How to Stack a Buttercream Wedding Cake! _ Georgia's Cakes.

Easy & New
22 followers
83 Video Views·Nov 15, 2022
Hey guys, welcome back to my channel.
In this tutorial I'm going to cover how to stack a buttercream cake and decorate it suitable
for a wedding or any celebratory occasion.
Now as you may have seen, I've already done a stacking cake tutorial which some of you
have found really helpful but it was with a naked cake and I think stacking a fully
coated buttercream cake is a totally different ballgame.
It is not easy but it is possible and I'm here to show you exactly how to do it.
So as you can see, I don't have my cake in front of me just yet because I need to do
some preparations beforehand.
So what I do have are several sized cake boards which I'll go through the details in a minute.
I have a drill and I know you're probably thinking, how is this a cake decorating tool?
It's to drill holes in these cake boards which I'll show you quite soon and I've got some
straws and a central dowel and I also have a new guide which I can't wait to show you
as well.
So when it comes to stacking a cake, there can never be sponge and buttercream holding
other sponge and buttercream.
So the cake has supports in such as the straws and each tier is on its own cake board.
So the first thing we need to do is prepare some cake boards.
So I've got a 6 inch and a 4 inch cake board.
So these are the same sizes as my two top tiers of the cake and I've also got two reusable
boards that they're going to sit on but before I do anything, I need to drill a hole in the
centre of these two boards to fit the central dowel inside and this is where this amazing
guide comes in.
So Lissy Lou have created this incredible product which I think every cake maker was
wanting without realising and it's a guide to show you where the centre of a cake board
is so you can mark it and drill through it.
So on here it has all the different sizes and exactly where the centres of the sizes
are.
So this is my 6 inch and if I place it directly under the guide and line it up perfectly,
I can see and I will mark exactly where the centre of the 6 inch board is.
And now I can see where the centre of the 6 inch board is and I'm going to do the same
with the 4 inch.
Mark the centre and I've put the link to this amazing product in the description box of
the video so please go ahead and check one out and I believe they ship globally so wherever
you are in the world, your life is about to be saved.
So now I know where the centre of the board is, I can now drill the hole.
So I'm going to place it over this container, get the drill and point it exactly where I
marked it, which is centre, and drill a hole through.
And the container also catches all the extra bits coming off and of course you just want
to make sure that it is big enough for the stick to go through, which it is, so I can
do the exact same thing on the 4 inch.
And I can already see that the two holes of each board perfectly line up.
And so these boards with the holes in are the boards that are going to go directly under
each tier and so in order to decorate the cakes, I'm going to attach them to these larger
boards just with a bit of tape.
So I'm going to loop the tape around and place it down.
So now that board won't go anywhere when I'm stacking up my cake.
Right, so now these boards are ready for the cakes which have been chilling in the fridge
to get nice and firm, so I'm going to go and bring them and show you how to prepare them.
So what I prepared in advance is my 4 inch cake sandwiched with buttercream.
Now what I did, I actually built it up in the tin with some acetate surrounding it to
get it nice and cold.
And I love doing this technique to make the cake as straight and as level as possible.
I covered this technique in my basic or back to basic wedding cake tutorial, so if you
don't know how to do this, you can always head to my YouTube and check that tutorial
out or I've also got a few clips on Instagram as well if you did want to see how it's done.
The best thing about this technique is that you can actually cut the crumb coat stage
because especially if you've used the freezer, the crumbs kind of solidify to the cake and
if you're careful you can go over the second layer of buttercream without doing the crumb
coat.
But I'll show you what I mean.
What I need to do now though is actually transfer this cake directly onto the cake board that
I just prepared.
And you can see that the smaller cake board is the same size as the cake.
So I'm going to place this onto my turntable and here I've just got some of my plain white
Swiss meringue buttercream and I'm going to pipe a little bit of buttercream onto the
surface of the cake board and that's just going to be used to stick the cake down.
Now I can get the cake and place it directly onto that cake board and lift up the tin.
And what's left behind is a perfectly straight cake, so I'm going to take off this acetate
and I did keep the paper on the very top because I wanted it to come out of the tin.
And now I can go on with my second layer of buttercream.
So because there's no crumb coat, I want to make sure that the second layer is quite nice
and thick.
So I'm going to really squeeze on that buttercream to get a good layer and pipe my way up the
sides of the cake, keeping that pressure even so the same amount of buttercream is all the
way around the cake.
And the great thing about piping on this buttercream is that you do ensure an even layer on the
outside.
I'm going to do the very top as well and before I go and smooth the sides, I want to get that
top nice and flat.
So with the side of my palette knife and rotating the turntable, I'm going to flatten out the
top and any excess buttercream I can keep.
And now I'll go around the sides with my side scraper but with very little pressure.
I don't want to be taking off this buttercream, I want to be smoothing it out.
Again, if you're careful, no crumbs will be in this layer.
A few slower times around the cake just to smoothen out that final finish.
So something I forgot to mention as well is that when I'm doing a tiered cake, I actually
like starting off with a smaller tier because that's going to be going on last and it's
the most fiddly.
So I want this to get as cold as possible which is why I started off with the 4 inch
rather than the 6 or 8 inch.
So I'm going to set this in the freezer.
You can see that I've left the corners rough.
Because it's going in the freezer, I might as well get them nice and sharp.
So I'm going to put this one in the freezer and get my 6 inch cake.
So my 6 inch cake was prepared the exact same way as the 4 inch cake and this cake is going
to go onto this board so the silver board is the same size as the 6 inch cake.
So once again, I'm going to place some buttercream down onto the board.
And this cake was a little bit shorter than the acetate so I'm going to take it out the
tin and place it directly onto that smaller cake board.
Remove the acetate.
You can really see how much straighter it is when you do use that acetate technique.
And once again, go on with this second layer of buttercream.
Nice and thick.
Starting from the bottom and working my way up the sides of the cake all the way to the
top.
With my palette knife, I'm just going to flatten out that top, turning my turntable and using
the side of the palette knife to create a nice, flat, even top.
And now I can go around the sides with the scraper and smoothen out that buttercream.
Once again, I'm leaving the corners rough.
I'm going to cut them after the freezer.
This is going to go in the freezer for a good 20 minutes and I'm going to decorate the 8
inch which is my largest tier of this cake.
So this 8 inch cake is going to be the base layer of my 3 tier cake and I've crumb coated
this just like usual.
I forgot to say that if you did want to crumb coat your other tiers just to be on the safer
side, then you need to build them up on that smaller cake board.
So the one that you drilled the hole in, sellotape that to the larger cake board and then build
the cake layer straight on top of that cake board.
Because I built them in the tin, I stuck it on after.
But this bottom layer doesn't need an extra cake board underneath.
So I've got a slightly larger clear one on here.
You can use a cake drum or something a bit more decorative if you're going to be displaying
the cake on this.
So what I'm going to do now is just go directly on with that second layer of buttercream using
the piping bag just like I did on the other tiers, starting from the bottom and all the
way up the cake.
Just spread that buttercream out just like I did before.
And what I like doing with the larger tiers is actually use my side scraper to make sure
the top's nice and flat.
So I don't push a lot.
I just glide the weight of the scraper over the top.
And that kind of acts like a large palette knife.
If you've got a large palette knife, you can also do that too.
But I do like finishing it off with the palette knife to get that smooth finish.
And now around the sides.
And I always finish off with these slower motions to get that smoother finish.
Their sides are straight and smooth.
Once again, I've left the corners because this is going to get nice and cold and I can
trim them off sharp.
Now the biggest, most important thing to remember when you're doing a buttercream coated cake,
especially when you're stacking it, is to have the cakes as cold as possible.
So even if that means you want to spread the cake decorating process over a few days and
have them sit in the fridge overnight, just so the buttercream isn't ruined when you
start stacking them.
So I've got a freezer to help speed up the process.
So I'm going to put this in the freezer before I do any doweling or trimming corners or anything.
I want the buttercream cold and therefore you're not going to ruin your cake as much.
It's really important to remember that.
So I'm going to put this in the freezer for 20 minutes and then I'm going to trim off
the corners and prepare it for stacking.
Alright, so bottom tier, completely cold.
The buttercream is nice and firm so I'm going to start by trimming off the corners with
a sharp knife.
So slowly, slowly, I'm just going to glide the knife around the edges and lift up the
excess buttercream.
And I've got my excess buttercream bowl next to me.
So I'm cutting the corners until it's totally flush with the top of the cake because I don't
want to see any ledges or anything.
So now it's time to make this as stable as possible because two more tiers of cake are
going to sit on top of it.
So this is where the straws and dowels come in.
So I've got a centre dowel.
This is best for when you're travelling with the cake or if it's going to another destination.
It avoids the cake from tilting and it just is a lot more secure.
Usually for two tiered cakes, I wouldn't really bother using a central dowel but if you feel
more comfortable doing it then absolutely do.
We want to put this as central as possible so I'm going to use the guide once again.
I'm going to place the guide this time on top of the cake and because the cake is cold,
it doesn't matter that the guide touches it.
And because there's buttercream on it, it is slightly larger than the 8 inch so I'm
going to line it up and then with a toothpick, mark where the middle is.
Now I can see where the centre is, I can put the dowel.
Make sure it's straight.
That looks good and now I'm going to go in with some straws.
So these straws are going to act as even more support for the tier but these aren't going
to stay this height.
I'm going to cut them to the same height as the cake but what I want to do is insert each
straw first and then I'll cut them to size afterwards.
So I like using brightly coloured straws just so they're as obvious as possible for the
person who's going to be cutting the cake.
So I've got five straws in this tier and now I can trim them to size so I like to give
it a little wiggle to mark where the buttercream finishes, pull it up a little bit, trim with
scissors and press it back down so it's flush against the top of the cake and I can't stress
enough how important it is for the cake to be cold at this point, especially because
you're now going in with your fingers.
And it's these straws that are going to hold that cake board that's under the 6 inch which
is going to go next.
So this cake is ready to go but I need to trim the corners from the 6 inch cake first
so I'm going to put this back in the fridge so it stays cold.
Once again, so important for the cake to be as cold as possible especially because we're
going to start adding our other tiers.
So sixth tier from the freezer, again buttercream's firm so I'm going to chop off the corners,
same as last time.
Obviously there's not going to be a central dowel in this right now because this is going
to fit on top of the one that I did previously but I do want to put the straws in this tier
because it's going to be holding the 4 inch on top.
Now a 4 inch cake is a very small and light cake so only two straws is more than enough
but I obviously don't want to put them in the centre so I'm going to space them out
a little bit.
One on this side and one here.
Cut and push down.
So this is ready to stack but I still need to do the corners of the 4 inch so I'm going
to put this back in the freezer, get nice and cold and then do all the stacking when
all of the cakes are completely cold again.
Finally the 4 inch, nice and small, I love this size.
Cut the corners off and because the 4 inch is the top tier it's not going to have any
cake balancing on top of it so it doesn't need any dowels or anything, I'm just going
to put this back in the freezer and get on with the larger cakes.
Okay finally, the stacking stage.
So bottom tier, ready, dowels, ready to go.
I've put all my excess buttercream into a smaller piping bag and we need some glue in
between the tiers so I'm just going to pipe a little bit of buttercream just around the
centre of that dowel.
And now I'm going to take off this cake.
With my palette knife I like to go underneath and try and detach it from the tape that was
keeping the two boards together.
Lift it up, now you can probably see why it's better to have a cold cake.
Take off the tape and line it up with the holes and then carefully drop the cake downwards
and hopefully the dowel will come up through the centre of the cake like so.
Just going to remove this bit of excess, sometimes it can get a bit crummy and some of the buttercream
may come off a little bit but that has come up directly in the centre.
That looks great.
So obviously we have a little gap around the middle here.
So this is where the extra buttercream comes in.
I've cut a really small hole in the piping bag and I'm just going to go around that very
bottom edge and fill it in.
So obviously if you were doing any coloured cake you would do exactly the same as this.
You don't want to be putting too much on because now we will go over with the scraper
but I'm going to just focus around that very bottom edge.
Take off any excess.
Because the cake is cold it shouldn't get affected too much.
All right now I'm going to get the four inch cake.
So four inch cake nice and cold.
Before it goes on I want to put a little bit of buttercream around the top for that cake
to stick to.
Remove the board from the other board, take off the tape, line up the hole once again.
There we go.
Because it's cold I actually like using this harder board to press on the top and try and
align it as much as I can.
There that looks really good.
Extremely central and now I'm going to do the exact same thing around the very bottom
edge of this tier.
And then with the scraper.
Perfect.
So because it's wedding season or in the summer and I'm doing a tiered cake I'm going to
decorate this like a wedding cake with some fresh flowers.
So I'm going to grab the flowers and show you how I finish this off.
So what I've prepared are some fresh flowers.
I've shown over the years multiple ways how to attach fresh flowers to your cake if they're
not edible.
Here's a really quick and easy way of doing it.
I've left one unprepared just to show you.
So I've cut the stem fairly short of the flower and all I'm going to do is insert a toothpick
to the end.
So this works really well with larger flower heads because you can actually insert the
toothpick right into the stem.
But if you want to do smaller bunches of smaller flowers you just wrap the stems around the
toothpick with the florist tape which comes next.
So florist tape doesn't appear sticky straight away but it gets sticky as you work with it.
So with the florist tape I'm going to wrap the stem around the tape and then attach it
to the toothpick.
So the florist tape prevents any leakage from the flower coming onto the cake but essentially
it's just going to be the toothpick inserting to the cake anyway.
So this is a really easy and safe method to attach flowers to the cake.
So I've got all of these flowers here and I've also got some lovely leaves as well and
I'm just going to go on with a nice little waterfall and then some gold leaf to finish.
Placing the toothpick directly into the cake like this and then go on with the remaining
flowers at different angles.
And I'm just going to finish off with some touches of gold leaf.
And there we have it, a three tier fully buttercream coated cake.
I hope you found this tutorial helpful and got over any fears that you may have had when
making tiered buttercream cakes.
If you have any suggestions of any other tutorials that you want to see on my channel then please
write in the comment box below and don't forget to subscribe to this channel and of course
like this video too.
I hope you enjoyed it and we'll see you very soon.
