I made a noble rat knight riding a majestic pigeon steed

The Art of Sculpting
60 followers
Materials -- Full disclosure: I'm an Amazon affiliate, so any of the links you follow here will help support the channel. It doesn't cost you anything, but I get a little kickback for each purchase made through these links (I like to think of it as taking money right out of Jeff Bezos's pock
#art #sculptor #sculpture #artprocess #artwork #amazing
AI Generated·May contain errors
Video Summary
AI GeneratedAdam crafts a detailed miniature of Sir Reginald, a noble rat knight, riding a pigeon named Steven. The process spans from building aluminum foil armatures and sculpting intricate clay textures to advanced painting techniques, transforming raw materials into a high-society fantasy duo.
Comments are disabled for this video.
Hiya folks, my name is Adam and I like to make tiny nerdy things.
And just the other day I was talking
to my non-platonic roommate who was lamenting the
fact that we didn't have any fine art kicking around the house.
Now, after I picked my jaw up off the floor
and processed what I think we can all agree
is an absolutely earth-shattering statement
to make given what I do for a living, I decided
maybe it's time to make something
that we can all objectively agree is true high society
art.
So naturally I decided to make
a noble rat knight riding his majestic pigeon steed.
To that end I've made an aluminium foiled bird body
so that I can jam a straight edged
hoop up its backside upon
which I will add the rear tail feather plumage later.
Now, most people are unaware that pigeons are comprised of nearly 85%
aluminium foil in real life as well,
which is why you rarely see rusty pigeons in the wild.
Otherwise, once I've got my rust-proof, oven-ready pigeon body built,
I can start slapping on a layer of clay until I've got
the entirety of the shiny metal body
completely covered in dull, lifeless grey clay.
Then a quick smoothing will blend those lumpy clay bits together
and I can move up to the head
where I'll smoosh a candy cone shaped clay cone onto
the front of the face to create the beginning
of the beak slightly reshaping it to match
a more pigeon appropriate shape. Then a couple eyeballs
fit into the eye sockets
and pressed closed followed by a bit more of the reshaping to
Hoping to give my pigeon face a bit more pigeon character.
This, of course, takes my ignoble pigeon
to the heights of high society, thereby forcing
upon this mighty bird an equally high society name,
therefore he shall henceforth be known
as Steven.
Naturally, with this flawless facial structure built,
it's time to add his majestic flowing
pigeon feathers by adding lots
of little fur-like feather texturing just up to the very edge
the edge of his beaked cranial portion.
I'll then flip Steven over
so I can reshape his underside to give him a bit more of a
pigeon-appropriate pair of legs and thick pigeon thighs,
followed by the beginning of
what will become one of my new favorite methods for infeathering fowl.
Now, of course I realize
that pigeons aren't technically fowl,
but in this instance I opted for a literary absolution
Over scientific accuracy.
Regardless, before I can get on to the fancy and feathering,
I need to add Steven's tail feathers, which will
be some simple squished flat cause clay sausages layered onto the top
and bottom of the otherwise unclayed tail armature.
With a bit of texturing though,
we're done with that and on to the feathering.
I'll start with the bottom of the body, pressing a little coin
of clay onto the furthest most exposed pigeon skin before swiping it up
in a way to create a single lovely little feather.
Then I'll repeat this process ad infinitum until I've got
the entirety of the formerly
unfeathered body fully covered in little clay smooshed balls.
I'll leave the neck exposed
for even finer feathers later,
but for now a quick brushing with isopropyl alcohol will impart
a bit of feathery texture on top.
With big feathers finished though, I can move on to
adding the finer feathers of Steven's neck
which are simply little balls of clay rolled into points
...points and press together,
working their way up towards the top of the head.
As I was adding the fine feathers
though I realized that Stephen's neck isn't nearly
thick enough so I'll take a minute to increase
its girthiness to much more adequate proportions
before getting back to adding more
and more of those teeny tiny feathers.
Eventually I've worked my way up to the top of Stephen's head
so I'll gently roll a sculpting
tool down the feathers to blend them together
a bit more before adding that previously established
alcohol brush texture on top.
And that's Steven's feathers fully finished
which means it's time to start adding some armor.
I'll start by taking a sheet of clay
and cutting an armor shaped shape out so that I can press it
into Steven's chest followed by a similarly sized piece
of clay that I can fit onto his back.
These will become the two leather straps that hold his chest plate
and the saddle tight to his body
so I've built some anchor points out of clay and fine armature wire.
To connect these points,
I've cut some thin strips of clay to run between the anchors,
looping them back on themselves and adding little metal clasps,
before adding a bit of seam detailing to the leather harness.
With the harness in place though,
I can get to work planning out Stephen's wings,
which start as a sheet of armature wire marked, then cut down to size,
so that I can create two equally sized thin clay wings.
The wire sheet will provide just enough support
so that the clay will keep its shape while
still being malleable enough that I can easily reshape
the wings once they're in place.
So with that in mind I'll cover the exposed sheet
with a thin layer of clay then press
both of the wings onto Steven's body
and bake it so I have a nice solid surface to
Just to start adding the necessary wing textures on top of.
Unfortunately, I realized the thin clay straps were too brittle
and kept breaking, so I just ended up chopping them all off
and replacing them with metal straps instead.
I literally just bought myself some thin flat lengths
of armature wire which ended up being
the perfect substitute for clay straps since they're just about
the same thickness and width
but they're made out of metal
which means they're not likely to break while I'm working. Otherwise
it's back to the wings where I'll build up the layers
of clay to cover the thin cos clay beneath
with a thicker layer of super scopy
so that I can carve the initial layers of feathers on top.
Then with that first layer of feathers
in place I'll bake the wing again before adding another
layer of feathers on top of that followed
by a third bake adding more of those little ball
feathers on top to finish the wing off.
I'll do something similar to the underside but only add
the feathers to the part of the wing that will
be visible before adding some big chunks of clay
to the attachment points
so that I can squish the wings onto Stephen's body for a bake.
Once it's out of the oven and cooled down,
I can peel the wings off which will leave a
nice impression of the feathers beneath.
However, to make reattaching them later easier,
I'll remove a small square section of Steven's body,
then I can then line up perfectly with
the impression left in the wing,
gluing it in place, thereby creating a perfectly
keyed attachment point to make lining up my wing a quick
and easy process later.
All that's left to do then is add a bit
of texture to the wing via a whole bunch of
stabbing with a scalpel and that's the wings finished
which means I can add the remainder
of Steven's accoutrement.
I started by making a triple strap that goes from the belly plate
under the body and around the legs to anchor the top
and bottom pieces together a bit more firmly,
holding it all in place with copious amounts of super thin super glue,
then I built out the leathery bits of the harness
with clay until everything was connected.
To make the reins I took a long length
of the smallest gauge flat wire I had and looped it up
and over Stephen's beak. However
the super glue wasn't strong enough to hold it in place so I
figured I could drill a teeny tiny hole and pin it.
However I ended up instead snapping the drill
bit off which actually kind of worked out fine.
Then it was just a case of bending the wire up
and around Stephen's neck
so that the straps hung in a semi-realistic manner.
To connect the two ends together I took a bit
of heat shrink tubing and fit the ends into it,
blasting it with my heat gun to shrink it
and create a comfortable silicone handle
that our future rat knight can hold on to.
Then I just started adding little lengths of
wire in and around the reins
and the beak to make it look a bit more functional.
All that's left to do then is add the armor to the chest piece
and the saddle on the back.
For the chest plate I'll slap a sheet of clay on top
and cut it to size before adding a bit
of thickness to the center
so that I can create a nice curved shape on top.
And for the saddle I made the saddle off camera
because I forgot to press record.
Also ignore the little bit of frill around the bottom of the saddle,
I ended up breaking that off and I couldn't be bothered remaking it.
Otherwise, with a little rolled sleeping bag attached to the back
of the saddle, that's this mighty steed all but finished,
which means it's time to make my noble knight, Reginald the Rat.
Now, much like his mighty mount, Reginald starts as an oblong ball of
foil wrapped in a layer of clay with a candy cone-shaped cone on top.
However, instead of following that with the great enfeathering,
I'll fatten up his hunchback and thicken up
his belly before adding some thick rat thighs to the sides.
Once I've blended all of this into the body I'll poke some holes
into the bottoms of the legs for
feet that I'll add much later in the process,
instead moving up now to the face so that I
can poke some eye sockets into the sides of his head
which are then filled with subsequent eyeballs.
I can then build up the surrounding eyeball area
and add a little rat nose to the tip of the cone
shaped dome, carving out the mouth
and cleaning up the upper lip zone as well as doing some
Some initial in thickening of the cheeks.
Otherwise, once I've pressed some breathing holes into the tip
of his nose, it's time to start building out Sir Reggie's armor,
which will start as a wide strap of clay wrapped around his head,
smoothed back, and cleaned up before adding a thinner strip
on top to create the body of this knightly helm.
The visor I've made by cutting some flat wire to size and bending it
into a visor-shaped shape, which I can leave free-floating for now,
while I cut some ear holes for future ears poking out.
Then it's on to making his body armor
by wrapping another length of clay around his girthy gut,
combining several pieces together to create a uniformly smooth,
sharp-edged piece of plate
mail before sanding it all down to give me a nice smooth flat surface.
I then added a few more
layers of extra thin clay on top to make
his knightly armor a bit more interesting as well
as creating a slotted piece of clay that fits neatly
on top of the metallic portion of his visor
To try and make it look a bit more like an actual visor
and not just a piece of metal that completely blocks his view.
To make his arms, I'll drill some little holes into the side
of the armor and fit some teeny tiny lengths of wire in,
including the right arm,
which is attached to a little length of pre-cut metal straw.
Then I'll take a little lump of clay
and smoosh it flat before cutting a set of little fingers
into the tip, pinching and pulling into little pointy rat fingers,
adding a thumb to the side
before adding it to Reggie's outstretched arm,
covering the wire in a thin layer of clay
before bending it into its final position and bulking it out.
Now the other arm includes a little metal tube
which will be the handle for an eventual lance,
so I'll cover the tube in a thin layer of clay
then build Reggie's hand directly on top of the
tube. Before I build out the rest of the arm though,
I want to mount Reggie on Steven's saddle
so that I can figure out the proper position for the lance.
After a bit of back and forth
and test positioning, I decided to have the lance pointed straight
upwards with the butt of the lance resting just
to the right of Reggie's foot.
With that figured out, I can build up the rest of Reggie's arm
and get to work adding his feet,
which start as little lengths of wire hammered flat,
which then can be pushed into his little
leg holes and bent into the proper position.
I'll cover these in a layer of clay and add
some toes to the tips, then it's back
to Steven's back to properly position those
toes before adding a long, scaly,
textured rat tail to the back of Reggie's... uh...
Then I can add some ears to the pre-cut ear holes in Reggie's helmet,
and it's all into the oven to lock it all in place.
Once he's cooled down,
I can free Reggie from his mount and get to work building up his fur.
Originally I'd planned on adding a thin layer of fur to Reggie's body
while the clay was soft
and before adding any of the armor,
but then I totally forgot I was gonna do that and I ended
up with a smooth naked hairless rat,
so I guess I'm gonna have to just add a whole bunch of thick
fur on top instead. That's actually fine
though since I think the waterlogged wet
sewer rat look fits the noble knight
aesthetic we're going for a bit better.
Fortunately it's easy enough to fill the gaps
in the armor with a mess of clay and poke some
furry texture into the top
and that's noble Sir Reginald looking appropriately shaggy.
To make his lance then I made a little dome
with a hole in the center that I can fit down towards
the handle which will give me a nice solid surface
to start sculpting the lance on top of.
I'll then cover the remainder of the metal rod
in a progressively thinner layer of clay to create
a lance-like shape. However,
I also wanted his lance to be a bit fancy, so I'll try and smoosh
the clay into a swirly final design before adding
a little ring around the bottom. Otherwise,
all that's left to do is make Reggie's two front teeth
which I opted to make out of more of that
flat metal wire, sanding and bending
and snipping it to size before gluing it in place.
Finally I'll fill out the flesh where
his whiskers will go with a last bit of clay
so that I can poke some teeny tiny bits
of wire in place and that's Reggie
finally finished and ready for a coat of paint.
However, before I can do any of that
I need to make Stephen's feet
which up until now I kind of forgot I hadn't made yet.
To that end I built a simple perch out of dowel
and some plywood so that I can fit Stephen's
stubs into it, then it's just a case of adding a set of three toes
and a back claw to each of his
legs, sculpting directly onto the wood before adding
a bit of scaly bird texture on top and
jamming a talon into each tip
and that is finally this fine rodent-pigeon combo, fully sculpted
And ready for some color.
I'll start the undercoloring process
by completely covering everything in a thick layer of black
primer.
I'll then follow this up with a lighter zenithal dusting
with a white primer trying to blast it from one direction
to leave the black in the recesses as well
as leaving Stephen's neck untouched since I need it to be black
to maximize the effectiveness of these color shifting paints
which will make his beautiful pigeon neck adequately iridescent.
I'll blast some of the purply toned shifting paints around the base
of his neck before spraying the greenish blue tint along the top.
Pretty wild and it doesn't show up on camera nearly as well as it does
in person, but you can kind of see how perfect it is for a pigeon.
I'll then work my way around Stephen's body
with a bluish-gray laying some foundation colors before blasting
his head and tail feathers with a darker bluish-gray
and the wings with some strategically placed black on the tips
and towards the ends of the wings.
A bit of white dry brushed along the edges
of the feathers will add a bit of highlighting and help
them stand out against one another.
Then I can paint the lumpy bit of his nose white before
painting his feet with an extra opaque reddish orange.
Once that's had a chance to dry completely
I'll come back with a thick coat of white mixed
with retarder to prevent it from drying too quickly
so I can wipe the majority of it away leaving me
with a washed out reddish orange pigeon foot.
Then the talons get a solid black
with a bit of dark grey highlighting,
and I can do the same thing to the tip of his beak.
Then it's time to start base coating all of the straps
and leathery bits with a dark brown,
working my way around the body making sure to get each
and every strap with that same dark brown,
before giving the larger sections a slightly lighter brown
to help them stand out a bit more.
Then to make all my leathery bits look worn and weathered,
I'll sponge a lighter brown over top of everything before coming back
with an even lighter khaki to add copious amounts
of wonky haphazard weathering.
Some final streaks and cuts with a brush will finish it off
and I can paint my bedroll with
a sandy beige and paint the last two straps
that I forgot were there as well. Finally to tie all
those leathery colors together I'll give everything
a couple coats of a very watery brown glaze.
And to make the saddle and chest piece stand out,
they each get a coppery brown wash on top.
I'll then paint the chest piece with a solid metallic tone
and work my way around the straps
and buckles, painting all the metal bits
with that same metallic before coming back to the
chest and washing it with a sepia wash,
dabbing away the excess and dry brushing
some silver over top to add some streaks
and highlights and sharpen the edges.
The pigeon perch I'll paint brown
and the base I'll paint black with the ring at the bottom
getting a shiny metal top coat
then it's on to painting Stephen's eyes with a black base coat
followed by a messy yellow mixed with a messy orange
and a messy black iris in the center.
A little dab of UV resin will bring them to life, and that's one half
of this majestic duo done, so it's on to Sir Reginald.
He'll get a blasting of dark brown to set the undertone of his fur,
followed by a couple blasts of progressively lighter browns,
before an airbrushed glaze of coppery brown over top will bring some
of that warmth back into it.
Then I can start drybrushing lighter and lighter browns on top,
against the grain, to add lots of tonal variation
while highlighting all the furry bits of his body.
I can then paint the insides of both of his ears
with a yellowy flesh tone as well as his nose,
hands, feet and tail before haphazardly
slapping some lighter pink on top
followed by a wash with red while his tail gets a messy brown mixed in.
Same as with Stephen,
I'll base coat all of the armor
with that same metallic steel however Reggie's armor
is going to get a black ink wash to make it look
a little bit more like weathered worn iron.
While that's drying, I'll paint his eyes,
the lance handle, and his whiskers pitch black,
then give his teeth a nice yellowy once-over.
At this point I decided the armor was a bit dull for a noble knight
so I'll use a sponge to add a
bit of yellow to some strategically selected
panels before using some super thin strips of
masking tape to cover the yellow so that I can dab on a vibrant red.
Then with the red in place
and a bit of cleanup on any overspill I can peel away
the tape to reveal the fancy yellow and red
Red striping of the armor.
Finally, a last bit of UV resin over Reggie's eyes, and it's time
to start assembling this noble knight and his majestic steed.
Oh yeah, I painted the lance red and sponged some browns over top so
that it looks like the paint's chipped away to reveal the wood beneath.
This fits neatly into the handle in Reggie's hand, and the wings
fit neatly into their respective slots on Stephen's body, and...
Well, that's us done here, and on to the glamour shots.
As always, a massive thank you to the fine folk over
on Patreon, and a special hey how
are you to the newest of them, Not Really Magical,
Jalen, Mystarry Moribund, Coppertop
Creep, I Dinky I Dinky My Oiter If You Interrupt I Oiter Oiter You,
Miss Maxine, Marquisha
Ryan, Ginny, and Raylan DeGeorge.
You are the glorious pigeon mount upon
which this rat knight of a channel rides.
If you like this video, then make sure
to share it with all your pigeon-loving friends.
If you don't have any pigeon-loving friends,
then you should probably make some new friends.
Otherwise, we'll see you next time.
Cheers.
