Pulling The Engine Out Of My DESTROYED 2015 Ford Mustang Gt

Shaping Driving
83 followers
38 Video Views·Oct 20, 2022
Welcome back to the channel this building is moving really fast into days video we pull out the engine out of my 2015 Ford Mustang gt.
Follow me on instagram https://www.instagram.com/vtuned/
Credit: vTuned garage
What's going on guys welcome back to another video in today's video we're going to be focused on our
2015 mustang that we bought from the salvage auction with some serious frame damage on the
left side it does have a oil pan that is busted so we got a new one and we're going to be replacing
it today but i just want to address some of the comments you guys have been leaving thank you for
all the comments i love reading them i love replying to some of them so go ahead and keep
those coming but a lot of you guys were asking what we're actually going to be putting on the
old mustang we are going to be putting every single part that we possibly can from this car
on there like all the wiring harnesses we're going to put on there i also want to try to get the abs
on there the brake booster and the big brakes that this thing has it does have the performance
pack brakes because this is the 50th anniversary mustang which is pretty cool because they only
made 1964 of these cars which is pretty awesome i didn't even know it was a 50th anniversary until
it came to the shop but now let's go ahead and get this car on the lift and we'll swap out the
oil pan so we got the car moved into the lift area now we're going to go ahead and remove this door
right here just so whenever we get the oil pan off we can get inside and start the car up the
door off surprisingly the wires don't look like they're ripped so we can probably use that on our
other mustang set this aside now that we got the door off we can go ahead and just sit right here
and flintstone this car inside on the lift so we got the car pushed in here and i'm not really too
sure where to put these uh left arms but i guess we can just put them right here under the frame
well what's the left of the frame just try to stick it somewhere over here that's going to be safe
oh yeah that'll work and over here we're just going to put it back on the factory pinch weld
i think that should work it's not going to slip off right you might go ahead and throw some straps
on there too just to be safe so we got all the lift points secure on the mustang let's go ahead
and lift this thing up hopefully it doesn't fall off and cause some more damage because then we'll
have to put this thing back on the auction all right guys so we got the mustang nice and secure
in the air now let's go ahead and do a walk around underneath what we have here i did
notice that the subframe is a little bent right here but the good thing is these subframes are
pretty cheap and oh man we just found some rust right here time to chop this bad boy in half
but now let's go ahead and move on to the suspension we have some pretty good suspension
components over here as you can see the tire rod isn't bent that's usually the first thing that
bends on the suspension but everything looks pretty solid and check that out we actually have
an airbag uh suspension right there in the front and the rear that's gonna be really awesome we're
gonna put that on the 66 mustang now let's keep moving back we also notice that the subframe is
bent back here but most of the other components look like they're good like the steering looks
good nothing's broken over there and we are using everything from this car and the motor mounts on
the engine are actually broken that's why the oil pan is busted right here the entire motor shifted
forward and i guess it punctured it right there but the motor is looking good as you guys seen
in the last video it is not broken all the mounts are on so that's a pretty good thing and also if
we come to the back the transmission also we got really lucky with the transmission as you can see
this mount is just completely broken off from the car but it does bolt on right here so that is
awesome and it doesn't look like it's broken anywhere else by the drive shaft and the cool
thing is this car has a two-piece drive shaft and that's what kind of caused it to bend kind of like
a banana so it didn't break the transmission or the differential in the back but man just check
this out right here look at this damage i'm literally standing right where the driver sits
this is right where you would sit that is just insane oh my goodness but let's go ahead and keep
moving to the back of the car we do have a good fuel tank back here we might use this fuel tank
where we might just get a fuel cell but it's just good to have and the rear subframe doesn't look
too bad either all the control arms look nice and straight the rear differential also isn't broken as
you can see on these mounts right here everything is nice and solid so that's awesome that just
saves us time and money and we also have a airbag suspension in the back we do have one broken
sway sway bar link in the back that's all right there's nothing too major in here this
uh control arm right here might be bent but we won't know until we get this thing on the alignment
well until we get that car on the light machine but we might just get a new one and compare them
and see see how it is and also if we come to the back we have uh Ford Racing factory exhaust but
it is kind of bent up i think only this side is good this side is completely crushed and it has
a bunch of damage up there but now let's go ahead and lower this car down and get this motor out
so we got the car lowered down we're going to start off by just removing most of the front
and make sure there's nothing in the belts so let's go ahead and get everything off the front end
all right guys so we got everything off in the front and check out how bad this car is twisted
if you look at the left frame rail is completely pushed down this frame rail is pushed like this
and everything looks like it shifted back you can see right here everything is crunched up that is
just insane but now let's go ahead we're going to remove the subframe so we can get to the oil pan
so let's go ahead and get these wheels off so we did get the wheel off and check out these giant
brakes these are going on our 66 mustang because we are going to need some serious stopping power
because i'm planning on either doing twin turbo or supercharger go ahead and drop some comments
down below so we can go ahead and start searching for some parts because this build is going pretty
quick now let's go ahead and get these brake lines off and the abs line off we don't want
to rip anything because we are using everything so we got this entire side all disconnected let's
go do the other side we got both brake lines disconnected on both sides and the abs sensor
and we also went ahead and took off the air lines from the airbag system now we need to go ahead and
take off the front subframe so what we're going to do is we're going to jack up the motor in the
back i was thinking about securing it over here but that's not going to work out so we're actually
going to jack the motor up in the back drop the subframe down and replace the oil pan so the
steering is all disconnected and we went ahead and unscrewed both struts now we're going to
slide this jack under here and lower the subframe down after we unbolt it
so we got the subframe out of there and we just supported the engine with a jack right there
but we probably will run a nice strap that goes all the way along to the shock towers right here
just going to go under there to hold it and we're about to start replacing the
oil pan but check this out we got the suspension over here by the 66 mustang and man it almost
lines up it is a little bit too wide so either we'll do some adjusting on the arms right here
on the control arms or we'll do a nice little wide body on the car so now let's go ahead and
get the oil pan replaced on the mustang so here's the oil pan right here we actually bought this
from the dealer and it was actually really cheap it was like 70 dollars i was actually surprised
let's go ahead and check out what we got here there we go 5.0 oil pan and it actually came
with this oil sensor which is pretty cool this is built into it so let's go ahead and get this
thing on the car so we got the old oil pan off and check that out there's where it took a pretty
good impact right there but here's the new one right here hopefully it's the same and it looks
exactly the same so let's go ahead and get this thing on pan nice and secure on the car now let's
go ahead and fill this thing up with some oil and see if this thing will start we are using just
this cheap o'reilly's oil didn't really feel like spending a lot of money on a motor that could be
bad but we're only going to run it for about 10 seconds and if it's good we'll drain it out and
put some good oil in there oil in the car now it's time to go ahead and start it's the moment of
truth fingers crossed hopefully this bad boy starts up go oh it's making some kind of noise
let's go ahead and see oh we got to put the oil cap back on see what happens got the hazards still on
heck yeah now let's go ahead and shut it off because there's no coolant at all
so now that we know the motor runs we're going to go ahead and start taking it out i'm not too
sure on the transmission but it goes through every gear there's no jamming or lagging on that
so let's go ahead and get this motor right here it should be pretty simple because we got almost
everything off all we need to do is disconnect the manifolds and the drive shafts and it should
just slip right out all right guys that's gonna be a wrap for today's video we got a lot of work
done on this mustang we pulled the motor out and the transmission it was pretty tough because
everything was jammed up in there but if you enjoyed today's video go ahead and hit that
subscribe button drop a like and stay tuned for a lot more videos and make sure you follow me
on instagram at vtune
