Pool Lesson How to Shoot Every Ball Step by Step

TOP Billiards Skills
1 follower
Shooting balls is what pool obviously is all about, but it's not as simple as just going
down and pulling the trigger. Today I will show you my personal step-by-step process
that you can do on every shot no matter how easy or difficult it is.
Today I will show you my 10 steps that I do before every shot. The steps are divided into
three categories. Thinking, preparing and executing. And yes, 10 steps seem to be a lot,
but don't be afraid. Your personal skill level and the difficulty of the shot will change the
time you need to spend for every shot by quite a lot. So you could either spend a whole minute
for a very difficult shot to go through every step, but also just 5 seconds on a simpler shot.
Okay, I will do all the 10 steps one time very slowly and explain everything very detailed.
And then we're going to do it faster in my usual rhythm.
Check the angle. We're not checking the angle to already know where to aim,
but to know what is possible with the cue ball. With a straight in shot for example,
we can move the cue ball only on this line without cheating the pocket.
However, with an angle like this, we can basically get the cue ball everywhere on the table.
Check where the next two balls are on the table. Here we want to know where the 7 ball and also
the 8 ball is, because we want a nice angle to get from the 7 to the 8. If the cue ball would end
here, we would have an easy shot on the 7 ball, that's true. But the 9 ball is a blocker and we
would really have a hard time getting down table for the 8. Pick your point on the table. Considering
the position of the 7 and the 8 ball, we're picking this point on the table, so that we can
easily go towards the 8 ball. Look for the best path to get there. If we check the tangent line,
we will see that the cue ball will almost travel towards our point on the table. So we know that
it's possible to go to this path with the cue ball. And this leads to the next step. Figure out
where you have to hit the cue ball. We know the path we want to go. Now we need to figure out
where we have to hit the cue ball. By adding low on the cue ball, we can change the path like this.
And if we then just add a tip of left hand English, the angle will open on the first rail and
bring us towards our point. Okay, now we did all the thinking. That means we know where we want to
end with the cue ball, which path it should travel and where we need to hit the cue ball.
Now we start to prepare the shot. The first thing we do is step behind the aiming line or the so-called
baseline. This is already part of the aiming process. We aim while standing, not while down
at the shot. So we're stepping behind the aiming line and put our left foot, because I'm a lefty,
on the baseline. Now our arm, our head, the cue and foot are already on the right line.
Visualize and feel the shot. Our brain doesn't understand words but images. That's why we have
to visualize how the object ball drops and also the cue ball's path. This is a very important step,
because our muscle memory, brain and body will try to reproduce those pictures we just visualized.
Preparing and feeling the shot is something I do simultaneously while visualizing.
I do my pre-strokes in the air until I feel ready for the shot. It sounds very abstract but is very
important. One part of feeling the shot is for example to figure out at what speed we will hit
the cue ball. And this is not something theoretical like, I have to hit at speed 1.5 to exactly get
there. No, it's to already feel the speed in your arm and how the whole shot will look and feel.
Okay, after we prepared the shot, that means we're feeling ready, we're finally going to execute the
shot. First we step into the shot. Remember, my left foot, my left arm, my head and cue are still
on the baseline. And now we just step into the shot and never leave that line. And now we're
locking in. Before doing any pre-strokes we will stay down for a short time. This is one part of
checking that everything is aligned correctly so far. It helps to see if we're on the right point
on the cue ball, if our body position, stance, arm and so on is feeling right. If we're doing the
pre-strokes while going down, we can check this properly. Of course it works as well, but I really
improved by locking in first. Okay, we are still locked in and now we do the pre-strokes. We do those
to check if we're moving the cue straight and if the contact point, aiming and the whole setup is
still correct. It's like warming up. And if everything feels right, move your cue backwards,
pause and shoot. It's not necessary to do a pause, but what is important that we have a smooth and
controlled backswing. Because the backswing has nothing to do with the shooting motion. All the
energy comes from the forward stroke. If we're pulling our arm back really fast, the muscles
tend to tighten up and we will lose accuracy. As you see here, even my thumb moves uncontrolled,
the cue jumps up and wiggles if I do it really fast. If I'm doing a smooth backswing however,
everything is way more controlled. And now let's put the GoPro on and try to clear this wreck.
Okay, here I'm preparing the shot. I have visualized everything. I did everything that
we just talked about and I'm trying to get the cue ball into our desired position.
As you see, I'm staying down for a very long time. This is something I do because I want to show you
the cue ball as long as possible with the GoPro. But it's also important to not jump up on shots.
Here we got the perfect angle on the seven ball and we're trying to go two rails. As you see the
that I'm pointing on the table. So we visualized our path. I already know where I have to hit the
cue ball. Here I'm preparing. I'm going down. You see I'm locking in. If I'm feeling ready,
I'm doing my pre-strokes. Then I'm pushing the cue back. Yeah, it was a little fast,
but still okay. And we got a nice position on the eight ball. And here it's the same process again.
I know where I want to end for the nine ball. I know already what angle I have on the eight ball
and the path that I'm going is this path. One rail or maybe even two rails. Now I'm preparing.
I know where I have to hit the cue ball. Yeah, high with a touch of right in English. And then
I'm preparing. Stepping into the shot. I'm locking in. I'm doing the same on every shot. And as you
see, it is really fast. And my usual rhythm is even faster. Yeah, I'm just slowing down a little
bit here. But you can do, as I said, all those 10 steps in a very, very short time. Here we didn't
end up perfectly on a nine ball. We're a little close to the rail. So a little less right in
English would have been perfect. But yeah, still very doable. And we ran this rack.
Okay, those were my personal 10 steps that I do before every shot. And as mentioned,
I'm doing every step. But the time I need for each step depends a lot on the difficulty of
the shot and also your personal skill level, experience and your quick-wittedness. I, for
example, know really fast where I have to be on the next ball and how I get there. But beginners,
for example, will need more time. And that's just fine. With experience, you will get faster.
On my last video, where I was showing you how to run a rack of eight ball with my GoPro,
Andreas asked in the comments, why are you putting left spin on the eight ball?
First of all, there is no need to do this at all. It's just a habit I have
to add a tiny bit of outside English on those shots. I just feel more comfortable. And you will
also see a lot of pro players using a tiny bit of outside English on cut shots, even if it's
not necessary. It helps to compensate for a cut-induced throw. But as I said, it wasn't
necessary here. Okay guys, that's it for today. Let me know in the comments if you liked this
video. And if so, consider to leave me a thumbs up and subscribe to my channel. Thanks for watching
guys. Thanks to my sponsors and patrons. And as always, see you at the next lesson. Take care.
