I made a Violin at Home from Scratch during the lock-down: Full build with Commentary

Mekwok Studio
1 follower
5 Video Views·Nov 15, 2022
During the lockdown in 2020, I tried to make a series of videos to teach people how to make a violin
but then the environment around my workplace became very challenging for me to continue with that
so I had to change my approach to do it and this video is part of the result of the new approach
and today I'm going to briefly walk you through how to make a violin along with these footages
I use spruce here for the blocks because it is kind of universal. You can also use willow. I just
happen to have a lot of spruce after making a number of violins. We use high glue in violin
making and 60 degree which is 140 Fahrenheit is the best temperature for cooking the glue
Generally high glue take one hour to dry and 24 hours to be totally set so it would be best to
leave it untouched for 24 hours. After the glue is set, then we can first work on the seat belts
For educational purpose and the sake of accuracy, this is the first time I make a form with a CNC
machine and make templates with laser cut instead of doing it by hand and I want to specially say
thank you here to my friend Sing Chi Lau for helping to make this possible. Here I'm using
a file to make the curve smooth and check if it is square. The thing I'm using here is called a
graduation chopper. The space between the needle and the screw is one millimeter and everything
that is thicker than that will get scratched. Simply plane off the scratch marks and you will
have everything in one millimeter without using too much of your brain juice. Then scrape a little
to make the surface smooth and shiny. Then we're going to use the bending iron to bend the ribs
Take your time because you don't want to break it. Once it is in a good shape, glue them onto the
blocks. Refine the ribs a little then we are going to work on the upper bows and the lower bows
This is just like making the seat belts and actually it is kind of challenging to film
because it is already demanding to cut them into an ideal shape and on top of that I have to be
very mindful that nothing is blocking the camera such as my hands, the tool or any shadow and also
I have to make sure there is no noise from the outside world all at the same time and also there
is no second chance. A friendly reminder this is the most dangerous tool in the whole file making
process. Yes, it is a regular cutter. Refine the edge a little then let's work on the inside of the
ribs. If you don't know it yet, there are linings in a violin and I'm opening the lining channel
here for the linings to sit in. This is a lining. I use sprues for that. The material is just like
what I used for the blocks but working on it is like working on the ribs. You will have to plane
it, bend it and glue it. Well, these are just laundry claims and that's how we finish making the ribs
for now. The wood we use for the ribs and the back is called maple. The pattern you can see there
is called flame or figure that's why some people call it flame maple. This may be contrary to what
you have heard before but if the edges are both square enough, you don't have to clamp them.
After the glue is set, plane the surface flat then we can work on the outline of the back.
This line should be three millimeters from the ribs and I use a template to make sure it is.
I use this demon slayer coin here to get a good curve. Anything with a diameter around 30
will do. And remember to leave some room for the button on the back here because once you cut it
out, it is hard to put it back. Many of you including my sifu Michael Thornton asked me
about this thing I'm using here. It is actually just a bowl saw. It is a very primitive version
of what we are using nowadays. The handle is made with a quarter sawn bamboo and the saw blade is
held by a piece of crocodile at both ends. I use the big wraps to make the rough outline
and a smaller one for the corners. Don't be scared by them, they are just like files
but with higher attack points. After we have a rough outline, use a marking gauge to mark the
thickness of the edges then work on it. We will do a rough arching and trim the edges down as
closely to the line we just make as possible. And in case you think this is very nice to share
it, I've made some ASMR videos with all these rough thickening scenarios including the back
and the top. You can just click there to check it out. Make sure to slow down when you are close to
the line. And now since the edges are thinner, it will be easier for us to work on the outline
in details. So refine it as much as you can, then it's time for the purflings. Here I'm opening a
purfling channel for putting the purfling in. It's kind of similar to the lining channel, just way
longer. And be careful not to knock down anything besides the channel itself here, especially the
inside of the corners. Now let's work on the purfling. There are many kinds of wood you can
use for the purflings including maple. You can make your own or just buy some semi-finished purflings
and work on it. Bend them a little and put them into the purfling channel to see how it looks.
If you like it, then you can add glue to glue them up. And you will need a small mirror near to help
this. After that, mark a line between the edge and the purflings, then dig a scoop along the outline
just like making a moat. After we have the moat, let's work on the castle. I will first make sure
the height in the middle is right, then I'll develop the arching from there with finger planks.
I like using the finger planks very much. Using them is like really communicating with the wood.
They will help you to understand how wood frames work and learn how to work with what I call
the flow in the wood. And this is one of the most joyful part in the whole making process for me.
This thing is called a zirconic compass. We use it to draw contour lines to check if we are making
a good arching. If yes, you will be very happy. If no, it will be easy to see. Just fix it,
then you can still be happy. Then we're going to scrape the surface and make it smooth. That's how
people do it back then when there is no sandpaper. After that, we're going to work on the plate
thickness. I also make an ASMR video on this, feel free to check it out too. After some rough digging,
use finger planks for the detail works. And remember to check the thickness from time to time.
Then refine the edges and the corners. And that's how we finish making the back.
We use sprues for the top. The procedure for making the top is very similar to the back.
You can say it's easier because the wood is softer, so it's easier to cut. But you can also
say it's harder also because the wood is softer. It would be easier for you to knock things down,
especially when making the purflings. And yes, there is also an ASMR video for this.
We will stop before finalizing the thickness and turn back to work on the F-holes. The F-holes
is one of the places you can see how simplicity works on a violin, but more on that later.
I must confess I did use electric hand drill here for the sake of accuracy, also because
traditional hand drills are really hard to find and very very hard to use. Cutting the F-hole with
a knife here will also force you to learn to go with the flow in the wood, or you'll just break it.
And remember to add the wing tips onto the F-holes, so it is actually an F, not an, you know,
S. Then lastly, we're going to make the wing and the scoop here into a good shape.
Then turn it back and finalize the thickness. And this is what you will see if you put the
lines behind your thin enough plate. Fascinating, isn't it? Besides the linings, there is a bar
on the back of the bass part of the top that we call a bass bar, and we also use sprues for that.
All we have to do is to make the bar fit with the inside of the top. What I'm doing here is
called chalk fitting, you know, using the chalk as an indicator to see if it fits.
Then just glue it up. After the glue is set, refine the shape of the bar. And I think this
little block is kind of cute, but I have to cut it away. Then keep refining the bass bar.
After that, refine the edges and the corners just like what we did with the back.
And that's how we finish making the top. And now you should probably recognize it already.
Yes, it is maple. We also use it for the scroll. And here comes the bowl saw again. It is a bit
harder this time because the piece is thicker. I have to make sure I'm cutting straight all the
way down all the time and not cutting into the scroll. And that's how the scroll escape from
the wood. Here I am trying my best to make all the edges as 90 degrees as possible,
and it's kind of therapeutic. I will sometimes add water onto the scroll to make it easier to trim.
Now check if it is square, and the outcome should be something like this.
Then draw out the center line, and draft the shape of the scroll with a pencil
and a drawing compass. The plastic thing I'm using here is just a cutout from a file,
a plastic file, not the tool file. I'm using a drill press here instead of a hand drill
because accuracy is very very important here. And again, remember not to cut into the scroll.
And this really makes me think of sashimi, you know. Then just cut everything to line.
This is actually not as hard as it seems. Just slow down and do the right thing at the right
time. It is better to go slow than going fast and make irreversible mistakes. Then you'll
eventually get there. Now let's work on the top level of the Tower of the Babel.
And then the footing of the side of the scroll. Then refine the bevel. And now let's work on
the other side of the scroll. After that, we're going to work on the back box. A hand drill can
help remove the wood in the middle faster, but be careful not to drill through the scroll.
We will have to glue the fingerboard and the nuts on before finishing the back box,
so let's work on it now. And now we can finish the back box. And now let's work on the footing
on the back. And refine anything that needed to be refined. And that's how we finish making
the scroll. This step is kind of violent. Be careful you don't break the ribs. Then refine
the inside of the ribs, even though not many people will be able to see it. And that's the
spirit of a cavern. Now let's glue the ribs and the top together. And while waiting for the glue
to set, I will make the label. You can make any kind of label you like, just don't make it too
big. And glue it on before closing up the box. Here I am cleaning up the surface and make it
as smooth as I possibly can before furnishing, because all the tool marks will suddenly become
very obvious once you put the furnish on. Wipe the top with a wet towel, then you will see some
spikes standing up. Let it dry a bit and clean them up with a horse tail or just with a scraper.
Now let it enjoy the sunshine as long as possible, then we can put the furnish on. Here I am adding
alcohol-based color dye onto the violin. Make sure the whole body gets it. And it is better to apply
a few thin coats than one thick coat. The color will look smoother that way. And now let's add
shellac as the ground coat. The reason why I furnish the body now before joining the scroll
is because I don't want to knock off the fingerboard later for furnishing, and also it can
protect the body when I'm joining the scroll. Now let's refine the neck and open the space on the
body for the neck to fit in. This is the most intense part of the whole making process because
the angle of the neck is very important. And it's so intense that I almost forgot to take this shot.
Now let's glue them up and wait for another 24 hours. After that we can finalize the neck.
I will first establish the thickness near both ends as a waypoint. I exaggerate a little here
so you can see clearly where to cut. Then join everything in between together and use files to
make it as smooth as possible. Then refine everything, sand it with sandpapers, and check if it is smooth
and balanced. You will actually know better here if you know how to play the violin. And if you're
satisfied with the neck, let's finish making the button. Then also furnish the neck and the scroll.
And now I'm adding oil varnish onto the violin. If you look closely enough, you will find the
texture is different from the varnish I used before this. And just let it dry for a long long time.
Here I'm applying linseed oil onto the neck. Work on the nut and open the space for the saddle.
Prepare the saddle and glue it on. Then refine the shape of it and be very careful not to scratch
the varnish. And that is the reason why I put some masking tape on there. Here I'm opening the hole
for the end button and also for the pegs. Then prepare the pegs, lube it and make them fit with
the holes. Then prepare the sound poles and put it into the violin. And then the bridge. I will first
plane the bottom area thinner and make it fit with the arching of the violin. Look at this tiny pencil.
Then work on the top, refine the curve and put the name on. And lastly the tailpiece and the
chin rest. And that's how we finish making the violin. Oh and one last thing, always remember
to put a cloth here or you will turn out to be like me, scratch your violin, wanted to fix it
and set out to go make one. So I'll see you around next time. It is gonna be a detailed tutorial on
how to make this very same violin at home in which I'll cover all the tools, woods and accessories
that you need to buy. We will also take a deep dive into the templates and form and I'll take
you to my workshop and try my best to explain all the steps and techniques that I use as well as
some tips and tricks for first time build. The tutorial is aimed at absolute beginners so don't
worry if you don't know anything about woodworking or think yourself as an executioner of artwork.
I was at the same place not very long ago. Alright amigos, I'll see you next time. Comment
below if you have any questions. Remember to like and subscribe and get ready to see my puck
dropping the scroll again.
