Navy SEAL “Coch’s” Career in SOPMOD

Tactical Military Gear & Gadgets
4 followers
SOPMOD refers to Special Operations Peculiar MODification kit.
The purpose behind SOPMOD is to provide rifles with the flexibility and versatility to adapt basic issue weapons to meet mission-specific requirements.
#TacticalGear #MilitaryGear #TacticalOptics #AimingSystems #SOPMOD #Mk18 #SOFClone #WeaponLights #PEQ15 #NightOptics #SpecialOperations
AI Generated·May contain errors
Video Summary
AI GeneratedCoach from Tactical Hive discusses the evolution of sighting systems and weapon accessories used throughout his career, tracing the transition from basic iron sights to the sophisticated, modular SOPMOD systems. He emphasizes the ongoing trend toward miniaturization, increased durability, and improved battery life to enhance operational efficiency.
Hey it's Coach with Tactical Hive.
As you can see I'm out on the range today.
I'm in suburbia and apparently
Fairly close, so we're going to have to deal with the noise.
there's some construction going on.
Anyway, today I want to talk
to you about sighting systems that I used over my career.
We started off with iron sights, like,
you know, since guns were invented.
And then in the mid to late 80s,
these new innovations started coming in.
Guys started looking around
and seeing these red dot sights that sports shooters were using.
So this is the Aimpoint 5000.
This is what I got when I got to Gold Squadron in the mid 90s.
There were other...
This was a Seymour. Again, it's made of plastic.
It's kind of like your, it's like a giant doctor sight.
You know, again, sports shooters used them.
It gave you the ability to, instead of focusing on the front sight,
you could focus on the threat and just put the red dot on the threat.
And it kept your focus down.
You have to pull back to get that front sight focus that we talk about
when you're dealing with iron sights.
The other thing here was the light.
This light was revolutionary.
It was small and powerful for the time. Remember you're talking
you know late 90s here. 60 lumens we thought was really cool
and we didn't know better than to bolt this stuff to the barrel.
Again we're just innovating,
thinking okay what's the capability that I want?
I want something that I can, you know, see at night.
Lights up my either my iron sights
or my red dot, you know, on the target.
I get a good positive ID on there.
Quick side note on this. This was the original Surefire.
I'm not sure of the model.
And then as we went through the, through time, you know.
Things got a little bit beefier.
They added cool little pigtails and stuff like that if you wanted
to use them. I was more partial to just having that clicky on there.
And then they started
getting big. They started getting a little more robust.
And I think this is probably the biggest
one they came out with. It was enormous.
It was bright as hell. It had three batteries in it.
Again, just too big. We didn't need this. Things got better.
But initially this was awesome because
when I was at SEAL Team 5 occasionally we'd put mag lights
and we'd you know pipe clamp those to your MP5
and no optics we just use that to illuminate the target
and you're able to see your iron sights on the target.
So this was where the innovation was there.
We wanted to make something that could do more than
just your standard iron sighted gun.
So in the late 90s, they started looking at this and testing
pieces for it, right?
By 99, they came out with the SOPMOD Block 1, what we know now, right?
And that was like this basket that you could throw
a bunch of pieces of equipment in there, right?
So you had lights and lasers, sighting systems, other accessories.
SOPMOD stands for Special Operations Peculiar Modifications.
So this is not something that your regular
army guys would need, your regular line guys.
No, this was, you know, basically for us.
You know, we started using NODs.
The PEQ-2 here.
This thing has an IR flood and an IR pointer laser.
So on NODs, you don't have to bring this up.
You just hold it right about here, you know, into your shoulder.
And you're looking over the top of it
and you're projecting that dot in the big flood.
So you can actually see what the hell was going on.
You knew where the bullet was going to go,
you know, wherever that dot was.
The rail here is the next thing.
This was the Knight's Armament made this rail system.
So it replaced your foregrip.
You know, it's fairly robust,
but you could now attach things to it instead of the barrel.
So your barrel harmonics were better,
and it didn't start messing with your point of
impact by attaching things to the barrel,
which we now know is not a good idea.
So instead of clamping that sucker
to the barrel I can just clip it on to the rail system.
The Comp M2 now instead of being up there
on that carry handle it's now down. It's mounted on this
the rail here. We got rid of the carry handle
and we have a rail up here. So I've
mounted this on the rail and now it's co-witnessed.
So I can look through these iron sights and
the red dot should line up right perfectly
with that front sight post. So now
I can now look at the threat
and not worry about pulling my focus back to that front sight.
But again, still not trusting these because the battery life was,
you know, not what it is now.
So if this went down,
I had my irons there and I was used to shooting those anyway.
We had gunsmiths there at Team Six and they would set up
You know the gun however you want it.
The free floating tube, this is the first one
that I'd ever seen and that just keeps
everything just completely off of the
off the barrel. So from the barrel nut out nothing's touching it.
So now for that initially
there we just mount stuff onto this tube just screw it
in kind of like my sling attachment
point is just a hole drilled in there
and an eye bolt screwed in there. It works.
But it's, you know, you need somebody
who knows what the hell they're doing
and has the right equipment.
I can't just, in my cage, slap on and modify my gun like I can now.
So this was the CVL or the PEQ-5. So it's a visible red laser.
For what it was, red lasers are really good for,
you put it on a guy and it makes it personal, okay?
You know where that shot's gonna go.
Prior to SOPMOD, as things started developing,
and even while the SOPMOD program was going on,
you still had this stuff that was left over.
This is a 12 and a half inch barrel,
left over from what came before the CQBR.
And the CQBR was an upper receiver.
That you would mount, you know, at a 10.3, we call it a 10 inch,
whatever, a 10 inch barrel, and you would mount that onto your gun.
and use it for CQB was to replace the MP5 because,
you know, 5.56 out of a short barrel is still
good and you're shooting an intermediate rifle round instead
of a pistol round. So at close
range is what it was going to be used for.
It worked out just fine. What we did find though
is that nobody wanted to swap their uppers all the damn time.
So most everybody ran with two guns.
You'd have a gun that, you know,
if you're gonna go out hiking in the woods,
You could still use it for CQB, but it worked better.
Longer barrel, mount M203s, whatever else you needed on there,
you know, the size of the CAR-15.
Eventually, that evolved into the Mark 18 as we roll along here.
So part of the original Block 1 was the ACOG sight.
It's a four-power sight.
The optic gives you the ability
to actually see what's going on downrange.
And then it has a reticle in there
that's specifically made for the 5.56 round.
You have your bullet drop compensation in there.
So out to 400 yards, you could make a decent shot with this sucker.
Now originally, this thing had a rain sight is what they called it.
It's like a little iron sight, a little short radius up here.
And that was the idea that you would use that for CQB if you had to.
In the early 2000s, when I was at Warcom, we procured a bunch of these.
It's a doctor sight, it's a miniature red dot sight,
and it pretty much puts that red dot almost
in the same spot it was back on the carrying handle.
But what it gave you is, with a cheek weld,
you're looking through your telescopic sight at range,
and you get a decent shot there.
And then at close range, you'd have...
A chin weld and you're looking through there seeing the red dot
and it works just like your aim point.
Now as we moved on, this thing started getting a little chunkier.
We got here for the optic is a Nightforce two and a half to ten.
And again, we mount a doctor on there.
So again, you know, if you're a designated marksman,
this was going to be your sight.
The glass is awesome.
The thing is tough as nails.
One of the main reasons you want high quality glass
is if you're going to be staring through it all day long.
And that was the idea here as a DM.
You're up there either assisting the sniper
or you know you're there glassing. A lot of observation
was happening with this. Right now you could take the shot,
you got a positive ID, take the shot.
I think this gun is you know six, seven hundred yards all day long.
It'll perform. Now if you
got close in, you got your red dot.
As we progressed on, we went on to the block two.
On block two, they started taking some things out of the basket
and adding other things in.
So, Daniel Defense rail, they solidified the Mark 18 as the,
instead of the CQBR, you know,
everybody got the rifle and they call it a Mark 18,
right? And it came with
certain things on the list. They started upgrading,
the equipment. so the whole idea behind
the SOPMOD program is that you could bring these things
into it and then as they got obsolete you could push
them out. we wanted new and better capabilities
as it came in. so if you could miniaturize it,
ruggedize it, and waterproof it, whatever it was,
make it smaller, make it tougher,
and make it waterproof. along with that battery life increased
So, you know, nowadays, you know, red dot sights,
you change the battery on your birthday, maybe, you know,
rather than every time you went into the house.
Because you want to make sure that light was good, right?
Now we're getting a little spoiled.
They also combined some things.
So the ATPIL, the LA-5 PEC,
it combined basically the PEC-5 and the PEC-2 all in one package.
So you had your visible laser and your IR laser.
And the biggest boon to mankind on that one was you didn't have
to come in at night to sight in your IR laser.
You could just sight in your visible.
And it was...
on the same apparatus so it went to the same spot as your IR
so you could sight that sucker in and
you'd be good to go. As we continue on we're going
on to block three stuff is starting to show up now.
They're moving away
from that big Daniel Defense quad rail to a free-floated,
Daniel Defense was free-floated as well,
but they were cutting down the weight.
So we're going to M-LOK now because they did
their studies and they figured, okay,
that thing's the new best option.
And again, making things lighter and smaller.
The next generation laser is also coming out.
I think it's hitting the street here shortly.
If it's not out already by the time you guys see
this and it's about half the size of the ATPIL
and it has all the capabilities that the Atpil has.
So as we move forward into the future.
We want to keep that trend going,
making things smaller, tougher, waterproof, and battery
life is always a consideration.
As we move forward, hopefully that trend's going to continue.
We want as much capability as we can for the weight
and size of the weapons platform.
So as always, if you like this content,
like, subscribe, leave me a comment.
