Micro Satchel #LeatherAddict EP78

craftsmangus
40 followers
34 Video Views·Nov 24, 2024
hi everybody today I will be making a
micro Satchel this tiny Satchel is great
for holding your credit cards your
trading cards your membership cards any
cards you
have so let's begin this is a so long
video patterns in the description below
after laying out your patterns on your
leather use the sharp all to draw and
trace on the leather and then cut to
pieces
to finish the edge on the veg tan
leather first use the
Sandpaper I use the edge beveler to make
sure that my edges are nicely rounded
you can also use the Sandpaper to sand
the rounded edges as
well I used the tokonole burnishing gum
to apply on the edges
[Music]
this and then use the canvas to
[Music]
burnish cut your paper pattern like what
you see here and then trace the position
on the
leather R in the smooth side of the
leather punch a hole where you apply the
button
and then install the buttons make sure
you use the right Setter for the buttons
that you
selected the buttons position are marked
on the pattern you want to install the
button on the main body back and the
front pocket
[Music]
[Music]
after installing the buttons make sure
you test it out before moving on to the
next step and now it's time to attach
the pockets to the main bodies apply
glues on the edges of the surfaces that
you want it to be attached make sure
that you wait until the glue is tacky
and dry and then you can stick them
[Music]
on and now we're ready to prepare for
sewing use the wing divid to draw the
Stitch
[Music]
line I recommend using the 4mm diamond
pricking iron for this
project then start sewing both of your
pockets to the main bodies
and now it's time to make the handle
Mark the position to be glued and then
glue use the 1.5 CM diameter for the
rectangle ring holder slide into the
position with no glue and then start
folding
[Music]
this is what the handle inside should
look
like scratch the smooth surface to
prepare for
glue apply glue to the handle inside and
the handle
wrap after the glue is dry you can start
pasting the handle wrap to the handle
inside
Stitch the middle to secure the position
and take the handle wrapper glue and
then wrap it around the rectangle ring
there you
[Music]
go use the pattern to Mark the position
where you'll be attaching the handle to
the main
body punch the hole to the position that
you just marked
make sure the whole size corresponds to
the rivet size that you're
using and now install the rivets using
the rivet
[Music]
Setter use the 1.5 CM diameter for the
earring
wrap the de-ring holder around
it use your pattern to Mark the whole
position and punch the
[Music]
hole and now we're ready to install the
deing holder to the cassette using
rivets
before you start pricking this is very
important make sure that you have the
same number of hole on the main body and
the cassette the pattern comes with a
4mm stitching Mark so if you're using
the 4mm diameter piing iron it will be
easy for you to use the pattern as guide
so after pricking the cassette and the
main body you can start sewing right
away
and now we finish our micro Satchel
projects thank you everybody for
watching this video please like And
subscribe and they'll see you next video
