【ibisPaint】I made a paper stand!【DIY】
2 回視聴·2024/05/30
I made a super easy paper stand using ibisPaint and an online printing service!
Download:https://ibispaint.com/download.jsp
🔻 Follow Me 🔻
Twitter https://twitter.com/ibisPaint/media
Facebook https://www.facebook.com/ibisPaint/
Instagram https://www.instagram.com/ibispaint_o...
TikTok https://vt.tiktok.com/ZSJExKawH/
ibispaint.com https://ibispaint.com/about.jsp
Threads https://www.threads.net/@ibispaint_official
00:00 OP
00:04 Creating a new canvas
00:18 Importing the illustration
00:32 Adding the outline
01:17 Putting on a pedestal
02:10 Adding a pattern to the pedestal
02:38 Drawing the background
03:07 Saving the image
03:16 Printing
03:31 Assembling
04:01 The size
04:10 Using L-format vertically
04:20 Strengthening
04:53 The size
I made a paper stand using ibisPaint and online printing!
First, let's create a canvas!
Tap on “+” in the lower left corner.
Change the size here.
This time I want to print on L-format photo paper, so let’s set it to 1524 x 1074.
Tap OK after entering the size!
Once the canvas is created, let’s import the illustration.
Open the Layer window and select the image you want to print from the camera icon.
Change the background to a black one. ・Easy to work on ・Allows you to check if the background is transparent
Next, let’s add the outline!
Tap here and select Filter
Select Stroke (Outer) from the Style category.
Adjust width!
Tap here to change to white
Next, select the layer below the image layer you added the outline to.
Now let’s adjust the bottom shape!
If you are concerned about the blank spaces in-between, fill them in at this stage!
If you want to cut out these places too, you can leave it as it is!
When the painting is done, merge the layers.
Select the upper layer and tap here to complete the merge!
Next, let’s put it on a pedestal!
The first step is to adjust the position and size!
Tap here and select Transform!
Since we need some space to draw the pedestal, let's move it a little higher up.
Open the Layer window and add a new layer via “+”.
Move it below the illustration layer.
Tap the finger icon at the top and select a square from the Drawing Tool menu.
Turn on Fill and Fill with Current Color!
Open the Brush window and change the brush to Felt Tip Pen (Hard).
Open the Color window and change to a color other than white or black that is easier to see.
Draw a square along the screen!
Adjust the position so that the bottom part of the illustration is in the middle of the pedestal.
By the way, If you draw with a smaller brush size, you'll get a square with pointy corners,
And if you draw with a larger brush size, you'll get a square with rounded corners!
Let’s add a pattern to the pedestal.
Select your favorite material from the Material Tool.
This time I chose from Geometry Patterns (Color)!
Adjust the position and size
Tap Clipping while the material layer is on top of the pedestal layer!
If you want to fine-tune it, tap here with the material layer selected.
I'm going to draw the background.
After adding a new layer, move it to the bottom.
Tap here and select Bucket.
Change Reference Layer to Current Layer via the gear icon.
Then you can fill it with any color you like!
It's easier to cut if the color helps to recognize the outline!
In the Pro Add-on version, you can change the background color here!
When the image is ready, tap here and select Save Image.
Tap OK to complete saving!
This time I printed it using the online printing service of a multi-function printer at a convenience store.
The method and price differ from convenience store to convenience store, so please check each one!
At the convenience store we used this time, the price was 30 yen per sheet of L-format photo paper!
Don't cut this part.
Let’s cut it.
It will look like this when you’re done cutting!
Don't forget to cut this part!
If you fold the part left uncut...
Completed!
Cute!
The size is like this!
These ones are made of a vertical L-format photo paper.
I made it about this big against the paper!
When using it vertically, you can create the taller ones!
The weight of the paper causes it to fall backwards.
I'll strengthen it with the left over from the cutting!
The method is simple!
First, make sure the support paper does not extend beyond the illustration!
Now we just need to adjust the position,
Bend it,
And fix it with a tape...
It’s done!
This will make it stand firm!
It can be folded even after strengthening!
This is the size of it!
It's super easy to make, and it's also super cute, so please give it a try!
Thank you for watching!

