The video documents the restoration and modification of a 2015 Mercedes-Benz GLK 250 diesel with a broken rear axle. The creator details the process of unloading the vehicle, sourcing replacement parts from a salvage yard, repairing the rear subframe, and planning aesthetic and performance upgrades including a lift kit and off-road wheels.
All right so here's our new little project 2015
GLK 250 diesel pretty low miles has a broken rear
axle so we couldn't really roll it off the the trailer
and the way they loaded it at the auction
was also a little bit weird we couldn't get the car off from the side
because the trailer itself
has uh sliding rails for the for the trailer to go up
and down so we would have to lift it
up pretty high and it would be even more sketchy
so we had to jackknife the trailer
and unload it from the front it was teeter-tottering just
a little bit but we got it done
and now we're gonna get to work so i was doing
some googling online looking for some wheels
and i found a glk that i really liked uh it was crashed
and i think it was also on a different
auction before and but i really liked how it looked
so i decided to find my own glk 250 diesel
and make it pretty much similar
to that now behind me is the finished product
I'm not going to show you the whole thing just yet,
but let's see what the damage was,
the things I had to do to it, mods we had to do, tires, wheels, lift,
and we'll see the final product.
2015 GLK 250 diesel. It has 75,000 miles on it.
This is the damage on the back. Not too bad.
Kind of wanted to try one of these,
do a little bit of a lift, maybe like an inch and a half or so.
Let's do some 17 inch wheels.
some off-roady tires and just kind of do a little fun project
so far not too bad so far so far like
it's a little bigger than my golf
inside is fairly clean and always
to spin it around how i need it now that i
can actually start working on it i'm gonna put it
on jacks lift it up take off the wheels and see what
damage we got
and these
metal caps
are so
annoying
basically
you got
a metal cap
that goes
over the
actual bolt and it has like a lip that goes like around it
so it doesn't slide off easily
but when you're actually using a tool to get them off
and when you try to get the socket off
if you get stuck in there actually removes it
didn't remove it right now but let's see if it
does it again there you go pops this off
then to get that off i'm using
a little hammer so anyways
i don't know german engineering
at its finest for no reason
almost off yeah there it goes so
basically we got this cap goes on here
for whatever i don't know decoration i guess to
Let's make it look shiny and chrome.
And then you have...
this bolt which works with this socket
so i mean it makes no sense to me but okay germany whatever
so i gotta remove these guys they're already removed
and it's starting to hail or rain
whatever this guy come on let it go
and then now these are the actual bolts without the covers
so i'll just use this why even use the covers
no idea we're not here to be pretty we're here to be
productive let's
see what we got here
nice oh come on what
is this florida
weather all right
and we're
And let's take a look at all the damages.
Alright guys, so here's the plan.
Now that I know what's damaged and I need what I need,
I end up looking on Pick and Pull,
which is a place where you go and pretty much pick your own parts
and take them off.
And I went to their website and actually had a GLK at Pick and Pull
and the next one was like in Oregon,
which is like, you know, whatever, 800 miles away.
So, honestly, I went to Pick and Pull,
which is kind of down the street,
And I got the whole...
Subframe for $300. Don't mind the mess.
Wife's van, flowers, all that stuff. So that's from the
flowers. I got to go to the cardboard place to dump that. But anyways,
got the whole thing with the diff, axles,
all the arms that I need, ABS wiring, calipers,
all that stuff. I don't need all this stuff.
The diff is actually off of a GLK 350, which is,
the ratio is different on these compared to the diesel.
Mine is, I forgot if it's, I believe mine
if i remember correctly i think
on the glk 250 diesel it's like maybe 340 and on the
on the gasoline one it's like 360
or something like that but anyways i don't need the diff i
just need the axle and arms from that side
so what i'm actually going to do on mine because
with genius german engineering i can't get to any of this stuff
so like this one for
example i can't get to this one i can't get to this one
Some on the bottom I can get
to but what I'm gonna do is I'm actually gonna
unbolt it and drop it down so I can get to that stuff.
I'm not gonna disconnect
the driveshaft or anything else.
I might have to remove the exhaust that might be
something yeah I think is gonna be in the way.
But hey maybe when I'm gonna
unbolt it we're gonna hear what it sounds like
with no mufflers. Alright I'm
gonna unbolt it real quick we're gonna
drop it down and see what we got.
To be honest, it sounds a lot like a golf.
Now pause.
All right
now that I
was able
to drop
the rear
subframe
down about
six to eight
inches
I can actually get to the to the bolts here
and start removing all the stuff that's damaged.
Lower control arm. Both lower control arms right here.
Remove that. Tie rods. And then I'm gonna
get this out of the van and start unbolting everything
that I need from that side and swap
All right, so I got everything in place now, bolted everything in.
Everything lined up pretty good.
I would get alignment done later after I do the lift but for
now I was basically worried to make sure
that everything is good lined up and ready to go.
On the back bumper here I'm gonna weld up this spot right here
then clean it up and just kind
of do a little patch paint job
and then try to clean up the bumper the best that I can.
I don't think you'll need to be repainted.
Seems like it's mostly scuff damage.
So we'll see how it turns out when I get to it and start cleaning.
All right, guys, thanks for watching,
and we'll see you on the next one.