Discover the art of creating a beautiful stacked bob haircut! This step-by-step tutorial demonstrates how to cut a classic bob with an elegant angled shape, graduated layers, and a perfectly balanced silhouette.
Learn professional haircutting techniques to create volume at the back, a smooth graduation, and longer, stylish front sections. This versatile hairstyle is perfect for anyone who loves a sophisticated, modern, and timeless look.
Whether you're a professional hairstylist or a hair enthusiast, this tutorial will inspire your next haircut transformation!
Hey guys, welcome to my channel. I'm Summer for those that are new.
Today's video I'm going to be doing a stacked bob tutorial.
I love cutting bobs. It's probably my favorite haircut to do in salon.
I always find them so enjoyable.
And today I'm specifically just going to be doing your classic.
With a stack in the back
and an angle going towards the front there's different variations
but this one is your classic tried
and true one that everyone should know how to thoroughly do
before moving into any of the different variations of a bob.
So we're just gonna go ahead and get started
Okay. So sectioning is one of the most important things
with doing really any haircut,
but specifically with a bob, you want very nice,
clean, straight lines. You're obviously
going to start off by sectioning off
your front pieces from the ear forward.
So you like to try to, you want to be behind the ear,
not in front of it and just push everything
going forward. And if you have to readjust
your section, you obviously can.
I feel like that's pretty good though.
So I'm just gonna take that
and clip it up nice and tight
and out of the way.
And we're gonna do the same on the other side.
Okay, so now that I have my front sections clipped off,
Really, placement of where you're gonna bring your angle up,
you wanna kind of establish before you section the back.
Usually, on a client, I'll feel through
to see where their occipital bone is.
Obviously, with a mannequin, it's a little bit different.
It's not as prominent.
But you don't really wanna stack higher
than where the occipital bone is at the base,
so basically where the curve of their head is.
So kind of feel through with your fingers,
which really, in general, it kinda meets.
Like just under the tip of their head
so you can always use that as a guide as well.
And then so I'll just go basically in that area
and I like to take that section
and clip all
of that up as kind
of my guide as to where
to stop my stack.
Okay. So now that you've established that,
I just like to still take kind of multiple sections
with the back. It just makes the stacking part easier.
And I like to use duckbill clips for this
part. I feel like it just secures the hair
and a little bit better and they're not quite as bulky
as your bigger ones, but the bigger ones are great for a whole section.
So I like to just kind of
split it in the middle, keeps it nice and clean that way.
And then I just will do kind of like
Like my first top one to get that up out of the way.
And always have your client looking down.
It's easiest and it helps the angle flow better too.
Usually once I get to their occipital bone,
I'll tell them that they can go ahead and look normal.
But while you're creating that stack,
you want their head
to be looking down.
Okay, so now we have her all sectioned off
and now we're gonna actually get into cutting,
which is very exciting.
So like I said, you're gonna have your client looking down
or you don't want them like all the way fully down,
but enough that there is that angle.
And I just like to start off right
in the middle to kind of create my guide,
and then I go
from there.
Obviously
you want to
keep the hair
nice and wet,
so re-spray if you need to.
Hair is drying a little bit faster than I anticipated.
Okay so now that I have created my first guideline here,
part of creating that stack is you want to
make sure you're bringing your next section out
as close to a 90 degree angle as possible.
You don't want to over direct it, you don't want it too low,
you want to bring it out like I said
close to that 90 degree angle
so that way that is what creates the stack and the angle in and
of itself. You want to make sure your sections
are thin enough that you can see through.
To what's underneath. If it's too thick,
you're going to lose your guide.
But one thing you can always do is lift the hair
To see what's poking out if you feel like you're second guessing where
your guide is you can always do that to find it
So i'm going to pull it out
Lift up just to make sure
And then cut
and then one thing too.
You want to also move your body?
With where you're cutting.
So when you're in the center, you wanna be in the center.
When you're moving to the left,
you wanna adjust to the left and same with the right.
That way you're pulling your hair out
at the appropriate angle.
You're not over directing it to one side
or coming out with it too much.
So that way you keep, like I said,
those nice clean lines, even section,
and that's what's also gonna help create the shape.
And then obviously if you see,
You're not cutting even you just as you go you can easily fix that.
So you can see right there where I left
that out too much and you just go in
and cut it off. You don't want
to overthink it you know you feel like if you're not doing
everything perfect that's the beauty of it.
As you go you just easily can match up your points
to make sure
everything
is meeting.
Move your body
with each area.
You don't have to go past the second knuckle.
I mean, they teach you that in hair school,
nine out of 10 times you don't listen,
but it is very beneficial if you do.
Stick with pulling it out as close
to 90 degrees as possible.
I feel like that's a lot of times
a lot of people's problems with bobs.
They don't pull it out high enough to create that stack
and you end up kind of with just...
Like a layered haircut almost.
I mean a lot of people don't want a tight stack but if you're
trying to do an actual real bob you need
to make sure you're pulling that out to create
the angle in the stack otherwise you're just having a layered haircut.
Okay as I go I
like to take my corners
and I'll pull them to the center to make sure that they're meeting up
that one side's not longer than the other
that way I'm keeping an even flow as I go up.
And it just helps make it easier along
the way rather than once you get fully done
and you're like I'm totally lopsided on one side you got
to go back in and reshape everything.
As you move up it you want to continually check.
Do it about every other section.
One thing with clients
and apparently
mannequins usually
on the very bottom
hairline especially in the corners there will
be pieces that like to just poke out so
I'll touch on that more when we get to the dry cutting
but usually I find with the very bottom
of the perimeter you always have to keep going back in sometimes
and just nipping away hairs
have a mind of its own it's frustrating
but so just don't be down on yourself if you see that
that's something happening with you it's
not you necessarily it's always sometimes just the client's hair
Okay so now that I'm to her section kind
of along her occipital bone that I clipped up,
I'm gonna do one last final section to create a little bit of my stack.
We'll touch on how to go about the rest of the cut after that.
So I can tell by looking
at her and feeling she
for whatever reason
is staying longer
on this side.
So as I check and see right down yep right
down here there we go so see all that.
Okay, so now that we've created most of our stack,
because like I said, you don't wanna go too far
over her occipital bone, what you will do then
is you're just gonna bring down as you section
your next pieces, instead of directing them
at a 90 degree angle, you're just gonna bring them down
and meet
them.
And again, if you need to wet your client's hair again,
always just get out your spray bottle.
You wanna kinda keep each section even as far
as the saturation goes on the hair.
So instead
of bringing this
out I'm just gonna
bring it down and
meet at that line.
It's okay
to still have some sort of a light angle you just
don't want it like you don't want it completely
flat but bring it out a little bit just
not where you're fully pulling it out so I don't know what
that angle would be called.
Definitely not a 90, 45 degree or somewhere in the middle.
Okay, so now that I've created my stack,
I don't like to do any further like pinpoint cutting
on the bottom until after I get it dry.
A big part of cutting bobs is you spend,
sometimes half of your haircut is dry cutting.
Dry cutting is where you're gonna really perfect your line,
perfect the flow of it.
So if you have a client that wants a bob
and they don't wanna blow dry,
tell them they don't have an option.
You always will need to do dry cutting with a bob
to finalize the shape.
So the way I like to cut my layers with it,
I don't really like a lot of layers in a bob.
I like it to just be sort of soft flow.
You've got to create some layers so you're taking out
the weight from here. But I don't like to do a lot of layering.
So how I do my layers.
So to do my layers the way that I do it,
I just take starting from the middle,
I bring everything up and where
my last piece falls out, I just cut up from there.
Continue to do that all the way through.
So this just creates a softness from the weight
to where like your angle meets the top.
And then like I said, when I do my dry cutting
is when I really kind of more so get in here
and create more softness to it.
Now, if somebody has a ton of hair,
you surely, yeah, you can go in and do more layering.
This is just what I prefer to do.
I think it creates a nice soft shape
without too much
like movement,
but you have enough.
You can already see a little bit of the line
start to
form with
her angle.
Now that I've done that,
I will just take my final top section.
Again, try to keep those sections,
the line nice and straight,
bring it all up and
then even out that top.
And we'll leave it for now until we dry
and do our dry cutting.
Okay, so now we're gonna move on to the sides,
which you can see
her angle forming here.
So this is going to be your guide,
this longest piece in the front to create the angle for your
sides. So to take your first section,
you don't want to just bring this all down and cut it down
because what happens is if you don't cut
a perfectly straight line you're just going to
keep cutting and cutting and cutting
and you're going to lose the angle. So always take multiple
sections for the sides even if you think you don't need to,
even if your client has really fine thin
Thin hair, take multiple sections.
And I always like to take the section kind of angled down
because that is going to be the direction you're cutting.
So it just makes more sense.
This part
is personal preference.
I prefer my clients to just look normal.
Some stylists will have their clients looking down.
I don't like to have them look down
because you lose the way the hair just naturally falls
when you're looking straight up.
Nobody walks around with their head down.
It's just not realistic.
So I always cut with them looking just normal.
So like I said your guide is going to be your longest piece
right here. So you're going to take from that and just go straight
down. Take it you're going to angle your finger down
and take
your next
section over.
Again don't
forget to
re-spray your
section if the hair is too dry you want the same saturation
everywhere
evenly.
Bring
it down,
angle
it.
Our angle going forward and then I layer my front
and sides the same way that I do the back by
bringing everything up and I over direct it back just ever so slightly.
I personally don't like to
take a lot of weight from the front.
I don't like a lot of layers in the front. I feel like it takes
away from the standard classic look of a bob.
Again if somebody has a ton of hair you can do
more layers but overall I like to keep it very simple.
By just removing a little bit
of weight without doing too many layers. So
again, I'm gonna go up
but also direct it back.
And honestly sometimes
I'll even wait to do
that last piece until after it's dried
and I can see how it's laying because
The thing is, especially with people with finer hair,
this is true with my hair. I can't do really
any layers in the front. I have no weight.
So if somebody accidentally takes it off, it's gone.
And I either have to put extensions in or grow it out.
So a lot of times with finer hair,
I don't like to really do it.
I'll go through the motion of it to see what that's going to take out.
So like for her right now, it would be taking out this little bit.
That probably is fine, but I'm going
to wait to do it until I have it dry.
And then I'll just sometimes go back through
and do it
at a little bit less
of an angle and cut in.
Repeat the same on the other side.
So for doing the second side,
you wanna do the same type of sectioning.
Never just have this down and shoot it straight down.
You wanna do multiple sections
so you're getting a nice, clean haircut
and you're not taking off too much.
This is the thing, with some hair types,
if you cut this too short or angle it at not enough angle,
you can correct it.
With the rest of the hair a lot of the times.
So that's why sectioning is key. So again we're
going to bring it down. This is your guide right here
and you're going to bring it to that angle
your hand down and cut.
And then again I'm just
going to repeat doing
my layers
the same way on
this side as I did the others and the back by going up
and over directing it back away from her
Okay, before I move on to my front,
this can be done either way.
You can either check your front first
or you can check your layers on the top of the head.
I'm just gonna go ahead and check the layers
on the top of the head.
What I do is I just go and bring everything up.
I leave out kind of this front little section,
which would be kind of like where her weight
needs to stay around her face.
And I just bring the rest,
keep going with a nice line,
bring it up and just slightly back.
to see where it meets
and then just cut that take
to check that and lightly just cut
into that very top
so now that i have finished fully cutting basically
the whole haircut what i'm going
to do is check her front pieces here to make sure
that they line up before i go into drying it so
what i like to do to check my front piece you'll
just stand directly in front of your client
and you're just going to match up each side
and go through so you'll want to do that which i'm going
to do that now okay so you want to make
sure that their head is straight first of all
and then i just kind of will lightly squat down low
so i can see or pump them up whichever one
and then i'm just going to go through and see how
it lines up for the most part i'll do key points
so i'll try to grab around their ear
because that's a good guide for both sides
and i pull it forward to see what is missing
to angle this a little bit more.
And another way you can check it too
is by standing behind your client
and pulling it back. And you can always
also use your mirror.
Okay, so now that I've kind of overall
checked when it's wet, sometimes you
don't want to overthink checking when it's wet just
So like I said, you spend a lot of time,
because the hair does lay different dry.
sometimes with a bob, dry cutting.
So I'm gonna go ahead and get her styled now,
and then we'll go in and really perfect it
where it needs to.
Okay, so for her styling products,
I'm going to use Moroccanoil Concentrate Smoothing Oil.
Love this stuff.
One to two pumps, probably only one on her hair.
And then I love Provanas Polish and Reunite.
This is a split end mender.
Mannequin head is crap all the time anyways,
but on human hair, this stuff is truly amazing
for any clients that have severe damage on their ends.
It really seals in the ends, takes away any of that frayed look.
You can do it wet and then you can do a little bit on the ends
when it's dry too. Love, love, love this stuff. Anti-humidity as well.
One thing I want to mention before I do like the full full blow dry
when I blow dry I don't like to
separate my sides from the back like this.
I feel like it creates a little bit of a crease
and then sometimes when you're doing
your dry cutting it kind of leaves the hair being
separated here which just makes it
a little bit more difficult. So I like to just do
multiple sections going fully around
the head rather than separating it here.
Okay, so now she is fully dry
and I did flat iron her a little bit, I forgot how.
Non-cooperative mannequin hair can be.
So this is her from her front angle and then I want to show
you guys the sides before I cut into it to show you guys
the importance of dry cutting with bobs.
Any haircut really but especially with bobs.
So as you can see we've got our angle in here working
it obviously needs a little bit of tweaking
but the biggest problem that happens with a lot of bobs
This was happening a little bit while I was cutting.
I'll show you the back.
You guys gotta stay with me when you see the back.
So the problem is sometimes you get
these little baby hairs underneath that want to pop out. This
happens on clients. I almost wanted to like go
in and critique this before I showed you guys just
because it looks so ugly. But the truth
is this is what happens a lot of times with a lot of bobs.
The bottom always pokes out and it's so annoying.
You always have to go back in and clean it up. But
But I wanted you guys to see.
So see it already throws off the whole look of the haircut.
And especially on this side too, but what's great is that shows you,
all you have to do is just go in and clean that up.
And then I'm going to touch on also how we're going
to clean up her layers and the thickness in here.
you can go ahead and do some of these steps
and i'm going to show you all dry cutting while it's
still wet as well but i like to do a lot of it dry cutting just
because you really get to see how the
hair lays and i feel like you have more control
over it rather than it's wet if you take it too
far when it's wet there's no correcting it
so i like to do a dry that's just my personal preference
everything that i'm going to do dry cutting you still can
do somewhat when it's wet so you can
apply the same steps for when it's wet i just prefer
the dry cutting and i feel like it gives
Gives you the best end result.
Okay. So first things first,
we're going to get rid of this hideous little line poking out here.
So what I like to do is basically just follow along
with where the side angle is and just
curve it around with my scissor and comb. Okay.
So as I can see right here, this is poking out. So
I've got my guide here and my comb to kind of see,
and I'm just going to cut with my scissors
Scissors at a little bit of an angle.
Just gonna follow
that all
the way around.
So sometimes one of the most frustrating things
is doing the back.
It's precise.
I like to book all of my bobs an hour and a half appointment.
Some hair types, I like to take even two hours on them,
which might sound crazy to some of you,
but if you're really trying to do
a very thorough precision cut.
It takes the time. You have to see how the hair lays,
how it lays after you flat ironed it,
or if you're just blow drying it,
sometimes it kinks back up and then you always have these
guys that poke back out.
And this mannequin is being very stubborn, but just be patient with it.
Don't freak out and think you've done something wrong.
This is a lot of times just how the hair
goes when you're doing a bob.
Now I'm correcting this line
but this needs to be cut in a little bit more to create just a little
bit more of an angle where some
of these spots are poking out.
Sometimes we still have to do
multiple sections. Okay so now what I'm going
to do that I've cut along her line a little bit more
I'm just going to take my scissor over comb
and point cut into it to just lightly soften it.
And sometimes
you get a flat
iron as you go
if you get a kink.
And we're just gonna keep continuing up,
going scissor over comb.
So see where you can see this hair underneath
has fallen out and that's still out?
Just by cutting into that is what softens
and gives more of the angle.
If that makes sense, if I'm explaining that right,
hopefully
I am.
Okay, so now that I've cut more of her perimeter
in the back, I'm now gonna move into softening
this thick line right here.
So to do that, I'm first going to start with my texturizing shears
and I'm just going to go in
and out.
Scissors again.
And you can
also apply
scissor over comb.
I'm going
to take this
and you can see a little bit here where this is sticking out
and you're just going to go in
and point cut in.
So hopefully you can see
this on the camera. I'm not sure.
This hard line right
here, this is what I'm trying to blend in.
So I'm going to just keep going scissor over comb
Cut into that line.
All this, cut into that.
See this line?
This is your guide.
This comes out.
Continue to go up around
the head into the sides.
We're just kind of doing the
same thing I did before with the layers.
You're just correcting and softening.
When you're wanting to create softness in at the sides,
especially kind of right here in the ear,
it gets a little bulky,
you don't want to ever create a hole.
So one way to avoid that
when you're wanting to add some texture there,
bring it up, let this whole bottom half fall out,
and then you can just go in and do some deep point cutting.
And you don't have to worry about creating that hole
because you've got your base down here.
And kind of do that same thing all along the sides.
Just let your base, the perimeter fall out
so you keep
that weight.
Okay, so now that I have softened up this one side
pretty much how I'm liking the way that it's laying,
I'm just gonna go through and look at my sides
to make sure this is lining up well.
So anything that's out of place,
I'm just going to correct and get rid of
so that way we have a nice clean line.
I'm going to bring this up first,
cut that top and her front piece along her face.
I'm going to bring all the way back, see how that's laying.
And this is where with real clients
that sometimes you do need them to move their head.
I'll have them angle it this way,
look down a little bit for those hairs underneath that
sometimes still can be a little bit stubborn and poke out.
So don't be afraid to ask your client to move.
If they want a nice, clean, hard line,
sometimes they're going to have to move their head.
It just is what it is.
I'm just gonna do the same steps on this other side,
match up, even out my line,
and then I'm gonna check everything.
With bobs, you sometimes have to texturize
one side of the hair more than the other.
Hair grows in a pattern,
and sometimes something will look off with the length,
but a lot of times it can just be the thickness
that's throwing that off.
So you might have a spot that you're like why
is this looking longer on the one side and you go to
check it and it's not longer?
It's probably because you need to take a little bit more weight out of
that section. So one way you can check your front pieces
to make sure they're even is what I like to
do is I like to take kind of the top perimeter out
as if you had like your hair just up on the
top of your head and I'll clip it back
and this is a good way to see how these pieces line up
that you can check and that's
also a good way to tell if something is thicker on one side than the
other so this is how i'll get right up
in the client's face squat down however you need to to
see if it's matching up on both sides
and like i said if you need to texturize one side over the
other sometimes your client's hair depending
on how it's laying can pop up on one side
and it'll throw you off so that's where
when you take this up and you're pulling
down on those pieces to have them meet
is a good way to tell if they're even or not
Okay guys, so there you have it.
This is my end result of my bob of the way that I like to cut
to achieve my stacked bobs.
As you can see, we've got nice clean lines along her hair. I don't like
to do a ton of layering,
but there's enough movement there in the hair that you can see
and it gives it a nice lived in look.
It also will show some shape when you curl it, but these are
the steps that I always take.
Like I said, you can adjust if needed if you want to add more layers.
Go ahead and add more layers.
It all depends on your client's hair
and what they're also wanting for their end result.
Bobs take time and precision.
So if you are new into hairstyling
or if you're just starting out in school,
a bob is one of the more difficult haircuts, I would say.
So.
Go out get a mannequin and practice makes perfect
so you need to be very precise. Like I said key
things are clean lines, plenty of sections,
and you always want to do smaller sections than two
bigger ones that way you don't lose your guidelines.
So if you guys have any questions at all please
leave a comment below I would be happy to answer them.
I hope you enjoyed my technique and like I
said you can always tweak
and adjust if you need to this is just how I like to do my bobs.
Practice makes perfect and I still feel like there's always
something I can still work on and critique with my bobs
So hope you guys enjoy the video.
Like I said before go ahead. Give this a thumbs up
Please subscribe if you haven't already and I will see you guys soon