NO PATTERN How To Make a Reversible Jacket From an Old Quilt or Blanket

Traditional Crafts
485 followers
I've been hanging on to this old quilt for quite a while. I was never quite sure what I wanted to do
with it, but I think I got it figured out. I wanted to make an easy reversible jacket,
and I'm not going to use a pattern, and we're going to do it together. The first thing I did
was cut this into a rectangle that is 51 by 60 inches, and then I went to my sewing machine
and around the entire perimeter I just did a quick kind of basting stitch so that these two
sides don't come apart and I can work with it easier. I'm not loving this dark blue piece here,
and I'm really not loving this area either. So I'm taking a piece of sort of blue mattress ticking.
I'm going to lay this here, pin it, and sew it, and then I have a piece of this quill. I'm going
to pin and sew that, and I'll just go around the edges with a zigzag stitch. I laid this out the
long way, the 60 inches, and then I folded it in half. Kind of a wonky quilt, but I lined things up
and smoothed it out the best I could. Now this is the open side, and this is the folded side.
I'm going to work right on the folded side right now. I want to find the center. This is 51 inches
long, and so half of that would be 25.5 right here. I'll stick a pin from this pin this way.
I'm going to mark three inches and the same this way, three inches. From this mark to this mark,
I'm going to cut a little arc. You can draw it if you want. I think I'm just going to cut it out.
It's less than a half circle. I would say more like a half oval. Here's the bottom,
the open side, and there's the little arc that we cut out. I made a pattern that is 11 by 11 inches,
and I'm going to trace this. I'm creating the arms, the shape of the jacket. So I will put this
in the corner here, trace it, and then the corner, opposite corner as well, and trace it.
My lines are right here that I traced. So now I'm going to take pins and just pin along that line
so this doesn't shift around when I sew it. So now on both sides with a straight stitch,
I'm going to sew right on top of that line that I traced. Now I can cut these corners out, and I'm
staying about quarter of an inch from that stitch we just made. I want to cut the front open to make
it more of a jacket, and so I need to find the center all the way down. I know from here to here
it's still 51 inches, so 25.5 I measured over and made a mark. Down here it's about 19 and a half
inches across now. Figured out what the center of that was, or the halfway mark, and then I kind of
straightened up my line, took that top measurement and the bottom, made a straight line. And now
I can cut that open, and I'm only cutting this top layer. How cute and simple, right?
You can keep it as simple as you want. There's the back, and I'm going to show you the other side in
a second, but I want to show you this, because you can use blankets. And I always find cool
looking blankets at the thrift store. This is a tutorial. I'll put the link down in my description.
This was just a little longer and a little bit of a different shape, but it's the exact same concept.
Cutting those corners out, cutting the rounded neck, cutting it open in front, and then just
decorating it how you want. All right, I'm going to flip it around so you can see the other side.
And here's this side. Totally different looks. Now since I cut this open, I need to go
just do a quick little stitch just to keep that all nice and tidy. Now it's time to give it
a little bit of decoration. This adorable kitty in a boot fabric applique is from an Etsy site
called Keepsake Fabrics. I'm going to put her link down in my description, and she has tons of
gorgeous images. Now this little flower cluster and this one from a curtain, and then from a
separate curtain, another little rose. And now I will just pin all these on securely, and I will
zigzag stitch everything on. This is what the stitching looks like on the opposite side.
This looks like another little detail. What I want to do now is add two roomy pockets to the
front. For the pockets, I made a pattern that's eight and a half inches tall, seven and a half
inches across, and then this is from a blanket. It's kind of a knit fabric. Cut out two pieces
of that and two pieces of cotton fabric for the lining. Now I'm going to put these together,
right sides together, line them up, and I will pin all the way around except for about a three
inch space right there that I won't sew so that I can turn it inside out. Now I'm going to sew
these together. I'll use half an inch seam allowance. I'll start at one side of this
opening, go all the way around, and stop here on both pieces. I'm going to snip these corners
so that they're nice and pointy when I turn it right side out.
Okay, now I'm going to go press these. I messed up a little bit. I meant to have both openings
at the bottom of the pockets. I'll press this opening so that it's all nice and flush.
This one I did it at the top so I was going to just sew that when I sewed it onto my jacket
but this won't work since it's the top. I'm going to have to do a top stitch
to close that up and since I'm doing it there I'm going to have to do it there.
I tried the jacket on, decided where my pockets would feel the most comfortable, and I pinned
them on. Now it's time to sew them on and I'll sew all three sides. I'll do about an eighth of
an inch seam allowance. I'm trying to stay close to the edges. Pocket's done. Then I added a sweet
little flower right there. Now I want to decorate the reverse side and yesterday I made these
mushrooms from Scrappy Fabrics and Mother of Pearl Buttons and I filmed it so I'll show you how I made
them. First thing I'm doing is sketching out three different mushrooms on some packing paper.
Wrapping paper works great for larger patterns as well and I'm separating the caps from the stems.
This one's about nine inches tall, about 14, eight, about eight. Now I'm going to cut out these six
pieces. Not that it matters a whole lot but I'm going to number these like this one goes with
this. This is one and one, this will be two and two, three and three. Now I'm taking another piece of
paper and I'm going to lay these on here and I'm going to retrace these pieces. Now I'm going to
draw a line in each one of these pieces. So here I'll go like this and like this and now what I
want to do is cut out this piece and cut out this piece on all of them. So the big chunky cap and
then the right side of the stem. Each mushroom will have four pattern pieces. I'm going to take
the three largest mushroom caps and set the rest aside for now. I have a piece of fabric that looks
like this, kind of a cotton calico. I want five mushrooms. I want two on the front and three on
the back. On the back I want one of each size and on the front I just want the two smallest ones. So
I'm going to trace one of these and two each of these on this fabric and cut them up. I have a
piece of fabric that looks like this and I'm going to cut out five stems to go with the five mushroom
caps. Now I have a piece of fabric that looks like this and I'm going to the top part of that mushroom
and doing five as well. One, two and two. Now I have kind of a rustic little fabric like this.
I'll trace and cut out those smaller stem pieces that we drew. Now we can assemble the mushrooms
and the first thing I'm going to do is add this little shadow fabric to the right side of each
stem and I'll stick a couple pins in since they're kind of little and I don't want them to
maneuver around on me. Now I'm going to sew these on. I'll use a goldish mustard colored thread
and just stay close to the edge using a small zigzag stitch. Now I'm pinning the stems
onto the large mushroom caps and the only thing I want to make sure of here is that
the red will go on like that. I want to make sure it covers the tip of the stem
like that. So they all do and now I'm going to go sew these on just right here with a small
zigzag stitch. Now I want to pin and sew the red part on and I'm sticking with my gold colored
thread. Now what I want to do is take, I think I'll use dark brown thread and I just want to put
some weavy lines in here just to kind of break up this um kind of it reads salad it's actually a
subtle little pattern but I still want to break it up a little bit. I decided to go with black.
Now the last thing I want to do to the mushrooms is I went to my stash of buttons and I found a
bunch of vintage mother of pearl buttons and I'm going to sew them all on to be the little spots
on the mushrooms and I'll use an off-white thread. So on the back of the jacket I pinned three on,
one of each size and then on the front, let me move this up a little bit, I put two
up here. I didn't want to get in the way of those pockets so over those or anything.
All right I'll go sew those on.
Okay it's the next day. I've added a long narrow patch right here,
another little flower right here, and then a cluster of flowers that went over the shoulder
and kind of connected to that big rose I had on the back. And now all these raw edges I want to
bind with bias tape for the first time ever in my life. So fingers crossed. This jacket is a tutorial
but it was a duster in the tutorial and I've since cropped it and these jeans are a tutorial
as well. I'll put those links down in my description. So let's do the binding. I pick up
binding at the thrift stores in case I ever decided to learn how to do this. And what I'm
going to use is, it's a double fold and it's a half an inch and three yards. I'm probably going
to have to use pink and green since I don't have enough of any one color. I'm going to use pink
around the neck, down the front, around the bottom, and up this side. And these are only three yards
so one won't be long enough. So I'm going to sew two of these together. I'm sure a lot of you are
familiar with bias tape and this is what it looks like when you open it up. So there's a fold there
and then two folds here. So it opens up a lot wider than the half an inch. I am going to press
the ends of two in order to sew them together. Now I need to cut this at a diagonal so the easiest
thing I figure is to fold it like this and make a crease so I can have a cut line that I don't have
to do any measuring or anything. Now I'm looking at the right side here and right side here.
I'm going to put this over top, lay this over top and draw a line and then I'm going to cut this.
Now I'm going to lay these together, right sides together, making sort of an L with my ribbons
and I can't lay it perfectly on like that or it won't come out straight. I have to pull this point
out a little bit and leave a little bit there. And now I'm going to stick a pin or two in there
and now I'm going to sew these together. I'll start there and here and I will use
probably a little bit less than a quarter inch seam allowance. I'm cutting those corners off
and now I'm just going to go press that. Now I want to prep this for sewing. Can you see
the difference? There is a slight difference. This fold is smaller than this fold. I am going to start
sewing with the smaller side because we're going to wrap it around the edge and we're going to
need the larger side to do that otherwise we'll get short. So this shorter side I'm going to
leave the longer one folded but this shorter side I'm going to open up and slightly press that
so I'm not fighting all those folds when I'm trying to sew and see what I'm doing.
I watched many YouTube videos to try to figure out how to do this and there are a lot of different
ways so you do what works for you. I'm kind of combining, I pick and choose from the videos
things that make sense to me and that I like. I'm going to start with this end and I'm going
to be sewing along here. I want to fold this at a 45 degree angle just lining it up there
and I'm going to press that. I'm going to start sewing my binding about right here. I am not going
to start at a corner. I'm going to lay my binding tape lined up with the edge of the jacket right
sides together and I'm not going to start sewing at the top. I'm going to come down about three
inches and start sewing. I'm going to use a straight stitch and a quarter inch seam allowance.
Now we're coming to a corner and what I'm going to explain to you should ensure that it's nice
and mitered at the corner when we flip it over. So what I'm going to do is come all the way down
to the bottom about a quarter inch from the bottom and then I'm going to take my stitch
at an angle off the corner and I don't even need the back stitch here. Now this may seem
complicated. I used to think it was but it's not. It just sort of naturally happens. There's not a
lot of different ways that this ribbon will go. So I'm going to angle this at 45 degree angles
and just kind of line it up with that little angled stitch we made. So now I have this at an
angle and then I'm going to bring it back and I'm going to line this fold up with the edge of my
jacket and then I'm going to start at the very top and continue sewing the rest of the way.
I'm able to work it around the curve of the neckline pretty good. There's a few little
crinkles but I really don't want to go learn how to do curves so I don't mind a few little crinkles.
Now we're coming to where we started. Remember we didn't start sewing here we started sewing down
here. I am going to take this piece lay it over top and see where that stitching where we started.
I'm going to go a little bit below there and snip this one off and now I'm going to sew all the way
down until I get to the end of this making sure it's at least overlapping that part a little bit
and then when we flip it over it'll have a nice clean edge right there. Now done sewing that first
part now I'm going to open up this bias tape and I'm going to press in this crease right here or
seam. Now that I have everything pressed I'm going to flip my jacket over to the opposite side.
Now I'm wrapping this around to the other side. Now my binding wants to go a bit bigger than it
is on the opposite side so what I'm doing is just overlapping the side of the jacket
about the quarter of an inch otherwise my stitching will show. I want it to kind of line up
with that with the opposite sides. On the corner the underside is nice and mitered and I'm finding
it looks best if I straighten this one out and then just fold this one over on top like that.
I decided I'm not going to pin this any more of this. I think I can overlap that just as neatly
at the machine as I sew. Now I'm going to go sew it. I'm going to stay fairly close to the edge.
Not bad considering my first time and I had a wonky old quilt to work with.
Everything's all cleaned up. Now I want to do the ends of the sleeves and I think I'm going to use
green and I'm going to do it start and stop the exact same way and this will be easier because
I won't have to miter any corners. Sleeves done. I want to add a one button closure
on each side of the jacket and I want to do a button and loop. This is the old button I chose
for this side and I'm going to use an old boot lace. You can use whatever sort of cording you
think will work whatever you have around. There's no right or wrong for this. I measured down six
and a half inches from the corner here and then I went outside of that bias tape oh maybe a quarter
of an inch and I made a dot. That's where I'm going to sew my loop and so I'm coming across
here about an inch make a mark and that's where I'm going to sew my button. If I measured from
the top of the collar here it will be different because this angles so I'm measuring from the
bias tape. I'm going to take my button. I want my loop half the size of my button and so I'm
just going to play with it and just measure out about half that button. Okay now if I stitch it
here is that button going to go through very nicely so I'm going to mark where I want to sew
and now I'm going to take it to my machine. I can clip a little bit of this off just to make life
easier and I'm going to lay that on that mark and I'm going to do a few rows of straight stitching.
I suppose you could do a zigzag too as well right there. Now I'm going to clean this up a little bit.
I don't really care if the stitching shows on the opposite side. This thing has all kinds
of stitching all over it and then I'm going to trim these off and now I have a little scrap
from this side of the quilt. I'm going to my machine. I'm going to lay that right there
to hide those ends and I will just do two rows of zigzag stitches to hold that on. Now I'm going to
check make sure my button goes through. It sure does and now I'm going to sew it right there.
Okay reverse side is done. I came down on this side eight inches. Now I want to show you something.
How stinking cute is that when you open it up and you see that kitten. I just love that little
applique. Now I'm going to go put it on and show you what it looks like. Okay here's the crazy
quilt side. So fun. You know you can, you may know this, but you can make your own bias tape.
You could use a pattern or if you want to match a fabric exactly. Lots of tutorials on
on YouTube. You basically just cut fabric at an angle on the bias. All right these jeans are not
a tutorial but I do lots of paint splatter jeans and I have a great video for that and I'll link
that down in my description. I'll bring this in closer so you can see more of the details
and then I'm going to reverse it and show you it from a distance and up close as well.
Okay here's the other side. Do you have a favorite side? Because I think this might be my favorite. I
just love these old vintage fabrics and the patchwork shape. This cheveau is a tutorial.
I'll put that link down in my description. These pants are not a tutorial but I have a very similar
one using the exact same technique sewing fabric appliqués onto jeans. All righty I'm going to
bring it in closer so you can see more of the details and I thank you so much for watching.
