Tailor A Suit Jacket In 4 Minutes! (PRO TUTORIAL)

Anthony Rivera
67 followers
10 Video Views·Dec 3, 2022
Got a suit jacket that you want to fit you better but you don't want to pay a
tailor? Yeah let's make it happen. It's beginner
friendly and I don't like long intros. Let's do this.
Lay your jacket down, smooth it out, and let's talk about our plan of attack.
It's these two side seams right here. We're gonna alter these and in the event
that you want to alter the center seam as well, well
you can do that but there's no need to do that on this jacket because it fits
the middle of my back just fine. Some jackets have multiple additional
seams like these two seams on the side and the front of the jacket but altering
these two is unnecessary on this jacket but
if you want to go ahead. Let's flip our jacket inside
out and as you can see well there's no lining on this but in the event that
there was some lining just cut a hole in the bottom of that
lining, flip your jacket inside out, and then
handle all of your business. Easy peasy. We're gonna grab this side
seam first right here and flip it on its side and
what we're essentially going to do is put a double-sided tapered straight
stitch on this seam meaning it's gonna gradually go in and then gradually
go back out like this. That's kind of a mouthful I know. That's
what she said. I'm SD and if you're new I show guys like
you how to tailor their own clothes at home so if that sounds interesting to
you be sure to click that subscribe button down below.
Dress shirt darts for example are a single-sided tapered straight stitch
meaning only one side gradually moves back out towards that edge.
The other side it's just it's straight there's no tapering at all.
What we're gonna do is we're gonna put two sewing pins four
inches from the very edge of our seams. The space between those two pins is nine
inches and I want the widest part of my dart to be right in the middle so
I'm gonna put a sewing pin right there at five and a half inches.
In order to get a nice gradual taper I'm gonna put my bottom pin
at a quarter of an inch and the middle pin is gonna be
one inch and then the very top pin is a quarter of an inch again. To make it more
gradual I'm putting more pins in between there
and about a half of an inch. Oh and uh repeat all those steps
for the other side of your side seam too. These are what our pinned up side seams
look like. Do yours look like mine? Yeah? All right
good. That vertical green pin at the bottom is
where I'm gonna start my stitch. That's where my original stitch it
starts to flatten out and then just follow along that gradual taper right
there. If you've never used a sewing machine
before don't panic it's all good we're just making a straight stitch that's
it. As far as the settings go we're making
a straight stitch it's set at 2.5 or 2.5 millimeters in length and
the stitch width well it's n-a because it only applies to another stitch which
we aren't even making in this tutorial. Line up your machine under that first
vertical pin where you decided to start your stitch and go
slow.
This right here is the inside of our jacket with a nice
gradual flattering taper and I used contrasting threads so
that you can see what I'm doing. You're welcome I got your back. And take a look
between my fingers right there. There's a
minor hiccup but nothing bad at all not a big deal at all.
Yeah how about that galaxy s10 camera quality huh?
No need to cut anything this is the outside little does anybody know that
you spent like 20 minutes doing this yourself.
Now let's go learn how to tailor a dress shirt to go perfectly with this jacket
it's in the end card I'll see you on the other side SD out deuces.
