From the raised cab,
which can turn 270 degrees,
the operator can still see
the whole process.
Besides spraying, the machine can
also be fitted with modules for tillage, seeding and
fertilizing, and changing modules
takes less than 20 minutes.
This flexibility is the machine's greatest strength.
One machine handles many farming tasks, saving time and labor,
and making full use of the equipment's power.
With about 60 million olive trees,
Puglia is Italy's largest olive growing region,
producing about 50 to 60 percent of the country's
olive oil, and in some years, more than half.
The super high-density olive groves here,
trees are planted close
together over large areas,
so picking by hand is almost impossible.
So the straddle harvester has become
a common way to mechanize the work.
Shaped like a moving tunnel,
the machine can cover a whole row of trees as it passes over them.
A special gripping
and shaking system works on the canopy,
creating strong vibrations that make
the olives fall all at once
into catching trays below.
The fruit is then moved onto a conveyor
belt while leaves and small twigs are sucked away inside the machine.
The cleaned olives go
into onboard bins that hold
a total of about 7,700 pounds.
By doing several steps at once,
the machine needs only a few minutes per row, dozens of
times faster than
picking by hand.
Fruit hardly touches the ground,
which reduces bruising
and keeps its quality high.
Thanks to its special design,
it can handle trees over 16 feet tall and work on rough
Rough ground and slopes while still collecting fruit quickly.
With its strong performance and just one operator,
the machine can harvest about 24.7 acres a day.
For smaller
groves, the usual
choice is a
trunk shaker.
When it runs, a hydraulic arm grips the tree trunk tightly
and sends strong vibrations,
making the olives
fall all at once.
Under the canopy tarps, or large funnel systems,
are set up in advance to collect the fruit.
This method is especially good
for old olive groves where trees are usually planted almost
10 meters apart.
However, the trunk must be straight
and thick enough for a firm grip
and the roots must
be strong
so the tree stays steady
under the shaking.
On modern dairy farms,
manure robots are making barn cleaning easier
and more efficient. Programmed in advance, the robot
moves on its own along a preset route
and at a set frequency to collect waste from the barn floor.
A sensor system helps the robot detect obstacles
and change direction when it meets walls or
tight corners, so it
rarely gets stuck.
While working, the robot sprays water in front
of it to thin the manure, scrapers push the
manure together, and then a vacuum unit sucks it into a tank inside.
When the tank is almost full,
the robot finds its way
to a dump station to empty the waste
and it also charges its battery for the next run.
Schedule's routes and work modes can all
be set up easily through a control app.
Powered by an electric motor,
the robot runs quietly without noise
that could scare or
stress
the cows.
A barn floor that stays clean
and dry keeps the cows' hooves cleaner and lowers the risk
of hoof diseases.
A better living space
also helps keep milk
production steady.
Robots are not only used for keeping barns clean.
They also help with many other jobs on dairy farms, especially milking.
With 60 stalls, the rotary milking platform
can finish one full turn in just nine minutes,
milking up to 250 cows per hour.
Notably, nearly 90% of the cows can
step onto the platform by themselves
after only four training sessions,
so the system quickly gets close to its full working capacity.
As each cow steps in a reader mounted
on a post identifies her automatically and shows her
information on the control screen.
Each robotic arm has a 3D camera
at the front to find the
exact position of the teats.
Using height data for each cow
from earlier milkings,
the robot adjusts itself, attaches the teat cups,
and removes them when milking is done.
During milking each cow's status is updated all
the time with a color shown next to her name
and ID number. When her milk yield gets close
to her usual amount per milking,
the color slowly turns dark green.
These cows need only about five
to six minutes to finish milking.
After that the color turns gray showing
that the job is done.
The whole process is automatic
while the operator can still monitor the work
and keep track of each cow's information.
So how does fresh milk travel from the farm to the consumer?
Right after milking,
the milk is about 37 degrees Celsius,
close to the cow's body temperature.
Thanks to a closed milking
and collection process, the milk
hardly touches the air or human hands,
which keeps it clean
and high in quality. The milk
flows through stainless steel
pipes into cooling tanks,
where it is quickly cooled to about four degrees Celsius.
On a regular pickup schedule,
the milk is pumped into special insulated tanker trucks
that keep it steadily cold for the whole trip,
slowing the growth of bacteria.
At the plant, the fresh milk
goes through several quality
and safety checks
before it is pasteurized and homogenized. Then
the milk goes to the packaging line and is packed
in many forms, from glass bottles
and plastic bottles to cartons ready to reach consumers.
In commercial rabbit farming,
both the housing and the daily care of the rabbits
are organized around
a strict process.
Rabbits are usually kept in wire mesh cages
arranged in several tiers
or lined up in long continuous rows.
This layout makes the best use of space
and also makes it easier to manage and care
for large numbers of rabbits.
Housing area must always
be kept dry clean
and well ventilated to give the rabbits
good conditions to grow.
Among Meat Rabbit breeds,
the New Zealand White is a popular choice because of its
white fur, red eyes,
and strong, sturdy body.
This breed grows fairly fast
and usually reaches market weight after about 10 to 13 weeks.
To support their growth,
they are fed nutrient-rich, formulated
pellet feed along with hay to give
them the fiber they need.
When fully grown and ready for sale,
each rabbit usually weighs about 4.4 to 5.5 pounds.
Depending on the market, rabbit fur and
some byproducts such as rabbit manure
are also used for pelts or fertilizer.
Because rabbits breed quickly
and have large litters,
they are well suited for growing large-scale operations
and keeping a steady supply.
However, to make the farm work well,
farmers still need to focus on disease control, keeping
cages clean,
and providing
a suitable living space
for the rabbits.
On industrial farms,
thousands or even tens of thousands of pigs are raised in large,
fully enclosed
barn systems.
The space inside is divided into separate areas
to suit each stage of growth, from weaned
piglets and pregnant sows
to finishing pigs being fattened before they go to market.
On average, each sow can give birth
to about 11 piglets in a single litter,
so farms with thousands
of sows can produce a large supply
of piglets over many breeding cycles.
During the finishing stage, the diet is made up mainly of corn
and protein-rich ingredients such as soybean meal.
In the United States,
pigs are usually raised to about 270
to 285 pounds before they are sold.
Workers also check the feed regularly
and keep a close watch on the herd's health and growth rate.
Meanwhile, in the United Kingdom
and many other European countries,
some farms choose outdoor
pig farming instead.
The pigs are raised on large plots of land
surrounded by strong fences where they
are free to move around, dig,
and explore their surroundings.
Shelters made of wood
or metal are set up to protect the animals from rain and sun
And keep them safe when the weather changes.
Their food includes rations given
by the farmer together with natural plant foods
that they can search for and find on their own, such as roots.
With more room to move,
the pigs can build better muscle,
and this way of farming also
suits organic pork production, which brings a higher market value.
Red fruit is usually harvested
when the fruit is mature and fully grown,
but not yet soft and ripe.
At this point, the skin is still firm,
the skin segments are clearly spread out, and
the color slowly changes
from dark green to light green
or slightly yellow.
Fruit hanging low can be picked by hand,
while fruit on high branches is picked with long
poles fitted with net bags.
Fresh breadfruit often releases
the white latex where it is cut, so it must be placed
into baskets with care to keep the latex off the skin
and to avoid bumps that cause bruising.
As a fast-growing tropical fruit tree,
breadfruit can be harvested almost all year round.
Breadfruit has a light aroma, and its flesh is starchy,
with a fairly mild taste that
reminds people of freshly baked bread.
The starchy flesh is often boiled,
fried, or roasted
while the fruit is still green
And riper fruit has a soft texture and a mildly sweet taste,
which is great for cool, refreshing
smoothies.
Besides its many uses, breadfruit also provides carbohydrates,
fiber, vitamins, and many minerals,
adding to the range of nutritious foods.
Around January each year,
Colombia starts its first
Chontaduro harvest,
when the ripe
Bright fruit turns yellow-orange or deep red.
Because it grows on palm trees 10 to 20 meters tall
with trunks covered in sharp spines,
Chontaduro is not an easy
fruit to harvest.
Farmers must use long poles
with cutting blades or climb
the trees themselves to pick it.
This tropical fruit has two main harvest seasons each year,
and each season usually lasts about
two to three months.
After collection, each fruit is removed from the stem.
Checked for quality and sorted right in the
orchard, Chontaduro has crumbly flesh with
a simple nutty taste similar
to chestnuts or cassava
and a light smoky aroma. It is
also a source of carbohydrates, fiber,
protein, calcium, iron and healthy fats.
Seen as a traditional superfood,
Chontaduro is especially
popular in the city of Cali.
The fruit is usually boiled, peeled,
and eaten with salt and honey as a well-known street snack.
Noni trees can bear fruit all year round and usually start producing
a harvest about 8 to 12 months after planting.
When the fruit is mature enough,
the skin slowly turns from green to yellowish green
or ivory white while the flesh stays firm.
Farmers use these signs to choose
the right fruit and gently pick each one
from its stem by hand.
Picking must be done firmly but gently,
without pulling hard so the branches and the other
fruit on the tree
are not harmed.
Noni is quite an unusual fruit
because of its strong smell and its sour, bitter taste
that is not easy to enjoy.
This is why it is also known by the nickname stinky cheese fruit.
However, the fruit still draws interest
in folk medicine
because it contains antioxidant compounds
and has anti-inflammatory properties.
To make it easier to enjoy the fruit
is often combined with sugar during fermentation or
used
as an ingredient
in nourishing
stews.
Technology may change the way we farm,
but the goal has always stayed the same.
It is to produce food
that keeps life going.
Which process impressed you the most?
Share your thoughts with us in the comments below.