Origami Papiroflecta • Paper Folder • Origamist
Nov 12, 2023
Do you love origami? Here is a model to pay homage to all the people who love folding paper!
Visit Origami Spirit: https://www.origamispirit.com/2023/11/origami-video-tutorial-papiroflecta/
In this video we will fold a figure that pays homage to the art of origami
and to those of us who love origami.
Its original name in Spanish is papiroflecta, which means paper folder.
It is a design of Oscar Rojas from Costa Rica.
I hope you enjoy it.
We can begin with any rectangle that is about letter size.
It can be US or A4.
About this proportion is OK.
But we are going to cut it so that we have a 2 by 1 rectangle.
To do that we are going to fold in half, short edge to short edge and fold.
And now we are going to bring this lower edge to the crease
and make a very short pinch mark right here.
Same on this side.
And now we are going to make a fold that connects from this point to this point.
Those two pinch marks.
We can pick it up and make it a little longer.
And then same here.
Make sure that these edges match.
Then we have a rectangle 1 by 2.
We are going to cut off this section.
We discard this one.
We are going to fold in half lengthwise.
Edge to edge.
Unfold.
And we bring both sides to the center.
We are going to rotate and bring this lower side to the central crease.
Then we make a fold along here, bringing this edge to match the lower folded edge.
We have this.
At this point I will continue to demonstrate with a larger piece of paper.
This way, a little larger, we can visualize better.
We have this section.
This will be the section of the bird.
And this, which doesn't have a crease here, is the section of the body and the head.
We will go ahead and work on the section of the bird.
We insert our finger right here.
And we are going to press from the left folded edge so that we squash.
And we repeat here.
We have two flaps here.
We reinforce this horizontal fold.
Lift the left flap.
We are going to insert our finger and press and squash.
So that the central crease aligns with what is underneath.
Fold along this crease up.
And now we are going to create a fold that comes from this corner to this folded edge.
We bring this edge to align with this.
Unfold and bring the flap down.
We bring this flap down.
And repeat here.
Bring this edge to align with this.
Unfold and bring it up.
We are going to make a line that connects this point with this point.
We lift this and start creating that crease.
Bring this point to meet this one.
As we do that, we are going to press here.
Making sure that this forms a petal fold.
And the raw edges lie one next to the other.
Here we create a new fold.
And this here ends in a point.
We are going to repeat here.
We have to bring the flap up.
Fold from here to the folded edge.
Align this edge with the horizontal.
Unfold and bring the flap down.
Bring this flap down.
Align this edge with this.
Unfold.
On this side we have mountain folds.
We connect these points with a vertical fold.
Make sure that this point meets this one underneath.
And we create two more folds here and here.
So we should have this and this flap.
We are going to bring our thumbs underneath the larger flap.
And swing all that area to the back.
Now we will create a fold from this central point to the corner.
And from that central point to the other corner.
First one and then the other.
This edge should align with the bottom one.
We have many layers underneath so we work carefully.
The two new creases are parallel to these edges.
We are going to place our fingers behind and press forward.
So that this triangular area meets this one.
Same here.
Both at the same time.
We make sure that this little flap is up.
We move it to one side and bring this petal fold up.
And this over to the left.
Then we bring this to the left.
And this petal fold up.
And this left side to the right.
So we clear this central flap.
Make sure that you sharpen this edge here.
And then we notice that there is a pocket there.
We are going to bring our finger in.
And carefully, because we have several layers of paper,
we are going to squash.
And that creates a preliminary base.
Then we are going to bring this double edge there
to align with the center.
And make a fold from this corner up to this edge.
Repeat here.
This is pre-folding.
Unfold.
We are going to open this flap.
And create a fold from this edge to this edge, horizontal.
So that we make another petal fold.
Bring this up.
Press from one side.
Reverse a fold that we have already there
into a petal fold.
Same here.
Press.
On this area we have to reverse a fold that is already there.
So we created actually a wing.
Pick it up.
We are going to work in the air.
Bring the wing down.
And then one of these will be a head.
And the other will be the tail.
Hold it.
And then pull it down.
So that you see the curving paper here.
And we bring it to an angle that we like.
And then press it flat.
You can actually bring this down.
And we are going to repeat here.
Actually I like to bring it a little farther.
And press once we like the angle.
Then we inside reverse the head
The same way we do with a crane or a flapping bird.
We bring this flap down.
And we are going to open this area.
And open the flaps actually.
It looks a little bit like a box.
And we are going to keep opening it.
And bring this back up.
So that we create a fold here.
And here.
The left side of the bird we are going to lift it.
Lift it and bring it to the right for the moment.
And we are going to create a fold coming from this corner out to this folded edge.
Actually we are going to fold the paper as far as it goes.
Which is this inner point.
It might not match this, but this point.
A horizontal fold all the way.
And here is a little hard because this is going to become three dimensional.
So just briefly let the paper come up like this.
And mark that crease.
It's like a hem.
Once we have that crease we are going to flatten again.
By creating a crease coming from this point.
So the important thing is that it starts here where my index is showing.
And it's going to come out to this corner.
And we flatten the paper by making another fold here.
Now we are going to bring all the bird to the left.
And we are going to repeat on this side.
Look at that point. That's as far as it goes.
Where this crease is, begins the new fold.
And we just flatten and press.
So that we have this crease and this.
At this point we are going to pick up the paper.
And we are going to bring this hem to the back.
So we are going to reverse the folds.
Lift, press to the back, press here.
It should reverse nicely.
We bring this to the right.
All the area of the bird.
And we repeat here.
This valley fold will become a mountain fold.
So we press here.
Press that into a mountain fold.
And reverse.
This is the area of the bird.
And now we have a whole other area of the paper.
That will become the head and the body.
So we are going to turn it over.
Bottom to top.
And we are going to bring this edge to the center.
And create a fold here.
And repeat here.
We are going to rotate so that we can see the full piece of paper.
We are going to turn it over.
And now we are going to bring this edge to the center.
Allowing the flap underneath to pop out.
We align here.
And make the crease all the way to this corner.
And the folds will overlap.
Rotate and repeat.
We are going to create a mountain fold on this side and this side.
Narrowing the head.
To do that we are going to bring this upper flap down.
On this side is a valley fold.
It is going to be about here.
To do that we have to visualize that it is going to be parallel to this horizontal.
And this corner will touch this edge.
So we bring that corner to touch the edge.
And make sure that whatever we do here is parallel to this.
As much as we can.
Unfold and come back to this position.
Bring this flap up to match this point.
At this point we have that fold underneath.
So that we guide ourselves to bring this down.
And match the mountain fold that we have underneath.
And it touches this edge.
Now we bring this flap up again.
Bring this flap down.
And we are going to create a fold coming from this corner on the right.
To this edge on the left matching this horizontal.
From here to here.
And we are going to bring this edge to align with this folded edge.
We are going to repeat on the other side.
So bring this down.
This flap up.
And we are going to create a fold from this corner to where the crease is underneath.
Right at that point.
And then bisect this angle.
And the edges align.
Then we are going to create one fold for the ear.
If we look at this distance of the raw edge.
About at the center of that distance.
And we are going to bring out so that it sticks beyond this edge.
About there.
We open this.
And we repeat here.
Actually we can match this flap to the one on the other side.
So we have the ears.
Rotate.
We visualize this distance from the bottom of the ear to this corner.
There is an existing crease visible here.
That crease signals the point where we are going to be creating a new fold.
It is going to go across.
So we have two points of reference.
That and on the left the same crease ending here.
So we just connect those two points and continue on all the way to the edges.
That is a mountain fold.
We are going to be making a fold along here.
Parallel to the edge.
By bringing that edge, letting the back pop up.
And aligning it with the corner that we have underneath.
Now we are going to be defining the jaw here.
If we visualize this distance and divide it in thirds.
One, two, three.
The middle third we can define as the jaw.
This is going to be a compound fold.
That means that we are going to be doing several folds at once.
To break it down, we visualize that point of the jaw here.
If we flip this down about there.
We are going to be making a valley fold from there to this corner.
To do that we just leave it up like this.
Hold it from there and press.
Press and make that fold.
Then we are going to continue pressing.
So that we make a mountain fold just about parallel to the edge of the ear.
We continue pressing all the way, even this layer.
Because we want to hide it.
And we create a mountain fold.
We actually created three folds.
We are going to repeat this on this side.
First this one and then we continue pressing.
So that the mountain fold is just parallel to the edge of the ear.
Three folds.
This first one and when we press there will be a valley fold inside.
And then a mountain fold.
We rotate it and turn it over.
We are going to be narrowing this area.
We are going to be making another compound fold.
It will be coming from here, this inner corner.
All the way to this first corner here.
As we do that we are going to flatten this area.
So that it gets squashed.
Creating a fold from here to here and from there to this corner.
First we make this.
As we do that we place our index finger here and we can flatten.
Rotate and repeat.
We just have to be careful because we are working with several layers of paper.
Then we turn it over, rotate and we see how we have narrowed this area.
To shape the head and the hair we are going to align this edge to this.
And press so that we have a new fold.
Then we create a mountain fold here by bringing this little flap over.
And we let this come up.
And we can just create a little curve, a little flare of the hair there.
We are going to fold along this vertical, extending it over here.
Repeat.
Rotate.
We are going to create some folds coming from this corner down.
Some of them are going to be soft and some sections are going to be sharper.
So what we want to do first is bring the flap over beyond this edge.
And this is to taste.
Then what I like to do is press sharply here and leave it somewhat soft.
So I don't press hard.
Then I bring this edge back to match this.
Pressing again this section and letting this section be soft.
That is suggesting a sleeve, a row with a sleeve.
Then we are going to rotate and repeat.
We make it as symmetrical as we can.
We work with several layers of thick paper so it might be a little difficult.
Press here on the right.
Sharpen those folds.
Rotate.
Fold along this central crease, including those sleeves.
And we can leave it like this.
It stands like this.
I have also tried to lock it somewhat by folding this corner slightly.
It's two corners.
So it stays up easily.
And here we can lift this area of the bird.
Bring the wing down a little bit.
And the paper folder is offering a bird to the world.

