Problems With Royal Enfield Himalayan Blinkers? Bad Flasher Blinker Relay | Moto Offroad Adventures

Hello everybody, we got a little quick fix it video today. Let's take a look what we're dealing with I'm having some blinker issues. They are intermittent and they're not flashing. So it should just be my relay I'm going to take a look. This is the 2022 model So you can see here when I hit my blinker on that's a solid light solid light If I hit my flashers They're staying solid as well Seems a little intermittent But is it definitely happening a lot So I'm gonna take a look at the the relay the flasher relay and I'm sure that's more than likely it I don't know if the relay is getting stuck open or not Or it's just failing it is under warranty. It's a 2022 But let's just see if the relay is is just getting stuck grabbing an issue here. So the only tool I'm really gonna need is just a four millimeter hex and I'm gonna take this plate off here as Usual three of the screws are real and one is just a placeholder for a pin there I'm gonna put that guy down All right, so I've got my relay right here It is on the battery side So you can see that it says oh, let's take a look Yeah flasher relay now this particular model here is a 2022. So I do have the flashers on it I think that is a 2021 and above if you have an older Himalayan your relay might be a little more simple Just handling the blinkers. I don't believe they have the flashers on there, but mine again It's gonna have the flashers and the blinkers relay is right here Let's just give it a little wiggle take a look at it inspect it and see what we got See the relay here with the connection It is on to has a rubber boot that is connected to a metal bracket there and it can slide right out You just push it a little bit from underneath and then pull up it's on a little rubber boot just connected I don't know if you can see that back there. There is a little metal connection there Single clip on top here does look secure I'm gonna take that loose You can see on it there if I can get that to focus Turn signal relay there, of course hazard signal there also with a part number I'll list below so it did look like it was securely connected a relay, of course is just a mechanical switch that is Electronically Changed excuse me. So we're gonna give it maybe just a little tap. It does seem to be periodic I'm wondering if it's getting stuck opened or closed So I'm gonna give it a tap on a hard surface see if that'll do anything for me and then I'll be right back All right, so just after hitting it a little bit on a on a solid surface got Eddie Vander there in the background You can see that it is working now. I'm not so confident. That'll stay working Well, let's take a look Back to blinking and flashers So after a simple little test, it does look like it is working I'm not sure how much I trust that so I'm definitely going to need to order a Replacements might get might take a little bit to get in. I'll reach out to the dealer But for now, at least I know that simple connecting makes the change And we'll see how long that lasts. I'll keep you updated got to put back in Just want to make sure there's just a easy metal bracket that the rubber goes down on to we just want to make sure you got really solid Connection there. We're all set. I'm gonna go ahead and get the cover back on everything set in place Let's go for a ride. Give it a test out and see what happens a little quick fix-it video If you have any questions link below, I'll put the part number go ahead and comment like and subscribe if you have a Himalayan or any other questions hit that Bell thing and We'll talk soon on the next adventure