Make Chocolate at Home with No Fancy Tools

King food
131 followers
21 Video Views·Oct 27, 2022
From the world-famous Hershey's to up-and-coming craft chocolate makers, we can all agree
there's few things in the world that's better than a good old chocolate bar.
A perfect chocolate bar, in my opinion, has to be shiny on the surface,
has to have a crisp snap, and it needs to melt in your mouth, not your hands.
The pros are using heavy automated machinery, and those tools can be very, very expensive.
We're going to show you how to make high-quality chocolate at home with the tools you already have.
Let's talk about where chocolate comes from. Chocolate starts off with the fruit, the cacao.
That fruit is then processed and fermented. After fermentation, it's dried out in the sun.
So from here, though, this is when it's shipped all around the world to different chocolatiers.
They roast it to develop their complex flavors that are unique to their bar.
Then it goes through a winnowing process.
That process is essentially removing the hull from the bean.
There, you have the cocoa nib.
So once you have your nibs, it's then combined with the cocoa fat and sugar.
Then it's ground very, very fine with a conch or a ball mill.
Once you nail that, go into temper, and that's what you make your chocolate bar.
So the first thing I think that's really kind of cool to look at is
understanding the percentage that you're finding on your chocolate bar.
85% pure dark chocolate. That's exciting.
And this is cocoa beans, sugar.
And that's it. Yeah.
So it's three ingredients. We've seen that across the board with all dark chocolates.
So those three ingredients, like we just talked about, cocoa butter,
cocoa solids, and then you're going to have the sugar.
So it's about processing them to the right form and then also tempering later.
What's the challenge, though?
So the challenge is grinding the cocoa nib fine enough.
So what is a micron?
A micron is a millionth of a meter.
What you do is you add a little bit of chocolate there.
When it's warmed up in a fluid state, you scrape it down.
And this is going to give you a window about how close your micron actually is to your goal target.
Anything above that, that's where the palate is going to pick up on the texture.
And that texture is commonly associated with grittiness.
So this is where our research journey started at ChefSteps, with the conch.
Conchs are efficient at what they do.
We're not arguing that.
But the goal was to make it with tools that we already have at home.
So what tools do we have in our kitchen already that grind really well?
So a blender was the first thing that came to mind.
The blender was actually pretty interesting in results that we achieved with it.
We asked ourselves, could we just skip the grinding process altogether and use more
refined ingredients that got us as close as possible to the conch?
The results were good.
Cocoa powder.
This is from Tanzania.
It is single origin and it's undutched.
Undutched is really important for the cocoa powder and the type you want to use.
So during the Dutch making a process of cocoa powder,
what they're doing is they're raising the pH of it, making it more alkaline.
So that's going to neutralize some of the flavors and the acidity.
But it doesn't have that unique artisan flavor that I was going for.
Here we have our powdered sugar.
We needed to find a way to get our sugar fine enough.
And because we couldn't get there blending it,
we decided to use confectioner's sugar because it's already very fine in powder.
We were a little bit concerned about there being cornstarch present in it,
but it didn't affect the flavor or the texture during the tempering.
So we were green lit on this guy.
Cool. We're at the fun part.
We get to make chocolate now.
So the first part in making a good chocolate bar is we have to make our chocolate liqueur.
That's the base.
So we have our cocoa powder already ground for us.
We have our powdered sugar.
It's the finest version you can find it on the market.
And then we have our cocoa butter or cocoa fat.
To get this going, we're going to heat up our induction unit.
We're going to keep the temperature low at around 120.
This could take 5 or 10 minutes.
So get this going first.
So the importance of doing this low and slow
is it's all about getting your crystals in the right formation.
So while that's melting, we can get our powders done.
So we're going to combine our cocoa powder,
pre-shelled powdered sugar.
Whisk this up.
So we're just going to keep whisking it until it looks evenly incorporated.
We're going to sieve it and that's going to remove clumps
and also help it mix a little bit more.
I like to use parchment.
You could do this into another bowl.
That's a good thing.
Get those chunks.
We don't want chunks.
So you can even see there's still some bigger chunks here, but powdered sugar.
You could do the sieving twice or find a finer mesh one.
Up to you.
Give this a little mix.
Resist the urge to turn it up.
Keep it low and slow.
Our surface temperature is around 120 degrees Fahrenheit.
Here we go.
I like to go slow with this and add it in four stages.
That helps to keep it from clumping, but also as you're adding the powder,
the cocoa fat will want to seize up and temperature is key for the crystal formation.
If you go too hot, everything's out of whack.
I'm not really interested in whipping this.
So just go slow, mix it in at an even rate.
I'm not looking to incorporate a bunch of air.
Sometimes I like to rock it around and see if there's some chunks in there.
I'm making chocolate here.
Gotta have it smooth, silky, gorgeous.
Whenever I'm mixing in powders, I kind of like to start in the middle
and gently mix here because if you start with these wide strokes,
just because of how fine the powder is,
sometimes it'll kind of clump and just kind of pop and then you get your powder everywhere.
I trust the control freak, but if I was using just a normal induction burner or a gas burner,
I would probably have a probe in there to monitor it.
So there it is.
We have all of our ingredients incorporated now.
Cocoa fat, solids, and sugar.
So the base is done and we're going to move on to tempering.
So what is tempering and why do I want to do it?
Chocolate forms six types of crystal structures.
They each have different melting points.
The one we want has one of the highest melting points.
So we raise up the temperature to melt away the crystals we don't want.
When we cool the chocolate slowly, more of the crystals we do want will form,
making our chocolate shiny and crisp.
So if you don't temper your bar, it's going to end up being very matte in color,
melt at a lower temperature, and lack that snap and shine that we really want.
So there's many different ways you can temper.
You can either do it by hand on a marble surface.
You can do it in an automated machine.
So we use Joule to temper because it is very precise and that is so important when tempering.
We have a lot more information on this at ChefSteps.com,
so check it out, but let's start making some bars.
So our chocolate's tempered now.
We're ready to cast.
So casting is my favorite part of the process
because this is what turns your fluid chocolate into a beautiful bar.
Molds are available online all over the place.
We have some links provided in the recipe, so check those out.
But you can also cast these onto a tray if you just want to make a bunch of bark,
add some nuts to it or whatever you want.
But here we want a perfect looking bar.
So the first step in this is we like to brush our molds with some of the tempered chocolate.
So that's going to fill in all the little nooks and crannies,
so that way we don't have any air pockets.
So you have a very small window of temperature here and time.
You want to be working quick.
That's going to allow the best looking bar with the best sheen.
This is definitely a labor of love.
So you want your bench scraper to be perfectly flat with the mold.
Any excess chocolate around it is going to raise it during that final scrape.
So you've already put all the work into this.
Let's just put that little bit of extra care.
We probably have enough chocolate for two sets of molds,
but we're just going to do one right now.
Tap to remove the air bubbles.
Great.
Just like before.
There you have it.
We're going to let this sit for about two hours,
and then we're going to unmold them and see how they look.
We want to make sure we achieve the results of a beautiful shine,
crisp texture, and it melts in your mouth, not your hands.
So let's check it out.
So these are ours right off the bat.
I already say that they're prettier, but let's do the mold.
So we got Hershey's.
Not bad.
Not perfect.
Okay, here we go.
There's like a light crisp sound.
Ours.
Oh, that was pretty good.
Let's check out the mouthfeel now.
Hershey's.
It's okay flavor.
It's the flavor I'm used to, but it's kind of muddy.
There's no one note that's jumping out.
Let's try this one.
I think I'm going to be pretty impressed with the artisanal one.
Slower melt.
Good texture.
I get kind of like a fresh cherry pit flavor.
It's very fruity in the end.
So this is pretty good.
Let's check out ours.
Let's see.
Little bit of texture on the tooth.
It's really, really good though.
The flavor is my favorite by far across the board.
Way better than Hershey's.
So there's three things we were looking for.
Mouthfeel, shine, and texture.
We went on two of those.
The one area we fell a little short is the grind size.
This bar, in my opinion, is a win.
Please give it a try.
Go to chefsepps.com for the recipe.
