The Engine That Is Shaking The Entire Industry

Warship And Aircraft
72 followers
AI Generated·May contain errors
Over the next 20 years, the airlines of the world will need somewhere around 34,000 new
single-aisle jets. That estimate comes from Airbus, whose forecast, published in July 2026,
counts 42,060 new passenger and freight aircraft through 2045, about 81% of them narrowbodies like
the A320 and the Boeing 737. Nearly 20,000 of those jets will replace older aircraft,
and the rest are for growth. Each will need two engines, and most will stay in service for
decades. Yet nobody in the industry can say with certainty what kind of engine will hang
under their wings. That uncertainty comes from one machine. It sits in a test cell in France,
its long carbon fiber blades exposed to the open air, and it has not carried a single paying
fan, built by the GE and Safran partnership. Instead of hiding its fan inside a smooth casing
like every airliner engine flying today, it lets a single row of long blades turn in the open,
with a row of fixed vanes behind them to straighten the air. It is not certified,
it is not for sale. Its first flight on an airliner is still years away.
So the natural assumption is that an engine like this cannot shake anything. It is an experiment,
a science project, something that might show up in a museum one day next to the strange
prototypes of the past. That assumption is wrong, and the easiest way to see why is to look at what
the rest of the industry has done since this engine started to look real. Every major engine
maker and both big airframers have been forced to take a public position on it. Some have bet on
it, some have bet against it. A few are quietly building alternatives so they are not left behind
either way. Start with the most common belief about this engine. Most people assume the whole
industry agrees that the open fan is the future, and that the only question is when it arrives.
It does not agree. Not even close.
Pratt & Whitney, the maker of the geared turbofan that powers a large share of the
Airbus A320neo family, has taken the opposite side. In July 2026, the president of its commercial
engine business said he was adamant that the engines on the successors to the A320neo and the
with the fan inside a casing, not open fans. Pratt is planning a second generation of its
geared turbofan for those future jets, with a target for entry into service around 2040.
Its argument is evolution over revolution. It has lived through years of durability trouble
on its current engine, and its message to airlines is simple. Keep the architecture you know,
and make it better one step at a time.
Rolls-Royce has also stepped into the fight, which is surprising for a different reason.
Rolls-Royce is famous for the Trent engines on widebodies like the Airbus A350 and the Boeing
787. But on June 29, 2012, it walked away from the narrowbody market. It transferred its share
of International Aero Engines, the consortium behind the V2500 engine on the older A320s,
to Pratt & Whitney for $1.5 billion up front. The same deal set up a new partnership with Pratt,
MTU, and Japan's Aero Engine Consortium for future midsize aircraft, a market Rolls-Royce
put at around 20,000 new jets over 20 years. Yet for more than a decade, one of the best-known
names in jet engines had no engine in the busiest segment of the airliner market.
Now it wants back in. Rolls-Royce has been working on a narrowbody-sized version of its
Ultrafan, a geared engine with the fan inside a duct. And it showed a full-scale mock-up of
the Ultrafan 30 at its full-year results in March 2026. That same month, the company said publicly
that it remained unconvinced that the benefits of an open rotor outweigh the risks of fitting
one to an airliner. In other words, the company that left this market in 2012 is returning with
a bet that the open fan will not win. Then there is Boeing. In July 2026,
the president of Boeing Commercial Airplanes said it was too early for the company to have
a position on the open fan. Boeing said it was actively engaged with GE and learning more as
the technology matures. But it also made clear that a 737 successor is not coming soon. First,
it has to finish certifying the 737 MAX 7, the 737 MAX 10, and the 777-9, and repair its finances.
Look at what that adds up to. One engine that does not exist commercially has split the industry
into camps. GE and Safran are pushing forward with it. Pratt & Whitney is betting against it.
Rolls-Royce is developing a rival design. Boeing is watching and waiting.
Airbus, as you will see, is the one company that cannot avoid making a decision.
Before getting to Airbus, there is a second belief worth taking apart,
because it sits behind much of the resistance to this engine.
It is the belief that an open fan is simply more dangerous,
and that removing the casing means removing the protection.
On a normal turbofan, the casing around the fan has a hard job. If a fan blade breaks off
at full power, the casing is built to catch it before it can hit the wing or the cabin.
An open fan has nothing around its blades. That is exactly the point Boeing has raised.
Its concern is that a blade separating in flight could pierce the passenger cabin,
and that the armor needed to protect the fuselage could add so much weight that it
eats into the fuel savings that make the engine worth building in the first place.
GE's answer is not to deny the problem. It is to change the physics of it.
The Rise fan is designed to turn slowly, at roughly 1,000 revolutions per minute,
compared with more than 2,500 on a conventional ducted fan.
A slower blade carries far less energy.
GE says a blade on the Rise design carries about six times less energy than a blade on
a comparable ducted engine. So instead of building a heavy containment ring around the fan, the plan
is to move the protection to where it matters, a shielded zone in the side of the fuselage next to
the engine, and to make that shield smaller because there is less energy to stop.
There is also a track record GE likes to point to. The blades are made of composite,
and GE says composite fan blades have never been involved in a blade-out event.
It also points to aircraft that already fly with large, exposed propellers turning at similar
speeds. The ATR-72 regional turboprop spins its propellers at about 1,200 revolutions per minute.
The Airbus A400M military transport turns its big propellers at up to about 860.
Both have flown for years, with blade separations rare or absent.
None of that settles the argument. A regional turboprop is not a narrowbody airliner cruising
near the speed of a jet, and the regulators who will certify this engine have rulebooks
written around casings. But it shows why the debate is not a simple question of safe versus
unsafe. It is a question of weight, energy, and where the armor goes.
Noise is the other half of that argument. Larger blades spinning without a casing can be heard,
and airports with strict noise limits will not accept an engine that is louder than what they
have today. Airbus itself has said that dealing with the noise of these bigger rotor blades
requires new design choices and new technologies, both in the engine and in the aircraft around it.
That is one reason the flight test matters so much. A wind tunnel can predict how loud an
open fan will be. Only a real airliner flying over real microphones can prove it.
So here is a question to think about. If a fifth less fuel meant adding some shielding to the side
of the fuselage, would you consider that a fair trade? Or would it make you think twice about the
seat by the window? Let me know in the comments. And if this kind of behind-the-scenes engineering
is what you came for, subscribing is the best way to make sure the next one finds you.
Now jump ahead a few years. Picture the end of this decade at Toulouse in the south of France.
On the flight line sits an Airbus A380, the double-decker that airlines once walked away from,
painted in the new livery Airbus and CFM revealed at the Farnborough Airshow in July 2026.
Hanging from its wing is something no airliner in service flies with today.
A full-size rise-open fan, its long blades turning in the open air.
That flight is not about proving the engine can make thrust. It is about everything around it.
Airbus has said the tests will look at the engine's aerodynamic performance,
its noise, and the way it interacts with the aircraft,
including the flaps and slats on the wing during takeoff and landing.
Before that day comes, there is still a long list of work.
The wind tunnel work started with high-speed tests at ONRA in early 2024,
followed by low-speed tests at the DNW facility between September and November that year.
Airbus and CFM have logged more than 500 hours of wind tunnel testing,
using scale models as small as one-fourteenth of a full aircraft.
Full aircraft model tests were planned for 2026 at the French aerospace lab ONRA
and at Airbus in Filton, England.
But even that flight date has moved. And that is where the story stops being about an engine
and starts being about a company's biggest decision in a generation.
Airbus builds new airliners rarely.
The last time it launched an all-new aircraft program was the A350 XWB in 2006.
By the time it launches the successor to the A320 family, the gap will be well over two decades.
For a company that sells most of its jets in the single-aisle market,
choosing the engine for that successor may be the most important call it makes for decades.
For a while, the open fan looked like the favorite.
Airbus chose CFM as its partner for the A380 flight test,
put the engine at the center of its studies for the next single-aisle jet,
and talked openly about how a long, thin wing and an open fan could work together.
The plan, reported in 2025, was to decide on the engine around 2027 or 2028,
launch the program around 2030, and put the aircraft into service around 2038.
Then two things changed.
The first was the schedule.
Engine flight testing on the A380 was supposed to begin in 2027.
Industry analysts at Lehom News reported in May 2026 that it was now not expected before 2029,
which makes a program launch before 2031 unlikely.
GE, for its part, still talks about 2035 as a target for the open fan to enter service.
Even GE is hedging, though.
Alongside the open fan, it is developing a more conventional ducted alternative
in case the radical design cannot hit its targets in time.
Every year the dates slip.
The conventional alternatives get another year to improve.
The second change happened inside Airbus.
The executive who ran Airbus' commercial aircraft business,
and had been one of the open fan's strongest champions, retired at the end of 2025.
His successor took over on January 1, 2026, and he came from MTU Aero Engines in Germany.
Analysts quickly pointed out that his views were seen as closer to Pratt's,
favoring an evolved geared turbofan over a radical new architecture.
Nobody outside the company knows how that will shape the final decision.
But a change at the very top, in the middle of the most important engine decision Airbus faces,
is exactly the kind of thing that keeps engine makers awake.
There is also a quieter detail that tells you how carefully Airbus is managing its risk.
In November 2025, Airbus said it saw a path to offering more than one engine
on the A320neo's successor, even if it picks an open fan design.
That matters, because Airbus has spent decades giving airlines a choice of engine on its single
aisle jets, and a single source engine on its most important aircraft
would leave it dependent on a single supplier.
Now to the last belief worth taking apart.
It is the idea that because this engine is a decade away, nothing about it matters today.
In 2026, the industry got a very direct reminder of why it matters.
After the Strait of Hormuz was closed in the spring, jet fuel prices surged.
By late September, Leham News reported that jet fuel had roughly doubled since January.
In June, the International Air Transport Association expected airlines to spend
about $350 billion on fuel in 2026, up from $252 billion the year before.
Fuel was expected to take 31.4% of airline operating costs, up from 25.4%.
The association cut its forecast for industry profit almost in half, to about $23 billion.
That works out to roughly $4.50 of profit per passenger,
half of what airlines made per passenger in 2025.
When fuel takes almost a third of every dollar an airline spends,
an engine that burns more than 20% less stops being a distant engineering goal.
It becomes a number on a spreadsheet that every airline finance team can calculate.
That is the real pressure behind this engine.
It is not that it exists today.
It is that every fuel shock makes the gap between today's engines and tomorrow's look more expensive.
But the airlines have a counter-argument too, and it is a sharp one.
The current generation of narrowbodies, the A320neo and the 737 MAX, cut fuel costs by around 15%.
According to Leham News, much of that saving was eaten up by higher engine maintenance costs.
Airlines have learned the hard way that a fuel number on paper
is not the same as money in the bank.
That is why some of them are in no hurry at all.
The chief executive of Ryanair, one of the biggest airline groups in Europe,
has said he does not expect a need for a new jet program until probably the end of the 2040s.
So which way does it go?
Do you think Airbus will still pick the open fan when the decision finally comes?
Or will the safer path win again?
Here is what to watch.
First, the full aircraft model tests and the ground testing of the full-size engine,
which will show whether the noise and efficiency numbers hold up outside the wind tunnel.
Then the A380 flights from Toulouse, now expected toward the end of the decade,
which will be the first real proof of how an open fan behaves on an airliner wing.
After that comes the decision that matters most,
the engine choice for the next Airbus single aisle.
With a program launch that now looks more likely in the early 2030s than in 2030 itself.
On the other side of the bet, Pratt & Whitney will keep refining its second-generation
geared turbofan for a 2040 service entry.
And Rolls-Royce will keep pushing the ultrafan toward a narrowbody it can call its own again.
GE and Safran will keep chasing their 2035 target.
Somewhere in that sequence, one of those camps will be proven right.
The engine makers know it, the airframers know it,
and the airlines buying thousands of jets know it.
That is why an engine that has not carried a single passenger is already pulling serious
research money, reshaping strategies, and forcing every company in this industry to choose a side.
Over the next five years, the flight tests will start to show which side chose well.
