Hey everyone. I really hope you liked this latest video. I tried to film in different style as usual. I was hoping to bring more quality content /more insights about the process. Don't forget that English is my second or third language and don't mind my strong James Bond villain accent 😉
Anyway i have a small game for you ☺
There were huge changes in this past year and for those first 20 viewers that will comment the first what is the biggest and most obvious change from my last video will receive a discount code for our store with 20% off. As i mentioned.. Is gotta be the biggest and most obvious change from last video 😉 (showing my face dosne't apply ) haha
As i mentioned i bought fev walnut logs and i had plenty of slabs in my shop. Once you have whole logs there are many benefits to it. And one of my favourite is that you can select slabs 2 and 2 so they go nice together and you can make bookmatch style furniture. I love when the pattern emerges. This was the main reason why i made this table.
When it comes to jointing the 2 halfs together i couldn't go with epoxy. There is just too much of that on YouTube. And i'm not fan of river style tables.
So as in my past projects i went with inlay. This time i put them very close together so the gap is very unnoticeable when table is used. All the routing wasd made free hand.
I also commissioned glass for this table and it will have identical shape as the walnut top.
All of the work was done by hand with electric tools etc.
For the finish I went in highsolid oil in 4 coats so the table is nicely protected and resistant to water etc.
This dining table will be put on market and available in fev day's in our store for those who might be interested. Link is above.
In this walnut table video I'm introducing company @starbond and their products. In full disclosure i become partner with the company. Not because of fev € that i can make but because i believe in the product and i know it's great.
You can always use SLOVENIAN WOODWORKER discount code for -10% off I explain everything in the video.
This past year without uploading went by very fast. I wished all the time to have time to upload more but .. I'm sorry guys i couldn't do it. As i said in the video all of that has changed now. New projects are already in the making and videos will be uploaded regularly.
Let me know what you like or don't like.. Al feedback is welcomed ☺ Let me know in the comments below.
There will be more pictures on my Instagram if you're interested.
Thank you for all your support!
It means a lot to me!
Stay safe !
Just a few words before we continue with this video.
Hey everyone, welcome back to my channel. It's been a while since my
last video, but for the reasons and the things that were going on at the time
I simply couldn't upload more. But all of that is going to change.
I'm so happy and grateful that I finally have time to start filming and produce
more videos and upload them on a more regular basis.
For all of you who stayed with me so far, thank you for your kind words and your
emails. It really means a lot to me and I hope
you're going to like this video too. So, without further delay, let's go.
I had a bit of luck and I found some really nice walnut.
Since I bought a whole log, I can select the pieces and I decided to make a
bookmatch table. The problem is that the walnut slabs are wider than my
joint on a plane I can take and in order to make this happen I will
have to improvise. That's why I took this kitchen countertop
because it's thick and it will give some stability. I'm gonna put my walnut boards
up, fix them so they won't wobble and then
I'm gonna put it to the drum sander. This drum sander doesn't have a cutter
head as a jointer has, but it works in a similar way. It needs
one side flat as a reference, same as a planer.
Well, with many passes to the machine, up and down, up and down,
I have one straight flat side and now I'm gonna flip it over
It took some time to flatten the boards, but now they are done
and here I am marking a line so later I can square up the ends.
To have slabs in place and at the right distance, I will mount up
plywood holders here and this will hold up the slabs while I'm working on them.
Before I put walnut slabs together, I will sand inner edges on both slabs
because later, once everything is together, that will be very difficult.
I was ripping this maple when suddenly I had very very strong squeeze.
This is not that uncommon and it can be really dangerous.
The worst thing that you can do is to run away from it.
You can see how I wedge a push stick under it so it doesn't hit down
if the blade catches it again. I turn the saw off
and then I remove it. Most of the times this happens because of there's too much
tension in the wood. This is very typical for a vacuum dried
wood because it dries very quickly and the tension builds up.
So all the maple pieces are now cut, they're almost the same size,
let's say 20 by 20 millimeters, and all I have to do now is put them in the table.
The line that I'm drawing, it will be my reference
to mark all the maple pieces once I put them on the table.
So the inner pieces look more natural, let's say natural.
I will mark and I will run over each corner of each piece
because it will be easier to put them into table and it will look better.
Because there's almost 60 pieces I made sure that each piece is marked so it can
be put back on the same spot. Then the fun part
begin. I route out every slab with the router
freehand. Since I run over every piece before,
now I can finish everything with the router.
Well it looks boring but trust me I was bored the most.
To finish everything it took me around four hours
and I was already happy that it's finally over
until I realized that I made a mistake. Do you see it?
Well this slot here is going in opposite direction.
Luckily I found this before I put the maple in.
I fix this by making new piece slightly larger
and then I reroute the slot. This table now is around 115
centimeters wide which is a few centimeters more
than my drum sander can take. In order to go into the drum sander
I measured 110 centimeters and draw the line.
With the cut off transfer the shape on the other side
and then I repeat the cut. This way without complications
both sides are mirroring each other.
I was a bit lazy to change the sandpaper in my
big drum sander. That's why I'm using belt sander
for more fine sanding. Before I'm moving forward with the table
I want to mention a few words regarding today glue that I'm using.
I don't know if you remember but some time ago in one of my earliest videos I
mentioned that if I ever receive any kind of offers
I'll accept only those who can help my viewers and
that I actually believe they are good. And I received many many emails with
business proposals and whatnot for some reason mostly from
Nigerian royalty and their vast quantities of gold abroad.
With all jokes aside I was contacted by a company Starbond.
Starbond is a company that specializes in CA glues
and in this video I'm going to show you how to use it and why it's so good.
I know every epoxy can be used for filling voids and cracks
but who has time for that when you have something better on hand.
All of that small voids and defects will be fixed in minutes
instead of hours or days. This is one of the glues that Starbond makes.
It is brown and more liquid-like so it penetrates really good
into wood. Package includes a desired CA glue,
activator, a detailed step-by-step guide and other accessories.
You simply pour it carefully into a void or desired place,
spray a little bit of activator, wait a few seconds,
add a bit more if necessary and you're done.
If you want to learn more about it and if you are interested in this
super glue please visit the link in the video description and be sure to use a
promo code SlovenianWoodworker to get a percentage off on your purchase.
There it is guys, table is finally finished. It took me a bit longer than I
was expecting but I'm really happy how this table turned out.
I especially love the contrast between maple and walnut,
it goes together really well, especially this walnut grain
and the color is absolutely amazing. So guys, tell me what you think about this
project, what you like, what you didn't like and
how did you like this video. Thank you for stopping by, hit the like
button and as always thank you for watching.