How to use DJI RS 5 with Ronin App | Full feature guide for Videography

Learn Film Photography
93 followers
1 Video View·Jun 13, 2026
AI Generated·May contain errors
DJI RS series, DJI Ronin app. Users can activate the gimbal, update the firmware,
use intelligent functions using Ronin app. Motor parameters, user profile, can also be adjusted
via the app. System status are also available. Enable Bluetooth on your phone. Launch the Ronin
app, then select the device used. After a successful connection, it automatically
navigates to the device interface, where you can view the gimbal battery level,
mode, and adjust parameters. Create includes virtual joystick, force mobile, panorama,
time lapse, track, and gaming controller. When the gimbal is connected to a focus motor,
focus control is also included. Virtual joystick. Use the virtual joystick in the app to control
the movement of the gimbal and to shoot. Control bar. Control the speed and smoothness of the
gimbal by adjusting the control bar. Roll stick. Control the roll axis movement of the gimbal
using the virtual joystick. Pan. Tilt stick. Control the pan and tilt axis movement of the
using the virtual joystick. Force mobile. Force mobile requires the phone holder and a mobile
phone mounted on a tripod or handlebar vertically. After enabling this feature in the Ronin app,
the gimbal movement can be controlled by tilting and rotating your mobile phone.
Speed determines the relationship between the rotational speed and angle. Smoothness allows
users to control the sensitivity of the gimbal. The lower the smoothness value, the more sensitive
the movement of the gimbal. Panorama. Make sure you have connected the camera and gimbal
with precise control based on the sensor type, lens focal length, overlap, and interval.
Panorama allows users to capture a series of interconnecting still images.
The interval time between shooting photos should be set to one second
more than the shutter time to avoid blurred footage when using a long exposure. After
confirming the camera settings, the panorama range can be set by dragging the white dots
on the grid map, pushing the gimbal manually, or using the virtual joystick. The total range
covered by the end points and the shots required to compose the panorama is displayed above the
map. Tap the shutter record button to begin. You can create a panoramic photo using image
processing software. Timelapse. In timelapse, make sure the camera and gimbal have been connected
using the corresponding camera control cable. The gimbal triggers the camera to capture still
images with the set interval time and will automatically stop when completed. The duration
for the timelapse and the frame rate can be set so that the gimbal can calculate the exact number
of images required by enabling push mode. Users can manually adjust the pan and tilt axis before
starting the timelapse. Tap the virtual joystick icon to use the virtual joystick to adjust the
camera orientation. Motion lapse allows users to set up to five waypoints so that the camera moves
during the timelapse. To adjust the position of a waypoint, adjust the camera to the desired
position. Once this position point is set, adjust the axis arms, set the camera angle to the next
position point, and then tap the plus icon on the screen to add a new position point. Afterwards,
to delete a waypoint, select the waypoint and tap the trash icon. After setting up the waypoints,
you can either tap preview to make sure the motion lapse includes everything or tap the
shutter record button to start shooting. Track. Track is designed to capture video with up to 10
waypoints. Users need to select the waypoint manually by moving the gimbal or using the
virtual joystick. Tap plus to add a waypoint. The duration and stay time can be set on the
waypoint settings screen. After a waypoint is added and the position of the waypoint
also can be reset. The duration parameter below the grid map indicates how much time it will take
for the gimbal to travel from one waypoint to the next. The stay time indicates how long the
gimbal will remain steady at the waypoint before moving to the next waypoint. Gaming controller.
Tap how to use to learn more about the gaming controller. Motor parameters. There are basic
and advanced menus. Stiffness can be displayed and adjusted in the basic menu. In addition,
strength can be adjusted in the advanced menu. Tap auto calibration and the gimbal automatically
calculates the result based on the weight of the gimbal setup. After calibration, you can see
detailed motor diagnostics at the bottom of the screen. If the gimbal is properly balanced,
the power value of the motors should be in the range of plus or minus five. If power consumption
on a particular axis constantly goes beyond that range, check the mechanical balance of the gimbal.
User profile. Gimbal mode. Follow speed. Follow mode. Deadband. Push mode. And joystick control
can be set in this page. Deadband determines how much movement the gimbal tolerates prior to
translating the pan, tilt, and roll movement of the camera. Control settings. Channels. The channel
indicator provides feedback when configuring remote operation. Pan, tilt, and roll channels can be
reassigned and each axis can also be inverted. Normal means the direction of movement is the
same as the joystick. Inverted means the direction of movement is the opposite of the joystick.
You can customize channel mapping by tapping on the name of the axis on the right of the screen.
Motion. You can set the joystick control by adjusting deadband, max speed, smoothness, and
endpoints for each axis. There are three default profiles for each setting. Endpoint limits the
rotational range of the gimbal by setting the endpoints. The pan axis has a slip ring, enabling
the gimbal to rotate continuously when the endpoints are set to 180 degrees. On the tilt
axis, you can set up the endpoints according to your requirements. Some longer lenses may hit
the gimbal frame. Set the endpoint angle to prevent such cases.
