-The BEST Balisong Flipper is Now MAKING Knives!! - Lovins Customs at Blade Show 2022.

Sketching Life
20 followers
8 Video Views·Nov 15, 2022
What's up guys and welcome to another video.
In today's video, we're at Blade Show again,
but this time we're talking to a very special person
over at the Smoky Mountain Knife Works booth,
and that would be the Blade 2019 Champion, Corbin.
Thank you, sir.
Thank you for talking to me today.
No problem.
So you've been making something a little special,
haven't you?
Yeah, I thought, well, flipping isn't enough,
I'll go ahead and make some.
And that's the hole we all eventually fall into, I think.
You wanna go deeper and that's one way to do it.
So what have you got here?
What have you done?
So this is Strix.
I've been working on it for about three years now,
designing, and the hard part is this is all handmade.
So when I'm working with balances, tolerances,
I have to make some in order to find out
where that needs to be.
And finally, I am happy with the balance.
I'm getting there on the tolerances.
I'm happy with the weight, we set at 4.7 ounces.
Jerry Hom told me, make something that you like
and others will follow.
So this is my dream.
That's a really good bit of advice from Jerry.
I think that that's a very, very true thing.
In fact, that's kind of what we did
with the YouTube channel.
I've been into the balisong hobby for forever
and I was just like, I don't know,
I can make videos about that.
Yeah, you're the most famous balisong guy.
Well, thank you.
Yeah.
Yeah, says the guy in the Wired video.
Four million views, who's counting?
Dude, okay, so with these guys,
what was your vision in terms of the design?
Like, feel free to pick them up and show it off.
I'd love to see what your process was.
So everyone knows a rep is my favorite knife,
but I wanted one that had the symmetry of a rep
without the G10 having titanium.
I'll do G10 in the future, but I wanted titanium.
Adam Heibel has been a very good mentor to me.
So everything that I have done has been him teaching me,
doing the titanium handles, learning to mill.
All this is done on a manual mill,
learning that at a time and then learning countersinking
and learning channel gaps.
So it's just a little bit farther.
So if you do have play, it doesn't tap.
Doing different finishes like anodization,
two-tone, having an acid wash blade.
It's all things that Adam has taught me
that I wanted in my knife.
I wanted something, I'm a flipper first,
so I wanted something that I would enjoy flipping,
but also things that people could afford
that they would enjoy flipping as well.
So Seth Lanier actually catted this out
and then Heibel and I made it.
Heibel has taught me like, how do you get it so clean?
He's taught me to grind
and make sure my grind lines are straight,
my plunges are straight.
And so these are all, are these all manually made
or are these made on a CNC machine?
These are manually made start to finish.
So I take each piece and I surface grind it on the blades.
I grind all the blades by hand, round the handles by hand,
bushings are done by hand, the whole thing, all of it.
Do you mind if I hold one?
Go ahead.
Oh, okay, I've not actually gotten to touch this yet.
There's some intricate stuff happening
on the inside of the handles too.
Yes, so something that I wanted,
I didn't want the handles to be too heavy,
especially having a swedge on the blade
and taking a lot off.
So I actually go 75 thousandths deep,
which is about half the handle
and mill out the inside of the handle.
Wow, okay.
So I'm gonna be honest
before I even try to flip this real quick.
One of my concerns looking at it was,
oh, that looks pretty heavy.
Oh man, now you've got me excited.
Okay.
Oh, wow.
All right, I'm gonna bring it away from the glass here.
One second.
Yeah, full video mode, there we go.
Get real in there with the B roll.
I gotta make the dumb faces and everything.
Dude.
It does not sound like I thought it would.
No, it doesn't.
That's a good thing.
Yeah, no, it sounds weird.
Can you say that for the audience?
That does not sound like I thought it would
and that's a good thing.
Yeah.
Yeah, it's very quiet.
So the reason that is, is I scotch brite the handles,
which is like for an orange peel finish,
you want a wire wheel, but if you do a scotch brite finish,
that's why the handles are so soft on the sides.
Yeah.
And then also it kind of eats at the sound.
So it'll clack, but it's not as loud
because of that scotch brite.
Okay, so real quick, I'm gonna do a ASMR of this
because I wanna hear it for the viewers at home
so they can hear how quiet this thing is.
It's genuinely so much quieter than you'd expect
and I really like, it's almost a sleeper balisong.
Yeah.
Yeah, so this, I have a serif and I have the,
here we go, ready?
Like that, that is just almost silent.
Like that's loud, you know?
Yeah.
I mean, you don't wanna be sitting in like your bedroom
and your sister texts you and go, hey, can you not flip?
Yeah, can you be quiet please?
Yeah, yeah.
That's so cool.
Okay, how long of a process has this been?
Because you weren't a maker before, right?
Right, so I've always been a flipper.
I'm a flipper first.
I wanted to put my mark on the community
and that was before I had all the success in flipping.
So I've been working on this design since 2018.
So I was two years into flipping
and I've been working on this design since then
and the first one was made three years ago last week.
Dude, holy crap, that is so cool.
Wow, so what's the difference
in terms of these two right here?
I see this looks like it's got an acid edge
and then like a dual tone.
Yes, so the dual tone finish,
we just anodized it purple
and then went 400 grit on the top
and just take that anodize off
and then all the body screws are all polished by hand.
I put them in the mill and then polish them off
with 120, 220 and then 600 grit sandpaper.
God, that is so much work, wow.
I love to see this kind of stuff
because I love to see a fully handmade piece.
I honestly legitimately didn't know
that you were making these completely by hand.
That is so impressive to me
and it's stuff like that
where I was saying to,
in one of our previous videos,
we actually talked directly to Hybel
and like I was saying how this kind of stuff,
when you have this immaculate machining work
where you've got these beautiful holes
that are all matched perfectly across all four handles,
that takes a lot of effort
and a lot of time to precisely do each one of those.
So that's really cool to see
and you're hand grinding all of these as well.
Yeah, so I have tremors so I don't freehand,
I jig grind but that is a skill in itself.
I mean, using an eight inch wheel
and I have to get it to where I want
and then just stay there
and if it's not big enough, so be it.
Wow, that's wild, dude.
What inspired this blade design?
I really like this kind of weird tanto thing
you've got going on.
Yeah, so I am in love with tantos.
I've always have been,
everyone knows I'm a tanto fanboy.
I actually talked to Ballibalistic one time
and I said, I love your Arashi blade.
Yeah.
I was like, I wanna do my own take on it
and he goes, I would love to see that.
Dude.
So I was like, I'll do my own take on the Arashi.
I went exactly one inch out
and then did my swedge halfway
and then left one 30 second
in between my bevel and my swedge.
That's so cool looking.
Yeah, I can actually see it
now that you bring it up, the Arashi
and I really like your homage to it here, so.
That is so cool.
And that is my all time grail.
Really?
Yeah, so I talked to Sean and I said,
if you ever make another Mokutai Arashi, I need it.
Yeah, absolutely.
You've got these here.
Are you selling them with Smoky Mountain Knife Works?
That's how it's going?
Yeah, so actually it's crazy.
Strix is going production.
So in six to eight months, we will have 400 units
and they will all be sold
as Smoky Mountain Knife Works is the exclusive dealer.
As I have been going there over the last six months,
I see that they really care about the balisong community.
That is so cool.
So these are going to become production balisong.
Yes, so exactly how they flip right now
using the same screws, same pieces,
except the production will be hidden Zen pins.
That's what's really going to dial in my tolerances.
That's going to be cool.
It's going to be pretty
because actually the thought process for the handles,
I was like, what do I do?
I was talking to Jeff Dumas and I was like,
I know your X10 is your name in Morse code.
And I went, name in Morse code.
I was like, it's C-A-L.
But the cool thing about C-A-L
is it's completely symmetrical.
Corbin Allen Lovins is completely symmetrical here.
This is C counting the pivot.
This is A and then L is this going down.
I love to see it here.
Honestly, I had no idea.
I've seen a couple where I've been like,
is that Morse code?
This one is actually really well hidden.
That is so cool.
Thank you, thank you.
Yeah, and it was just crazy.
It was symmetrical and I thought might as well.
It's very easy to do on a manual mill.
So I had to.
What I love to see,
and this is something that's been really interesting to me
as I watch different people get into designing,
like MachineWise and a lot of the other recent designers
that have come into the game
is seeing how everybody has their own take
on what a balisong can and should be, right?
This is very obviously something
you've put a lot of work into and love into.
You can see your own self in it in a way.
Yeah.
And I think that's so cool.
I love seeing everybody's different take on things
from Adam to Jerry to Squid.
Like everybody's really got their own personal take
and what you've got here is very much you.
So. I greatly appreciate it.
The cool thing about it is we're gonna shoot
for the 400 to $450 range.
Like I said.
What?
These customs are actually $600.
Shut up.
Yep.
And this is $600.
That is $600.
And the reason why I'm not like a big name as a maker.
Yeah.
And at the same time, like I said, I'm a flipper first.
I will be open and honest with all your followers.
The materials cost me $325.
So the other 275 is all my time put in making this.
That's all effort.
Yeah.
So it's cause I love the hobby.
I wanna give people things that like they're gonna enjoy.
Yeah.
So I put my heart and soul into every one of these.
Every one is about 24 hours to 30 hours to make.
Oh my God.
That's barely like $10 an hour.
Yeah.
That you're giving yourself there.
Yeah.
Dude.
I mean, my fiance works weekends.
I might as well do something.
Hey, that's fair, dude.
That is a ton of work.
I cannot believe that you've put it at that price.
That's awesome.
And I'm very, very excited to see these going
on Smoky Mountain as a production piece.
Yeah.
It's gonna be crazy.
As a production piece, I can really make it what I want.
So I can do texturing.
I can do inside milling to make it weigh a little less.
I could make the handles a little thinner
to make it weigh less.
Like obviously when I started,
everything was like 5.5 ounces down to 4.7
was like the sweet spot.
And now since Switch started.
It's down.
It's crazy.
The Tsunami is wild.
Like the first time that I still remember
back when he released the Tsunami
and people were like, that's too light.
And he did the, my guy trust me on Reddit.
I was like, okay.
And I tried it for the first time.
It's like, it's wild to see the community move
in these different ways
where all of the different preferences
that are possible have been accounted for now.
Like, you know, obviously there's still more
for us to do in the future
but everybody is making such unique pieces
that you've got the spectrum, the gamut covered
from really handle bias to blade biased.
If you really want that.
Yeah.
Everything in between.
It's magical.
I mean, it's crazy.
Heat, Heat Industries has one
where you can move the spacers.
I got to play with that thing.
It was so cool.
It's so cool.
Travis, I got to review it
and I thought this is innovation.
Yeah.
And then you think of all the stuff with Cerrone.
Yes.
And the ink in the blade to simulate a cut.
The innovation that I keep seeing is amazing.
So dude, thank you for this.
No problem.
You are really just kind of a good part
of the Balisong community
in the terms of both your history as a flipper
and also what you're doing here now as a maker.
So I cannot thank you enough.
I greatly appreciate it to do a video
with the most famous YouTuber and a good friend.
We've been friends for a while.
Yes, we have.
I mean, God, I really appreciate it.
This is so exciting.
I had no idea about the production part.
That is wildly exciting.
It has been a very hard secret to keep.
I bet dude.
Yeah.
Holy cow.
Well, now everybody knows and that's exciting.
So thank you so much.
And I'm sure I'll see you a bit later.
Yes, sir.
Thank you.
Have a good Blade Show, man.
Yes, you too.
Wow.
What's up guys?
And welcome to the outro.
Okay, so that was really incredible.
Corbin showed us some amazing stuff.
And now here at Blade Show 2022,
things are winding down on Saturday.
So thank you guys so much for watching.
Huge thank you to Corbin and Smoky Mountain Knife Works
for showing us such incredible stuff.
I am genuinely so excited to see the production version
of that Balisong.
He said that it's coming relatively soon.
So I'm hoping we can produce a full review of that
when the time comes.
But for now, we're gonna keep moving on
and seeing what else we can get you here at the show.
But yeah, that's pretty much it for the moment.
Once again, I wanna give a huge thank you
to our Patreon supporters.
You guys are the best and help us
in doing this kind of stuff
because all the equipment and crap
that we're lugging around is heavy.
It's very heavy.
And knowing that we have your money makes it all better.
That's where the money is.
That's the money's in this.
The money's in this.
Oh, well, yeah, the money's in this too.
