My Smart Home Tour 2021
AI Generated·May contain errors
My smart home automation journey started back sometime in 2015 when I purchased the first
generation Amazon Echo device.
I believe this smart speaker was the first of its kind, and it pioneered the way for
other manufacturers to enter the market of voice controlled speakers.
Since then, I have purchased a few other models, and was able to put one in just about every
corner of my house.
But the one that I use the most is the second generation Echo Show 10, because it is conveniently
located on my kitchen countertop.
I enjoy seeing all of the photos that I have uploaded to my Amazon account, as well as
get news update and the daily forecast.
Although you can use the 10 inch touchscreen to control your smart home devices, I rarely
do this because I rather just control everything by voice.
Back in 2015, smart products such as light bulbs and plugs were pretty costly, but now
they are very affordable, and I even have a few spares stashed away.
These were previously used to control certain accessories, but I ended up changing a few
things out, so now I just store them until the next project comes along.
The newest smart accessory that I recently installed is the Kwikset Halo Touch fingerprint
deadbolt from our front door.
I previously had the Schlage smart lock, and while I had no issues with it, I thought the
fingerprint feature from the Halo Touch was neat, so I wanted to try it out.
The main difference between the two is that the Schlage connects via Z-Wave and requires
a hub, whereas the Kwikset is wifi enabled and does not need a hub.
The Halo Touch deadbolt works really well, and much faster than having to enter a numeric
code to lock or unlock.
By placing any unregistered finger, the door locks, and to unlock, simply use the finger
that you set up.
There are red and green LED indicators to let you know the lock and unlock status.
As you can see, it is very responsive, and according to Kwikset's website, fingerprints
are more secured when compared to a 4 digit pin code.
By using the Kwikset app, I am able to view a detailed lock history that shows if the
lock was accessed via fingerprint or manually with the knob.
I can also add up to 50 different users, check connection status, battery life, and receive
notifications for every time the lock is being used.
I do hope that in the near future, the Kwikset Halo Touch can be integrated into my ring
alarm system like the rest of my smart locks.
Now let's jump over to my security setup.
I am using the first generation ring alarm system.
I won't be getting into full details of everything this alarm can do, because then, this video
will probably be way too long.
The ring alarm has everything you would look for in a home security system, such as detailed
notifications, motion and contact sensors, rechargeable keypad, and so forth.
I have two keypads in my home, one near the front entryway, and another in my master bedroom.
The keypads are supposed to have a 6 month battery life on a single charge, but they
last much longer for me because I don't really use them.
I use the ring app for just about everything.
They connect to the base station via Z-Wave, so even if your network is down, they will
still function properly.
To keep an eye on things inside the home, I have multiple ring indoor cams scattered
around.
I have the motion detection and recording disabled when my alarm is set to disarmed,
and they turn on when I arm my alarm.
But this one here is located in my master bedroom, which is plugged into a smart plug
so that I can have the power completely cut off when I'm home, and only when I'm leaving
the house will it turn on.
One neat feature about this camera is that I am able to use the motion detection to trigger
a routine or a smart device using the Alexa app.
For example, when I enter my home office, the camera will detect motion and trigger
my LED light bars that I have installed behind my monitor.
And if no motion is detected for 10 minutes, the lights will then turn off.
There are countless ways to use this feature, but I kept it pretty simple.
For my outdoor surveillance, I am using the Ring Video Doorbell Pro, something that almost
every home in my neighborhood has.
And since I am subscribed to the Ring Protect Plus plan, I am able to save, share, or view
videos for up to 60 days.
At only $100 a year, the Plus plan allows me to add as many cameras as I like, and it
includes 24-7 professional monitoring for my Ring alarm system.
What's cool about the Ring Doorbell is if anyone rings it, my Echo Show alerts me and
shows me a live feed.
It's a great feature that conveniently allows you to see who's at your front door, like
this weird guy right here.
I also have the brilliant all-in-one smart home control in my office that also receives
the Ring notification.
This smart control replaces a 2-gang switch and adds a touchscreen as well as two touch
sliders that controls my ceiling fan and light.
I can also access all of my Ring cameras and control other smart devices.
For a full list of compatible products, please visit the link in the description below.
Aside from having the Ring Video Doorbell, I also installed 8 Zmoto PoE 1080p cameras
to monitor the perimeter outside my home.
These cameras are hardwired into a network video recorder that is equipped with a 6TB
hard drive, which allows me to record more than 30 days of footage and does not require
a subscription.
All 8 cameras are displayed on this wall-mounted Dell 32-inch monitor and toggles between 4
channels every 10 seconds.
I mounted the monitor with a very basic swivel and tilt mount, which allows me to slightly
adjust the viewing angle if needed.
The cameras can also be viewed on the Zmoto app, and I receive notifications for specific
motion detected areas whenever I am away from home.
A unique feature about the Zmoto app is that I am able to view 4 cameras at once, and with
a simple swipe, I can see the other 4.
The live view usually loads much faster than this, but it seems a little laggy today.
Zmoto has been around for a little over a decade, and I have used a lot of their products
in the past.
They offer quality cameras at an affordable price.
You can find a lot of their wireless cameras on Amazon, but the PoE system I am using is
no longer available, not even on their website.
Now let's go back and talk about what I have underneath my surveillance monitor.
To the right, there are a pair of smart dimmer switches.
The left switch controls my dining light, while the right one is for my kitchen.
These two switches are scheduled to have a decreased level of brightness 30 minutes after
sunset to prevent the lights from being too bright when it gets dark outside.
And on the left, I have an iPad 6 mounted on the wall using an accessory called the
iPod Lux.
The iPod Lux is a premium wireless charging and mounting system designed for a variety
of iPad models.
The Lux case is an aluminum enclosure with built-in magnets, and when mounted to the
wall station or base station, you get conductive charging without the messy cables.
The wall station has a slim profile, and is wired to a power source behind the wall.
There are pin connectors all around with strong magnets, so I am able to mount the iPad in
portrait or landscape mode.
I will sometimes use this iPad to read a brief news article or check the calendar for upcoming
events.
But what I mainly use it for is to play music throughout the house using the Spotify app.
Since I have an Amazon Echo just about everywhere, I am able to play music through all of them
from here.
It's very handy when you have a get-together.
And when I'm not using it, I usually just leave it on this clock app.
Tucked in this little nook at the center of my living area, I have the Dyson PureCool
fan.
The Dyson PureCool intelligently purifies the air while keeping the room cool as well.
You can select different rotation angles, and the built-in LCD screen shows you different
types of gases that are present in your space in real time.
Everything can be controlled with the Dyson remote, which attaches via magnet to the top,
although I wish the magnets were a little stronger because I have knocked over the remote
a few times by accident.
But to be honest, I never use the remote anyways, because I have it scheduled to turn on and
off during specific times of the day.
If I need to make any changes, I just use the Dyson Link app.
Keeping the air fresh is great, but keeping the floors clean is also a necessity in any
household.
For my weekly vacuums, I use the Dyson V11 Animal.
The cordless design makes it very convenient, and I'm able to vacuum my entire home on
a single charge.
But when it comes to those hard-to-reach spaces, or areas you normally can't clean with a
traditional vacuum, I put my Roomba to work.
This is the iRobot Roomba 980.
It is of course Wi-Fi enabled and app controlled, just like everything else I have mentioned
throughout this video so far.
Before this model, I had the 3rd generation 500 series, and it was not smart at all.
Even though it had infrared sensors to detect obstacles like this one, I never knew which
path it was going to go.
But the 980 has improved significantly.
This guy is equipped with smart mapping technology that keeps track of where it's been and
where it hasn't cleaned.
The slim design allows it to easily glide underneath my furniture, and tackle areas
I would never otherwise vacuum.
If you have pets, the multi-surface brush works really well, and it pulls in hair, dust,
and other debris without getting tangled.
You would be surprised at what this little thing picks up after a cleaning session.
And when it finishes taking care of the job, the Roomba automatically navigates back to
the dock and recharges itself.
The Roomba's docking station is located underneath my media center, which consists of a Klipsch
5.2.2 Dolby Atmos setup, and the LG CX 77-inch OLED TV.
I just recently purchased this TV about a week ago, so the Klipsch at the beginning
of this video was actually an older model Samsung TV.
And when I first got it set up, I couldn't decide between using LG's webOS or sticking
with my 5th gen Apple TV 4K that I recently purchased a couple of months ago.
But I finally decided to go with the Apple TV, because I prefer the compact remote and
the minimal interface.
I also created two iOS shortcuts, so that I am able to turn my TV off and on with my
Apple Watch.
I actually use this feature a lot, because I am always moving around when I'm at home,
and even though I could use my iPhone to control the Apple TV, this shortcut makes it much
faster.
Home automation has become a fundamental aspect of my everyday life, and one of the best upgrades
that I did this year was changing out all of my window blinds to smart ones.
These are the Grey Wind Zebra shades from Amazon.
They are custom made to order, so you're guaranteed a perfect fit for any window.
They provide about an 80% blackout, and thanks to the mesh fabric, you can let in light without
the heat and still keep your privacy.
If you would like to see how these were installed, I uploaded a video on my channel a couple
of months ago detailing the install in my home office, so check it out.
The Zebra shades not only look great, but they are motorized and connect to my Echo
Show 10 via Zigbee.
I can open or close a single or multiple shades at once, and to any percentage between 0-100,
all by voice.
But I can also use the remote which can be programmed to control up to 16 different windows.
The programming is very simple once you get the hang of it.
You can set a single channel to control one or multiple windows at once.
The motor has a built-in lithium battery that can last up to 6 months on a single charge.
You can manually charge the motor with the supplied power adapter, or you can purchase
the optional solar panel to make things easier.
Only half of my windows are using the solar panels, because the other half doesn't get
enough light.
These 3 windows in my master bedroom used to have 5 separate blinds, and it was a hassle
to open each one every time.
But now, just like everything else smart in my home, the shades are on a synchronized
schedule with my porch lights, as well as my indoor lamps.
I had a few friends over the other week, and 2 of them love the Zebra shades, and are planning
to upgrade their blinds soon.
The Greywind shades can get pretty costly, at about $350 or more per window.
But I shopped around for nearly a year, and other companies charge almost twice as much
for just motorized shades without the smart home integration.
At the end of the day, I think they were a great investment.
They really transform the space, and provide the windows with a more modern look.
Well, I'm going to wrap it up now.
Although there were a few other accessories I didn't get a chance to talk about today,
maybe it'll be something I can feature in a future video.
And as always, thank you so much for watching, and I hope you enjoyed this video.
Take care my friends.

