Kreg Circular Saw Jig #kreg #kregtools

Mr Geoffrey Smith
129 followers
1 Video View·May 26, 2025
I bought a Kreg jig for my circular saw.
Yeah, I've uh worn myself a little prey.
Bloody expensive little bits them for
what they are. But that's life. Anyway,
you've seen the thumbnail. It's a jig
from a circular saw. And the unboxing,
believe me, was hilarious. Have a look.
Yeah. So, what's happening? So, we're
going to open this box. Going to open
the box. Yeah. So, we have to press
something down. Should we? Uh, this not
good for children.
I'll do this bit then, shall I? You're
doing well. Now, we have to Now we have
But why do you get to cut on your
finger? That was from yesterday.
Oh, that's a big cut. Now we have to
hold on to the box. Okay. What's inside?
I don't know.
Now recording
camera. That's a long paper. What's the
next bit? I don't know.
What is that? The juice. No juice. What
is that?
What is that? Wow. Now, this is
something you put on a surplus saw,
huh?
We have to open the open the packaging,
won't we?
Yeah. Yeah.
So, should we cut this bit? Yeah. We
have to think. We have to test it out.
How do we even open this box? With the
knife again. What? What? I hold on. You
hold it.
[Music]
I'm coming back. Okay.
water inside. So, there's more again. It
says you have to put it on the side.
This is the bit with the saw. The saw is
fixed to that.
It says we need instructions to help us.
So, this is this piece here. Ooh, this
looks awesome. There's two screws in
there. Some screws. Yeah. I need them
then. Yeah, actually need them. I know.
Actually need
And then we got
got this long piece. Wow. Wow. This is
big. And this has got piece things on to
for measuring. See the numbers? Yeah.
Okay. Let's let's see how many pieces
this big thing. Yeah.
Funny. He's a charmer. Anyway, this is
how it
works. You saw gets on there. These
clamp it down. Then
this on here will be measuring bits if
you want to use
them. So that slides up and down and
then you clamp it down to where you want
it. And
this on whichever end you want. This
this this end on this one. And that's
your
90°. Yeah, I know. I'll put it together
and I'll show you.
[Music]
[Music]
[Music]
Heat. Heat.
[Music]
[Music]
Let's hope it stays that way. Right,
let's attach the saw.
Okay, this is how it works. You got
these two clamps
here, and you use this bolt here to
clamp down onto the saw in two places.
That keeps it solid. This is a regrim
bit. You put that next, you fit that
there. So when you take the saw off and
you want to put it back on again, it
goes in the same
space. Whatever that's clamped tight. My
saw has this
little bit here. So the whole shoe
doesn't fit level flush with this. So
I've just made sure using these lines
here that it's 90°. So that means that
when it's on
this, it'll cut properly. Let's find
that out now.
[Music]
[Music]
9 and a half though I've set it at 10.
Something's
not in alignment with each
whatever. Let's have a
look. So, the blade is 9 and a half away
from the from the edge there, which
means the uh the guide measurement guide
thing on the top is out. But, you know
what?
I'd rather just measure this like
that cuz then I know it's right instead
of trusting the thing on
top. So that's how I'm going to use it.
Let's put it at 10 and see if it cuts at
10 when I set it at 10 like this. Yeah.
Now the blade is 10 cm away from the
edge. Let's try and cut again.
Heat. Heat.
work that time. Just a little alignment
thing. Now you can set the uh let's go
and get it soing
waffle. You can uh reset that so it is
in line. But then every time I take the
saw off to do something else and put it
back again, I'm going to have to reset
it every time. So, I'd rather just
measure the blade to the edge, but
that's just me. Uh, smooth. It
uh it glided along lovely. Didn't catch
on the edge at all.
Um, yeah, I'm quite chuffed with it
actually. Well, you've seen me loads and
loads of times before
uh just using um straight edges, metal
edges and that. And sometimes I don't
put them right. Sometimes I'm a little
bit out. So maybe this will just uh
straighten me out a bit. I'm on the
straight and narrow. Can you believe it?
No. Uh right. I'm going to play with
it. Heat.
Heat.
Heat. Heat.
Bye. Eight.
