Only 1 Cut! Make a Perfect Paper Star in Seconds ⭐️

In today's video we're going to make a paper star just like this one here. This model is very simple and has a beautiful result. We can start with a square piece of paper, but if you don't have a square, I'll show you how to get one from a whole sheet of paper. With the paper in this position, we'll bring the top edge to the left side. Just align it like this, and make a small mark here at this point. Now, with the paper in this position, we'll fold a vertical line, aligning it with the mark we just made. Simply fold the paper to the side, aligning the top and bottom, and then crease the fold. Unfold it. Now we need to cut the paper along this line, or if you prefer, you can carefully tear it. We have a square. For the next step, we'll fold the square in half, make sure the open side is facing to the left. Now bring the top edge to the left side. Crease only the center to create a small mark in the middle. Repeat the same process for the right side. This will form an X in the center of the paper. Bring the bottom right corner to the center of this X, and crease the fold well. Next, on the same section, fold the top edge down. Now fold the right edge to the fold we just made. Flip the paper over, and fold one edge to the other. When you finish this step, hold the paper in this position. Now we have a triangle in the first layer. We'll need to cut within this triangle. The size and angle of the cut can vary depending on the result you want, but to keep it simple, in this video, we'll cut a straight line. After cutting, unfold the paper to make it look nicer. Reinforce each of the points. At the end, just open it up and adjust a bit to finish the shape. And our paper star is ready! It's a very simple design, but with a beautiful result. Thank you so much for watching, and see you next time!