Leather Minutes ep13 Wrapping Button

craftsmangus
40 followers
40 Video Views·Aug 17, 2024
hi
everyone from Shai Thailand today I will
teach you how to wrap the buttons with
the leather from this into
this and to the project like this a coin
purse or a card
case in this video I also give you the
free patterns so see the more details
link below so you can get download the
free one and if you prefer I also have
other pattern to see you can browse up
with um yeah with the
link so let's see how
so first of all you just print the
button you want to use and use the sky
leather as a
measurement hold in the position about a
half about the mids of
the buttons it is
28 mm we will draw onto the leather then
you see this one is 28 mm just place it
down use the pan or pencil you want draw
that in case for help place the button
in the middle
to hold it and just draw the center
line it will help when you place the
glue over it
don't worry if it's not full that's okay
and then I will cut this
[Music]
one so I will place the glue into this
position okay I use rubber
[Music]
glue and about this
two like
this okay leave it until it's drop dry
really really
dry then you just put it
here in the middle
again and we will apply glue more onto
the underneath the buttons and uh the
rest of this
orbit this
way and just have to wait until it's dry
again then there is some tool rules
helper I have lots of the circle
template like this so it will help you
easier to be fold in first hold the
buttons like this and find
it until you find the smallest one like
this okay so this is the smallest
[Music]
one let it
through so it will be like
the kind of flower
thingy and then I will use the round on
like this to
help first just press
down and press
down and go
in down this down somewhat is loose like
it's no worries just force them down I
again and the last one force
down
okay okay and then put the round all in
the
middle press again the tip of the round
all in the middle press
again in Middle press okay in the middle
press it
again the middle press it again and the
middle
I just use
my thumb and finger
[Music]
hole like
this use the bone
folder like
this to make it chair Brown on the
outside and then press
it this time the bone folder will uh
press more wider um area then the round
also so the glue on the leather the glue
on the leather will be attach with the
glue at the back of the button easier
there we
are so after we have the buttons we will
test on the project which I give you the
links where the button is little dots
here on this position you
go and the button another side other
buttons set there
okay
[Music]
Mallet here we go
[Music]
oh I'm on the backside skyp here too in
case of folding they will help the ho
not to be slipped off from some hinge on
it
[Music]
[Music]
so thank you for watching and doing the
project right along with me so you can
grab the buttons to make the project
more value on it if you see me at the
first time please consider like
subscribe and share uh I will drop a new
video every 900 p.m. Thailand time so
thank you again and see you next time
