How to Water Trees Away from a Water Source

Catherine Moravec
3 followers
Jun 18, 2023
How do you water trees that are far away from an irrigation system or building? Catherine demonstrates how to use a bilge pump, watering wand and water tank in the back of a truck to water trees. This method can be used for winter watering, summer watering, watering newly planted trees, or even watering established trees. This is a handy setup that may solve your problem! Learn more at coloradoyardcare.com
Hey everyone, Catherine with Colorado Yard Care.
So we all know that winter watering trees is a really important thing to do
to maintain their health, but what do you do if the trees that you need to water
are far away from any water source? Well let me show you one method that I've
worked out that actually works pretty well.
Okay, so let me show you the setup that we're using today.
This is the back of a pickup truck and we have a tank back here.
This is a 55 gallon tank that's just holding pure water.
In this case we're using a tank that can also be
used as a sprayer but we're not using it as that
for our winter watering. So really you can use any type of tank
50, 5 gallons, 100 gallons, anything that'll just be like a big giant bucket
will work. And then we have a garden hose and that
garden hose on this end is connected to a watering wand you can
see right here. Just a typical watering wand to break
the pressure of the spray from the garden hose.
And then here we have a 12 volt battery and that's used to
power our pump. And so we have these connections here,
that's the positive and then the negative one
that will power our pump. And so what we do is we have
on this side of the garden hose we have a bilge pump and this is
just a regular bilge pump that you can buy
at a boating store. This one happens to be
a 500 gallon per hour bilge pump. It costs $29.99
and you just wire it to run off of the 12 volt battery
over here. So I'm going to drop this down in the tank.
So in this case this one when it came out of the package
it just had straight wires with no clamps on it.
So what we did is we got some wire nuts and then extended the wires
so that it would reach the battery. And then
we bought these little battery clamps at AutoZone.
I'm sure you can find them other places. So when we turn
on the or we connect the clamp to the terminal
you can hear the pump turn on in there and what it's doing is it's just
creating some pressure to start pumping water from the tank
into the garden hose. So you want to make sure that this is as low as possible in
the tank. Now I should mention that this type of
bilge pump does connect to a garden hose. You can see
it already has a threaded fitting built into the pump right here
and that's really important because not all bilge pumps
have that threaded threaded connection. So you want to make sure that you ask for
one that will connect to a regular size
garden hose. And then what happens is that now
when we open this we have water coming out which is really wonderful.
Okay and then this particular watering wand has this really nifty little handle
that will allow the wand to kind of automatically shut off.
So I've connected the pump and it's running
but this is actually off right now. Now if I walk over here and then turn the
handle on you have squeeze the handle then the
water starts coming out and that's really nice because
that allows me to not waste the precious water in this tank. So then we can go over
here and water this tree. This is a beautiful
pinon pine that was planted last fall and desperately needs water
and you can see that this is a really easy way
to winter water trees that are not close to any type of building.
And so our goal here is to just moisten the
the root ball and also some of the soil that's surrounding the root ball
so that the water absorbing roots can take up water and
keep this tree alive. So when I'm actually winter watering the
tree what I try to do is get all the way around the tree particularly
on the west side because that's the side that the winter winds come from and
that's the side that's going to be the most dry.
I water close to the trunk of the tree so that the water will fill up the
slight basin that we've created and that will keep
the root ball moist. But what I also do is I water around the drip line.
So the drip line is just the area of the soil
where the right under the tips of the branches. So where I'm watering right now
is the drip line of this tree and that's where
most of the water absorbing roots will be
and we want to encourage them to grow there. So I water
all the way around the drip line to make sure that that soil
is nice and moist for the water absorbing roots.
Now this particular tree has netting and stakes around it to keep the deer
from rubbing on it while it's still young
so that's why there's this material surrounding the tree.
Okay here's a deciduous tree that I'm going to winter water and I think it
might be a little easier to see the method that I use because
there isn't the netting around the tree. So what I do
is you can see there's a basin here and we're gonna fill up this basin
with water to moisten the existing root ball
but we don't want those roots to stay there forever right?
We want them to grow out into the soil surrounding the root ball.
So we look at this tree and we kind of get an estimate of where the drip line
is and here it's kind of like right around
here so we're gonna water, ah got a branch in
the face, we're gonna water all the way around
the drip line as well. Okay so we kind of move the hose slowly
all the way around the outside of this basin and that's really
important because the roots won't grow into dry soil so you've got
to moisten the soil to make sure that the roots will
eventually grow out there. So water the basin and then water
around the edge of the basin at the drip line.
You know with the 500 gallon per hour bilge pump
the water doesn't come out very quickly but to me this is actually a pretty good
flow rate because if the water was coming out much more
quickly we'd be blasting soil out of this basin.
So for me this is actually a pretty good flow rate for watering trees.
Now this system you can use typically if you're a landscaper and you're
watering a lot of trees or you can also use it if you're a large property owner
and you've got trees that are planted out on small acreage
or even large acreage. If you have any questions about what
products I've used in this video I will post a link on my resources page
at coloradoyardcare.com. Pretty neat system, really simple, pretty
inexpensive to set up and a great way to help your newly
planted trees thrive.
