Phần 2 - Bảo dưỡng nâng cao cho Vario_ Làm nhẹ gây ga, dây thắng, kiểm tra lọc xăng, vệ sinh nồi

Too reasonable to make a mattress, right? More than 20,000. There's quite a lot of dirt in here. This is straight oil, guys. But it's dirty like this. There. It's pretty dirty. Too much. If you rub it all over and soak it, it will jump out immediately. This is a proof. If you go for a long time, you will definitely wash your car, rainwater or dust will come in and make it dirty. Oh my God. I opened this on the street and I saw it for my brothers. I opened it and I said it was a bit dirty. But I went in, and it sent the water out. It was just like this. It's Monday, but it's still pretty good. Why don't you come and watch next time? Next time, I'll show you. Yeah, I'll show you. I loved it. Next time I will show you and you will come. I'll put it in this place. You can see the yogurt bottle over there, the yogurt bottle over there. This is what it looks like. First, oil, oil is put in to clean all the dirt inside the gas and straight wire of the guys I will pump the air, push the oil up, pump the air in, put the oil in, pump the air, push the oil up Here, the oil will come up here, you see, it's flowing out, this is already clear And do it many times like that, do it many times like that, so it's straight In the path of the gas line, straight line, gas line In my personal opinion, what is good, what is careful, what is the best customer service, we will do And if you have better, faster ways, or if you have done it before, it has higher skills Then just comment below and share so that Nhat can learn more But we only do the best for our customers There are many people who say that the work of making these gas and oil lines is done in 2 minutes, 3 minutes But I also shoot a long time, if there are problems that need to be done To share with customers, uncles, they understand more It's not too long, guys, gas and oil lines are also quite fast But as carefully as possible, as carefully as possible, without making a mess It has to come out of the water like that, guys, there is a dent, there is a dent, right? Gently The gas line is also light, guys, it's all in Here, it's all in, as you can see And now I will restore these lines, clean them up Pretty clean, a lot The feeling that you guys make light is the gas pipe, it's good enough, don't say it's a gas line There, continue to clean The best thing for the customer is to repeat all these steps and then put it back in, it will lighten the gas pipe These are simple, if you can't make a gas line, you can make a gas pipe at home You just need to remove it like this, clean it up, put it back in the gas pipe, it's very light Sharpen it I will put the rubber band in, attach the gas pipe When I just do normal maintenance, I have already rubbed it into the gaps, gaps, gaps, gas pipes, gaps So when I go for a long time, I wash the car, the rain water comes in, it also cleans up, I rub it like that, it will lighten And when maintenance increases, you will be supported, you will be, not supported, you will be, remove it all Remove it all, clean it up, put it back in, the car will be much lighter Clean up the gas pipe Gently, gently Alright, just put it together Alright, the gas line is also done, let me test it for you Gently with 2 fingers Gently with 2 fingers, there is no way Gently It's great when you can hold the gas pipe like this, you don't have to bend it to get it out of your hand Last month, I also finished it, I tried it again, I pressed it and it stuck I feel like the gas pipe is very soft, let me press it It's very soft, very soft, it feels very soft It's not that hard, hard, hard, you guys just press it hard, hard, hard, hard, just turn it over and let me breathe, I'll check and handle it Starting to make the back gas pipe of this Vario This is also the process of cleaning and washing the inside of the winch, then putting the nut in, so that the winch is lighter. The winch has a standard to replace the new one, for example, about 20,000 VND. I should replace it to avoid it from being too loose, too loose, or too loose inside. It makes the winch unstable. If the winch is too loose, I have to press it very hard, sometimes it runs out of power. But in the back, I have increased too much. Sometimes the weight of the winch is too heavy, I have to press it very hard. If my winch is too loose, I should replace it with a new one, so that my winch is safer. It's done, I've cleaned it up and put the nut in. As you can see, the nut is very light. In addition, the winch is in the correct position for the customer. When it comes to safety, you should be careful. For safety, you should always have the right tools with you. The right tools, the right tools to help support your car. When you need to replace the right tools, it's always safer than when you use the wrong tools. I'll try to move closer to see how the winch moves. If you want the winch to move straight, you should stop like this. Let me turn the winch to see if it's light or not. Sometimes my hand is in the correct position, but the winch is too heavy, so I have to release it. So that my winch is always smooth. Let me try to move it straight. The winch is good, right? If you need to move it fast, press it hard. This is a light winch. Smooth winch. That's right. You shouldn't let your winch move according to your hand. If your hand is too heavy, the winch will be out of gas. And it will damage your car a lot. Vario gas filter. Almost all FI cars now have a gas filter system like this. This is a big gas tank. Gas will be sucked up from here. My big gas tank is here. Gas will be sucked up and pumped out here. This is a gas filter system. But now, this gas filter costs 15,000 to 20,000 VND. The manufacturer, Honda, has advised us to replace it. Because there are filters and filters in here. At that time, our gas will be dirty. But we will definitely have a filter to make the filter dirty. This filter is dirty. It can't be blown out. It can't be cleaned. There is no way to clean this filter. There is only a way to replace it. 15,000 to 20,000 VND. You can replace it. I guarantee you that your driving will be better. Your car will definitely be better. Let's continue to assemble the pump and the gas filter. This part also needs to be asked for specific details. If you put it in and it leaks, As I said in the previous clips, If it leaks, it's okay when you run out of gas. But if you fill it with gas and it leaks, it's very dangerous. After assembling and finishing, Now close the box. We start to clean the tank. His tank is still beautiful. It's still beautiful. You see. The rubber is still intact. The wire is still beautiful. So I decided to keep it completely free. There is no replacement. Just cleaning, washing. I do a lot of cleaning and washing. All of these cleaning steps help the tank to be cleaner. There are many clips that I have uploaded for you to see. It will be cleaner. The tank will be more durable. And there will be a lot of feelings that will be removed. For example, the head shake. The motorbike is weak. Done. It means that the Vario 150 has been completed. This Vario 28, 29, and 220. High maintenance. There are 14 steps. I just lifted it. It has helped his motorbike to have feelings. From the straight pipe. And the exhaust pipe. It's all clean. It has completely restored the feeling of driving smoothly. And the feeling of driving more comfortably. In these straight pipes. You see. And one thing is for sure. If the motorbike is maintained regularly. At normal maintenance levels. It means 10 steps. It's smooth and quiet. It's good. And in this Vario 15, 20,000. High maintenance like this. It will restore the motorbike. It will restore the feeling of driving. I just lifted it. It's great. The motorbike is straight. And it's smooth. The remaining steps. For example, the pump. Checking the front and rear wheels. Checking the D-pad. Or washing the tire. I have made many clips about that. You can watch the previous clips. Now, I have finished pumping the pump. And cleaning the mirror. The clips about motorbike maintenance. I have a lot of them. A lot of clips. If you need to know more about motorbike maintenance. And what you can do to restore it. How the motorbike is maintained. Just watch that clip. Or comment below. Make a clip about motorbike maintenance. I will make a clip for you. Thank you for watching. Goodbye and see you again.