I made a tiny fireplace (that works!)

Ceramic Art Studio
35 followers
9 Video Views·Apr 11, 2026
This video is sponsored by Squarespace.
I've been following the artist Kay Schrader for a while,
but when I saw this reel, I knew I was going to have to try to remake it.
So in this week's Steal Like An Artist video,
I'm going to attempt to make a mid-century fireplace incense burner.
Let's do it!
Okay, so I prepped the clay yesterday.
I decided to go with the same clay that I used for the cardboard pieces,
partially because I just wanted to use it up,
but I also thought this would be a really beautiful brick color.
I did contemplate using this red color that I have.
Actually, it looks very similar to how the clay looks now,
but it fires like this.
This clay fires like this.
I feel like it's too dark,
and I also feel like the contrast against the white mortar is going to be too strong.
So I thought I would go for this more sandy look,
and I'm going to combine it with this matte black glaze for the mantle.
And then instead of using white underglazes like Kay Schrader does,
because this white is very, very white,
I wanted to attempt to use slip from just my white clay
because it's a little bit grayer, a little bit more off-white,
and I feel like it's going to make a nicer combination.
I don't know how it's going to work, but we're going to try it.
That's the idea.
Yesterday, I rolled out seven millimeter slabs of this clay.
I think the key to getting all these right angles
is that the clay is going to be quite stiff,
but not too stiff that the seams don't fix.
So this is all the clay that I had,
and what I had left over, I dried out and I made into a slip.
This is just like making reclaim, guys.
Like, I just dried out the clay and then added a little bit of water,
and I was really conscious of how much water I was adding
because I wanted this really nice, thick, gloopy stuff
instead of like a wet slip.
I hope that this is enough clay to make this piece
because I actually don't have any more of this clay,
so fingers crossed.
I bought this brick stencil from an Etsy shop.
Apparently, it's Mylar.
I know that Kay Schrader cuts her own brick with a Cricut cutter,
which I don't have access to,
so I'm really happy that I found the shop that sells these online,
and we're going to use this to apply a brick texture to my slabs.
I need to double check how she did it exactly.
Did she score it or...
Okay, so she just lays the stencil down,
rolls it in, score through the stencil,
cut off the excess, and then apply the slip.
What I think I'm actually going to do,
because I'm nervous about running out of clay,
is I'm going to pre-cut these
because if I just use this whole slab like this,
that's less clay with the texture
than if I do this and this, I think?
And hopefully, then, we have enough clay.
And if not, we have to change the design,
but I really want to do this three-tiered one
that I saw on her Instagram, so we're gonna attempt.
I have no idea how much to add.
I wonder if I need to dry this
because it's making a lot more peaks than hers did.
I'm gonna quickly use my heat gun.
Okay, should we try and lift it?
Scared.
Oh my god.
That is amazing.
That totally works.
Oh my gosh.
I think some of the depth of the slip
is going to shrink a little bit
simply because there's a lot of water in it,
so it's probably going to dry out
and get a little bit flatter,
but it looks great.
Wow, I'm very impressed.
Let's do another one.
I just realized I can't actually use all of these
because I need some not-printed slabs for the mantle.
Oh, I should be more strategic
about which slabs I'm using, then.
This can be a mantle.
I should use the longer ones.
Okay, I'm gonna roll this one,
but I need two for the mantle.
The slabs are a little bit drier
than I would want them to.
At least this one is.
Let's see.
Any extra of the slip I can actually just dry out.
If I need any extra clay, I could use that.
I tried to dry it out
because I feel like this works better when it's dry,
but I only have one of these.
Gorgeous.
I'm not gonna waste any of the slip.
Let's take a little break to talk about today's sponsor.
You know them, you love them, Squarespace.
If you've never heard about Squarespace before,
they are an all-in-one platform
that artists and entrepreneurs use to stand out online.
I've personally been using Squarespace
ever since I started my online shop,
and I'm still using them for my website today.
There are a few things I love about Squarespace,
one of which is their memberships,
which I use to host our very own template club
that you can use to create community, host courses,
and other premium content.
Two, they just launched a really cool AI feature
called Design Intelligence
that empowers anyone to build beautiful bespoke websites
tailored to your unique needs.
And three, once you have your online store set up,
you now have access to Squarespace Payments,
which is super easy to set up
and gives your customers more ways to pay
with popular payment methods like Klarna,
Direct Debit, Apple Pay, Afterpay, and ClearPay.
So if you're looking to take selling your pottery
to the next level,
or you're just looking for an online home for your art,
I really recommend Squarespace
because they make creating a beautiful website really easy.
So head to squarespace.com right now for a free trial.
And when you're ready to launch,
go to squarespace.com slash pottery to the people
for 10% off your very first website or domain.
Now let's get back to the video.
Okay, it's not perfectly even.
There are some parts where I applied the slip
a little bit more thickly,
so the bricks stand out more than others.
But this is not my concern.
My concern right now is that they're going to dry unevenly
because I just took some fairly dry slabs
and I just applied water to one side,
which means the clay is going to want to like pull up.
So what I'm thinking is I need to dry these again
under weights,
but I don't want to squish the pattern right now.
So I think what I need to do
is let these dry out for a couple hours,
and then maybe I come back down here later
and put them under weights.
Still feels a bit tacky right now.
It's drying actually pretty fast though
because the slab itself is pulling water out of the slip.
So I set aside a couple extra pieces.
This is going to be the pieces for the mantle
that I don't want the pattern on.
Hoping I have enough.
I don't know.
I'm kind of regretting using the leftover clay now
because I am worried that I'm going to run out.
I did sort of strategically set aside
what I think is going to be the right amount.
And I strategically applied the pattern
to what I think is going to be the right amount,
but I've never done this before.
So I don't actually know.
And then I think something that might help
is I have a good amount of extra slip.
So I'm going to dry that out.
It's not going to be a ton more clay,
but it is going to be hopefully enough
to add some coils to the seams
and potentially roll in another slab
if I'm just missing a little bit of clay.
So I'm putting what's left on a plaster bat.
The plaster bat is going to soak out the extra water
and then it's going to be normal clay again.
So I can make it into slab.
I can use it on the seams.
I think I'm going to need to apply coils to seams.
So I'll definitely need some extra clay for that.
Okay, see you tomorrow.
I need to show you the absolute state
that my studio is in.
It is pure and utter chaos in here.
I've been painting behind the shelves
and the magic of framing
because this all looks normal, right?
I'm working on updating the studio a little bit,
but today we are simultaneously
going to work on our incense fireplace.
So I ended up not putting these under pressure
just because I was really worried
that it was going to squish the brick texture.
It is pulling up a little bit at the edges,
but not as much as I feared.
So I'm just going to assemble it now
and hopefully the structure of the assembly
is going to keep it all not warping.
This is the plan.
And here's my extra step
that I'm slowly turning back into clay.
It's clay again.
So we've got a little bit extra to work with.
A little overwhelmed.
Once again, I find myself doing a precise project.
Why do I always do this to myself?
I'm going to save these pieces.
Okay, so I need to reuse them.
Okay, so this is the longest side.
I'm scaling this whole thing based on how much clay I have.
This also means I can't make any mistakes,
which is kind of terrifying.
We have two sides.
Okay, I'm just trying to figure out the proportions right now
because, yeah, I want to make as much use of this as I can.
One, two, three, four, five, six, seven.
Interesting.
These bricks are not all the same size.
Okay, that's fine.
You can work with that.
Okay, I think I'm just going to start assembling
the bottom tier
because I think that's going to determine
the proportions for the rest of them.
So we just start assembling,
then I can figure it out as I go, I guess.
Assembling this should be pretty easy.
This tool is really helpful.
I'm just cutting everything at a 45 degree angle,
slipping and scoring,
and putting it together as precisely as I possibly can.
If you've ever used my Tea Lighthouse template,
it's basically the exact same thing.
So I'm going to go ahead and cut everything at a 45 degree angle.
You don't need this tool,
but it is really helpful for cutting things at perfect 45 degree angles.
And then I might also put a coil to reinforce it,
but I'm not sure yet.
Just depends how it's looking.
This clay is getting fairly hard.
Hopefully it's still wet enough to actually stick.
Definitely need to use water or slip.
I'm going to put a good amount of water on here
to really make a lot of slip.
Trying to be really delicate with it so I don't smudge the pattern.
One piece done.
I mean, not done.
The very beginnings are done.
I'm lucky on some of these corners where the bricks line up perfectly,
and then these bricks are not all the same size,
so some of the corners don't line up.
Some of these same height pieces have six bricks,
and some of them have five.
No one's going to notice, honestly.
I'm definitely going to add some coils to reinforce,
but I also would like to make sure that I have enough of the mantle piece bits.
I'm going to roll out some more clay for this one, for the mantle.
This gets set aside for now.
Okay, okay, okay, okay.
Tier number two.
This is going to be the part where the actual fireplace lives.
I'm going to let this chill for a second so it can all homogenize.
So my individual pieces are all assembled.
I still need to make the top for this one, the mantle,
but I didn't have enough clay,
so I'm going to roll that out now with the clay that we recovered from the extra slip.
Hopefully there's enough there.
I am going to trim these mantle pieces back,
but I'm thinking Cage Raider trimmed them right up to the pot,
but I'm thinking I'm going to leave them overhanging a little.
I think that might look cute, but let's see.
Going a little rogue here.
So I think the name of the game for this project is really
doing things at the right moment and taking your time.
I don't want to push it,
because that's when things can start to get stressful.
So I'm going to let this chill overnight.
Right before I leave, I'm going to roll out another slab for this,
and then I'll see you tomorrow.
I'm going to do something crazy.
It's not perfect, but is it ever?
And it's nothing that a knight trying under pressure will not solve.
Good morning.
It's actually two days later,
because I had to reclaim all the clay that I had collected in here.
I went ahead, dried it out, rehydrated it,
and now it should be pretty much ready to reclaim back into clay.
So I can use this going forward.
Otherwise, I was completely out of clay.
Let me just wedge this up real quick.
So I wrapped this up really good.
So hopefully, hopefully it's fine.
I also spritzed it with a spray bottle.
Need to add the mantle,
and then we can finally assemble them, which is very exciting.
So the slab that I rolled out last time I was working on this
has been drying out between boards, and it's pretty stiff now.
This is what we want, just like with the others.
I'm going to attach it.
OK, and then for these guys,
I'm going to add a coil now to the inside just to reinforce them a little bit,
and I'm just going to add very thin coils along each of these seams to reinforce it.
Something like this.
Help it stick by putting a little bit of water in the seam.
Just use my finger to sort of round it out and press it in.
I'm going to go ahead and start trimming these mantles,
and I'm just going to use a piece of wood as a spacer so I can make them nice and even.
What do we think for a chimney?
Just cut a little hole in the top once they're all assembled.
I think that's freaking cute and definitely convincing, at least to me.
You can't even tell that this was pieced together for random reclaim.
Looks perfect.
How cool.
I'm pretty pleased with that.
So let's see.
I need to cut out windows here, the top here, and also this guy here.
I want to cut this after it's attached because I'm worried I'm going to distort it because I'm
cutting out a lot of clay.
So I think what I'm going to do is I'm going to cut the lid off first.
I'm going to cut this guy and then I'll cut on that line.
I'm really so happy with it.
It looks freaking cool.
OK, I'm going to let it dry.
In the meantime, let's work on the accessories.
So imagine little pieces of wood.
So cool.
So the first thing I'm thinking is to make a little pot to hold a plant that will sit on
the mantle.
And the good thing is that I now have a miniature potter's wheel that I can use to make a little
pot.
This is from Weber, by the way.
I'll link this wheel down below in the video description.
The scary part is making the little plant parts that stick out, but we can start with
this.
If you want to see the video where I reviewed this wheel, I'll link it somewhere up here.
OK, so now I need to make the plants that stick inside this guy.
I'm going to use nichrome wire to get them to stand up and then I'm just going to sculpt
them with white clay.
Believe it or not, that worked.
And the last thing we need to make is the little holder for these guys.
This steal like an artist series is purely for entertainment and education.
I'm not trying to steal Kate Schrader's work.
In fact, this is more of an homage to what she does.
All the props go to her for coming up with these designs.
She's an amazing artist.
Go check her out.
I'll have her website where you can buy her work and her Instagram link down below in
the video description.
I'm not going to be selling these pieces because I don't want to profit off of someone else's
ideas.
But if you're interested in buying something like this, definitely go check out Kate because
she does a way better job anyway.
OK, so I've supported it because it's not super stable.
I've supported it with a sponge and some sticks.
Tomorrow I'm going to come back in and probably refine this piece a little bit.
I'm definitely going to refine the leaves and paint them with some green underglaze.
And then when it comes to my fireplace, I'm just going to slow dry it over the next couple
of days.
Then we get to do some fun glazing.
So I will see you then.
I'm quite nervous to open this bisque because all these different pieces that are fitting
together and if anything is off just slightly and there's any little bit of tension between
these pieces that are fitting together, you get a crack.
So I definitely need my gloves.
It is looking surprisingly good.
It's not even a crack on the inside.
I'm impressed.
I think using thicker clay was a huge, huge benefit here.
So my plan is to apply the grout lines or I guess the cement lines.
I want to make them lighter.
What Kate Schrader did is she just uses underglaze for this.
So she applies the underglaze and then she wipes it back, right?
I do have white underglaze.
That's going to be my backup plan.
But what I want to try first is just some slip that I made from a white clay.
So this is a clay that fires at the exact same temperature as this clay.
So I'm hoping that they play nice together.
So I really want to try this.
I have no idea if it's going to work.
It's going to be a little bit of a risk.
And I'm also kind of worried like if I just apply it all completely to this and then wipe
it back, is it not going to get stuck in all of the little bumps of the brick as well?
Like I don't want that.
I just want it to be existing in the, I want to call it grout lines, but I think it's cement
or something.
So I'm going to try on the back first and we see, we see, we see how it looks in just
a little spot.
See, this is what I'm worried about.
Do you see how it's getting in all the little holes?
This is not what I want.
If I was clever, I would have made a sample, but I did not.
OK, plan B is to use this little guy.
I'm not very practiced at this, but the idea is to then apply it inside all the little
lines.
This is going to be way more tedious.
Maybe I should have sifted my slip as well.
It's my first time filming in the new year and I simply cannot be bothered.
I feel like this is too thick.
This hole is way too small.
That's better.
That's what we're talking about.
OK, OK.
See, that's what I'm talking about right now.
Just adding a bit more water, maybe that will help.
It's a lot of effort for something that I don't know if it's going to turn out at all.
Oh, this is a nightmare.
Should we sieve it?
OK, it's not obvious why I'm sieving.
It's because like the reason this keeps clogging is because there's larger pieces in this clay
and they're getting stuck and then, you know, they explode through.
So typically when you're doing slip work, you sieve.
Yeah, the next thing I want to do is paint glaze on these mantle pieces.
The issue, though, is that I pretty much only work with dipping glazes like I don't often
use paint on glazes and there's no way to dip just the mantle pieces, right?
So I actually use this stuff that theoretically is supposed to make
dippable glazes paint on glazes.
I've never actually used this before, and I don't know how well it's going to work out.
So I just sprinkled some into my matte black glaze and we see how it works.
It made my glaze kind of lumpy.
I don't know.
I don't know how to feel about that.
I guess that works.
Certainly, it totally works.
OK, I'm quite pleased with that, although I have no idea how it's actually going to look.
We shall see.
The last thing I need to do is all of the accessories.
These guys need to somehow go in here and also like not fall over.
So I'm just going to mess with it.
I feel like there should be a medium in here that I stick them to.
But like what?
Maybe a bunch of little beads or something.
You know what I could do?
I could just fire these in my little kiln stilts because what I'm doing right now is
I'm just rubbing off all the glaze as I'm trying to work with them.
I could fire these like in the kiln stilts like so, assuming they don't fall over
and then just like glue them in or or even better.
I'll like put some sand or something in the bottom of the pot and stick them in that way.
That makes way more sense to me than trying to do what I'm doing right now.
OK, let's do that.
I'm so scared it's going to be all cracked now.
I cannot believe how freaking cool this looks.
This turned out way better than I even expected.
This like first of all, I'm technically I'm really fascinated and relieved that these
parts stuck together.
I thought with so many right angles sticking together, something surely would not shrink
correct.
And especially with the addition of slip, just things getting wet again.
I cannot believe it.
But this thing is this is solid.
This is like I can't even I don't see a crack.
Oh, there's a little bit of a crack here.
I take that back.
There's a little bit of a but barely.
I mean, it's solid.
There is some cracking in the slip, which I actually think makes it look more like cement.
And also, you know how frustrated I was with trying to get the extra slip off the bricks
themselves.
It sort of looks like a whitewashed brick, like bricks do sometimes look like this.
Am I am I wrong?
I think they do.
And my accessories also survived.
I managed to glaze glue this little guy back together.
I cannot believe it.
He's there's a little the tiniest of wiggles, but it's fine.
This looks freaking cool.
I love it.
And then my leaves look pretty, pretty good.
Like one of them cracks a little bit, but it's fine because I made extras.
I was trying to think how I was going to stick these in and I was thinking like a sand or
something would be cool.
But I actually have all this way too thick, really old chamat that I haven't used.
Like I just haven't used it and I don't think I'm going to use it.
So I think I can just use this instead of like a sand.
And I'm just going to fill it in here and hopefully it's enough to build our plant.
I don't know if you can see on camera.
There is smoke coming out of the top here.
It's working.
I mean, this is so freaking cool.
This is definitely one that I'm going to be keeping because I love it so much and I don't
really burn incense, but I'm definitely going to keep it as a cool sculptural object.
Thank you guys so much for watching.
Thank you especially to Kate Schrader for inspiring us so much with your incredible
work.
I'm going to be leaving links to her website and her Instagram down below in the video
description.
Go check her out, buy her stuff.
She's awesome.
That's it for me today.
I'll see you guys in the next one.
Bye friends.
