Hey guys, Paul here. Welcome back to the channel. So I have tested two displays so
far for the new Model Y Juniper and today I have another new display.
This is T8 display, 8-inch instrument cluster display
that fits on top of your steering wheel column
and this display is actually the most affordable so far for your new Model Y
Juniper and it has all the functions that you need like
autopilot warning, blind spot warning, both
active and inactive. Also all the information
from the car right in front of you with Apple CarPlay and Android Auto. So in
today's video I'll show you what comes in the box and
then step-by-step installation. It should take
about half an hour to 20 minutes to install
and then we'll test it out and see how it works and how
it looks in the new Model Y Juniper. Now let's go.
Let's see what comes in the box of this new T8
8-inch instrument cluster display for the new Model Y Juniper
and here what came in the box and this is probably one of the most
simple and less complex. Also one of the best graphics with Apple CarPlay,
Android Auto and all the information that you need
on the display that I have tested last year. Now they have a new one available
for the new Model Y Juniper. Let's check out the display itself first. So the
display is an 8-inch display diagonal this
direction and it's really really low profile. This is
probably the lowest profile display so we'll see after we install if
this block any AC at all. We'll test that too
and you would have to pre-install this onto the steering wheel column
replacement which is this one. So you basically just insert
the wires to these two ports right here and then screw in
these two screws which came with all the screws that you need
and a small screwdriver. Also the wiring harness
for the display. This will be connecting to
the passenger side mobility port and the power
wiring. Also a plastic trim removal tool and
fishing wire so this will help fish through the wiring from
the right side to the left side which is the driver side
on the steering wheel. Also the display manual how to use the display. Alright
now we saw everything that came in the box
let me show you where to get the display. You can get this new T8
instrument cluster display for the new Model Y Juniper
from Teslasi or Teslasi.com. As you can see here
I have installed similar display in the older Model Y because they have the
options for model older Model Y, Model Y Juniper, Model 3
and Model 3 Highland and the pro version is for only the older
car because the installation is different. So
the new Model Y Juniper only have T8, regular T8
available and you don't need as I mentioned you don't need the front
forward camera because the car already has
the front forward camera built in with the car and if you are interested you
can use my special discount code DATTC for extra
discount. Right now they have a special promotion
with the discount code this display it's only
$200 and it came with all the functions that you need. Now let's go and install
it in the new Model Y Juniper. Before we
continue with the video let me show you something that I have been using for
more than three years in both of my older Model 3 and Model Y
and I recently just installed it in this new Model Y Juniper. This is
MagBag wireless charger MagSafe compatible
for Model 3, Model Y and also the new Model Y Juniper
and the new Model 3 Highland. This MagBag wireless charger is
really easy to install you basically just
clean off the corner back of your display
and then use the adhesive to install the charger
on the display. After that just run the cable along the center console
and then just plug it in. You can basically install this wireless charger
within five minutes. I also love the overall
design of the charger it blends in really really well with the interior of
my Model Y Juniper and it is really easy to
use you basically just place the phone on the charging pad and then it will
charge. I love the charger position because it's
in the line of sight so if I want to unlock my phone I can just use my
Face ID to unlock the phone and MagBag not only
offer a phone charger for Tesla they also have
really really cool phone cases like this one
has really awesome function finger strap in the back
and a kickstand and has really strong magnet so you can use it
anywhere and they also have this multi charger
that you can use at home to charge all three devices
at the same time. I'll make sure to put the link of this MagBag wireless charger
in the description down below and special discount code for you too. Thank
you so much MagBag for sponsoring this video now let's
continue with the video. Let's start with the installation first
thing first you have to remove the panels first so we'll be removing
first the rubber gasket or the rubber seal on the door seal
these are really easy to remove there's no glue underneath it as you can see
next let's remove the panel on the top or next to
dashboard just slowly remove it now this panel is removed as you can see
they're all clips no screw at all really similar to
the one on the Model 3 Hilux. Now remove this locking clip
for the door seal panel use one of the plastic trim removal tool it came with
one but I usually have the whole set with me
I got from amazon.com I'll put the link on the bottom of the video
and that's it so this one came loose keep the clip and then now you can pull
it out and carefully remove this piece
so again no screw just for a bunch of clips
underneath just do it slowly and carefully
that you should be able to remove this whole panel
now that all the panels are removed we have the full access to
the power connector which is this one on the outside white
color and also OBD port just this one right here this is open port you can
just plug it in and before we disconnect the power I
highly recommend to turn off the power of the car first so
just go to the control which is the main menu right here
and then safety scroll all the way down power off and the next step here
to connect the OBD plug and power to the car
first connect the OBD first as I mentioned before this is open
so we just have to just plug it right in there you go
and next is power so power you would have to unplug
it first from the car and then plug in the power pass through from
the device now we plug in the power from the car back to the
pass through and since this connector has another
female port for the OBD you can actually connect
more than one device to the same OBD port so let's say I connected
the front display and I also want to connect
the knob or shortcut buttons I can just connect
through here I don't have to disconnect the original one
right here same as the power port here all right next step here after you plug
everything in open this panel right here there's no
screw at all just magnet tab as you can see
here here and here and then open up this side panel
on the center console no screw again whole bunch of tabs just gently open it
and then fish through the cable from this one right here like a big space
open from this side to the driver's side let me show you
here's the driver's side again open up the panel
just gently open it and then that same space
it's coming through from the other side so just fish that cable through
now one more panel we have to open because we have to get the cable from
up from down here up to the steering wheel
column it's this one right here so there are
four screws so two on each side
two right here and two right there let me show you here are the two screws
on the driver's side these two right here you would need to unscrew
after those four screws are removed you should be able to
pull this panel down don't pull all the way down
just leave it hang open like this because this is any airbag
you don't want to unplug anything or pull everything all the way down
we just need this access from here up to the steering wheel column and the next
step here to remove the steering wheel column cover before
you do that and make sure you move the steering
wheel all the way down and then all the way out so just pull
this part it's almost sealed shut it's really hard to find a gap
just pull this little part out and then twist
use the tool to twist it don't use your hand
and you might break the clips same thing on the other side
now you should be able to remove this whole thing out
this is a little tight right here to make sure
it stays in place just try to remove that out this one
right here there's nowhere to like remove this so i'll just cut it
because it doesn't do anything just the piece that
you know hold on to this in case this one
kind of you know fly out it would not fly out anywhere else just
just like this so it has nothing to do with the locking or clip
at all i'm just going to cut it now that we have the steering wheel column
cover removed this one right here just have to fish through the fishing
line again on this side it seems more
it seems easier to go through because the other side has the cable
so fishing through it will come down to this space
right over here that we open up so we have to
run this cable up into this space and then go up there
as you can see here i just tape up using electrical tape
um the wiring and to the fishing line now we have to pull this one
up onto the steering wheel column as you can see i pull it up
about this end right here i mean all you need
is just the two cable to plug in with the display so it's because it doesn't
have a lot of space to hide the cable here anyway so i'm just gonna
put about right here and let me take everything out so you can see better
as you can see here make sure you fish it through on the left side because the
left side has more space and then like the top part not the bottom part
so because the you see the plugs are quite a bit big for the space so
that's why i try to tell you to do on this side
because this side has a few cables there it's hard to get the cable fishing
through so on the left side and the next step here to attach the
display to the new steering wheel column cover
with the display attachments so make sure um
the wiring going through the wire holes on the back and then
just screw two screws in so one side's red one side's blue one for power one
for data you don't need the yellow one it's for
the front forward camera which model y juniper already has with the
car but this is the dual compatible version
which is compatible with should be compatible
with the model 3 highlands 2 because model 3 highland doesn't have the camera
so you have that option for the model 3 highland all right so this is the last
step here i'm not sure if i mentioned before this one has a built-in speaker
and the usb-c port for optional software update with the usb-c
dongle all right so now we just have to plug in
the two so red to red blue to blue just leave the yellow alone if you have
the model y juniper so just plug in red first
that's the power and here's the data this is the data all right so both are
in the graphics and the display is started
now we just have to make sure it's plugged in
nice and tight so it doesn't get loose accidentally get loose
and now just shuffle the wiring back into the space
make sure the yellow one doesn't get to the way when you
try to install back the single column now we just have to install it back in
so just see it looks really simple you just
pop it in and make sure it goes into the right spot
and same thing on this side too on the other side too
all right and that's it the installation
is done now all i have to do is just put all the panels
back in place all right the installation is done it's a little bit
more complicated than the previous two displays that i
have installed before because those two you just have to remove the
dashboard cover on the top this one right here but this
one you have to remove those two panels well
the panel on the bottom side this side and then this
panel right here the installation is done let me show you
really really good in the new model y juniper
i have installed exact or if not it's similar display
in the older model y too and it's also sits on a single column and this is
probably the most oem looking display out there in the market because
it looks like it's built in on the column and it looks like it came from
the factory because the rest of the display
installed right here cover up the air vent
in front of you but this one sits out about six inches further out from the
air vent so it has space for the air flow to go
over or come through now let me show you a
demo how the airflow is after installing this t8 display right now
let's test out the airflow this is the a4 paper so it has some
weight to it adjust the airflow to go up above so
this is number five and you still can get the airflow up here but
not down here since the display is blocking in between the space
of the steering wheel but usually my head is right here
so it's a little above i still can't get the airflow
up over here as you can see right there so
just try that just around the display and you still can get the airflow through
in your face and let me try number 10 here we go so number 10 as you can see
the airflow still going through really really well
strong really strong airflow up here even out here so you can get the
airflow but not down here of course so you have to adjust the ac up a little
bit as you can see with this display you still
somewhat get the airflow above the display because it's really low profile
as you can see really low profile and wide and airflow
still can come up here and then to your face especially in hot
summer all right now let's go through the menus
and setting real quick as you can see this is overall look of
the main screen this is this display only has one ui
it's really really simple display but it has all the information that you need so
all the warning lights on this side the gear selection on this
side speedometer really big on the right hand
side and then the car status right here and you have the percentage on
the battery ergometer and the range in miles
time and the temperature outside right now
and here's how you can go to the setting on the right hand side just
swipe and then just select right here and then we'll go to the setting so you
have general language time format and then this is
for the front forward camera we do not have it so we just turn it off and then
steering wheel control which is this right steering
wheel right here so you can turn it off or turn it on also
tire pressure unit time zone so you have to
adjust the sound zone to fit your location
and the next option is the car color so you can select different color paint
this is my car oh it has a lot of color actually
so it has white flaming red let's try that and so that's the red
color looks really good quick silver this is probably the best
looking graphic on the car compared to the two display
that i have reviewed before even though it's
smallest but damn look at the graphic and the coloring of that quick
silver looks just like the real car and let's change to
the glacier blue okay so that's the asian
and european color we do not have that color here but it looks really really
nice and last but not least the metallic gray color here you go so
it's almost like black but it doesn't have black
color but you can actually use this gray color
for your black car because it's really really dark
and yeah those are the colors for the car let's go back to the display again
and you can change the fahrenheit or celsius
which is you know daytime or dark mode or day mode
i just select auto or just follow the main
display here and one more thing is rainbow road so rainbow road
meaning when you turn on the autopilot or fsd
then it will show the rainbow road in the middle of lane of the car
and next is wireless so you have you can select between carplay
or android auto and then steering wheel warning
um autopilot warning i think that's what it is and then
um speed limit sign you have to select either american
or universal which is the rest of the world which is circle
uh american is rectangle and the audio mode
hud which is this display or the phone i'm just going to cancel that for now so
before you connect a software update you would have to connect
the wi-fi first so make sure you connect the wi-fi
and then connect software update after you're done with software update you can
disconnect the wi-fi otherwise i think you would have
difficult times connecting the apple carplay
so you can check the software update here you can software update wirelessly
through the wi-fi and directly to the display itself so you don't have to
connect to the phone and yeah that's it all the setting it's
really simple you can change to um however setting you want so this
display also has an apple carplay capability so you just have to swipe on
the right and then select this one right here this
one right here my bad that's so now it will tell you the
direction how to connect to apple carplay so on your phone
just find that bluetooth name in your bluetooth
setting and then just select and then after that
i will ask to connect to the phone and then connect the carplay
and then it should be connected here we go so now it's connected
to the display as you can see and looks really clean because the display is
low profile but it's really wide so you have
quite a bit of space for the apple carplay and it's still showing
all the information on the car now with the apple carplay i can use all the
compatible apps that is compatible with apple carplay
of course you cannot watch any streaming service
up here with the apple carplay for your safety purpose
and you can use you know the apps like maps
or google maps amazon music or any music streaming that you like
or ways as you can see here so now i have an option to not only use
the regular map on tesla because tesla always have issue with
the app sometimes when you go to places like road trip a lot of time
tesla maps direct to the wrong direction or destination so a lot of
time i use my phone to you know try to get
the optional maps to some places when we do a road trip
so now it's more convenient just to have the
maps app up here on my instrument cluster display
now let's test out the streaming service app like amazon music
in order to output the song through the car speaker you have to go to your
phone setting just swipe down and then go to
bluetooth selection here and then just select your car
output and then in your car just select bluetooth output here and if you
after you do that when you play
then the sound output will come out from the car speakers
which is a lot more convenient also the voice on the maps apps
will come out from the car speakers too to go back
to the main display while you're on apple carplay
just swipe on the right and then select here
and then again go back to apple carplay or you can do it easier way
which is the steering wheel button right here so just swipe
up or down then you go back to apple carplay
again go back to the main display and as i mentioned before you can connect
more than one device to the same obd port because i have
the n7 cluster display and 16 knob connected
the full review of the 16 knob for the motorway juniper
is coming soon now let's go and test it out while i drive the car
with all the functions because this display has a blind spot warning
both inactive and active also autopilot warning
now let's go test it out now see what looks like while i drive the car as you
can see here this is my pov view it's perfectly fit on that steering
wheel space on the top let's go
i love how big the speedometer is as you can see it's really really good
size speedometer so you don't really want to look back
on the main display if the speedometer is
big enough then you're it kind of leaves your eyes
in front of the steering wheel love the graphic
it's really nice and clean and you have the speed limit right here on the right
hand side which matches the speed limit on the
main display and when the car comes to complete stop it will show all
the psi or tire pressure one more thing that i can tell from this display is the
white balance on the background of the display compared to the main
display of course in the camera it's stronger difference
it's cooler white balance on the t8 but it is warmer on the main
display now let's go out and test out the blind spot warning as you can see
there's a car on the left hand side and it will
show orange tab on the left to show that it's blind spot
there's a car on on my blind spot i know the car
itself has that little dot blind spot but
come on it's way too small to notice and then if i
put on the turn signal i would change to red as you can see
so that's active and inactive is orange here's that orange tab again
and here's the blind spot waiting on the right hand side as you can see
this car is showing blind spot if i turn the signal
it'll change to red and here what looks like
when you turn on the autopilot as you can see the lane is turning blue
and you have the autopilot indicator blue right there
and if i keep looking at the phone recording this it will show the
warning about now now let's check out the google
map on apple cafe as you can see it's it's
quite big enough to see the details and
of course you know the turning where you need to turn
i like it how you know they have a big font and different color when you need
to change the directions or change the
highway or freeway but on this tesla main display
not quite so it's a lot smaller and it's really hard to see so that's
another thing that i like about the map on the apple cafe
better than the main display and of course you still have
all the car information on the right hand side
now let's see what it looks like at night
so the display is not that much brighter than
the main display in the model y as you can see here because i set it on
auto so it should follow the brightness of
the main display and this is the apple cafe
with google mapped at night as you can see in the video this
brand new t8 8 inch instrument cluster display
for the new model y juniper offers pretty much
all the functions that you need for a really affordable
price it has blind spot warning both active and inactive with autopilot
warning and all the information that you need
in front of you and also apple cafe and android auto let
me know in comment let me know in the comment down below
what you think about this brand new display
for model y juniper i'll make sure to put the link
of this display in the description down below and special discount code for you
thank you so much guys for watching today's video make sure to
click like if you like the video make sure to subscribe for more awesome
contents like this we'll see you on the next video peace
please tell me that i can't that i won't that i fail that i'll never make it out
yeah please tell me all the bad never good
fill my head full of every single doubt yeah please say any negative thoughts i
pop off when i hear people say i cannot i get off to the thought of proving
everyone wrong i won't stop to the top so you better back off and get lost
i'ma stay last stay proud never running now never heading south
i'll be spreading now